I can't access my public folder

Similar Questions

• Cannot access my public folder when my firewall is on

  I can't access my public folder when my firewall is turned on. But can access it when my firewall is disabled. I already activated the public folder sharing and file sharing.

  Also, I don't see computers connected to my computer when their firewall is enabled and can see when their firewall is disabled. Why is this?

  You must configure your firewall properly instead of turning market.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  If you would like more information, please provide these details:

  1 levels systems operation/versions/Service Pack of all machines.
  2. name of antivirus/security software used.
  MS - MVP - Elephant Boy computers - don't panic!

• Can't share a public folder

  We have several computers in an office that appear on the 4 different networks. Most are Win7, one or 2 are XP. All are executed in a switch, then a common gateway. How can I get them all on 1 network so that we can put in place a public shared folder to access the same files? I'm not the most brilliant, nor the lower bulb in the box, but according to me, I lack something.

  Hi Candace,

  • What is the version of the Windows 7 machine that you use (Starter, Home Basic, professional, Ultimate or Enterprise)?

  If your organization uses Active Directory domains to manage its network, you may need to know the domain that a computer belongs to so that you can access other computers and resources on the network.

  1. System opened by clicking on the button start , right click on computer and then click Properties.

  2. If your computer is connected to a domain, under the name of the computer, domain, and workgroup settings, you will see the domain name that your computer belongs. If your computer is connected to a workgroup, you will see the name of the workgroup your computer belongs.

  Or you can just ask IT member of the team if these computers are connected to the domain network.

• How can I access the profile folder?

  IOriginal title: profile disappeared

  I had a user account under 'Pierre' (I am the only user/administrator) in which there were many folders (travel, photos, music,...). This folder/account is not accessible and visible in the Solution Explorer. Yet, when I do a search under 'C' it is still there under c/users and I can copy files and folders from there to store them in a different folder where I do not have access to the future.

  How can I do this immediately accessible account again under explore with all the data that was there without recourse to this procedure of workaround/copy of humungus? Dozen thank you!

  Stone

  What you reference is not an account, but a profile folder. It's probably hidden. You now need to tell Windows Explorer to show hidden folders: Tools / Folder Options / view / show hidden files, folders and drives. When you see then it again, by that you can view it right click it and checking its properties.

  To be the only 'administrator': it is a very risky way of running things. In this forum we receive a flood of requests from people whose one and only admin account has failed for some reason any. Plan in advance and creating, testing and documenting an alternative admin account would you save a lot of trouble.

• How can I access my music folder by using the start menu. I'm used to be able to do.

  When I turned on my computer this morning, I wanted to go to my music folder that I normally have access using the 'start' button in the lower left corner of the screen. Normally, I get instant access. Today, I get a message that needs to close Internet Explorer. I am currently using Firefox as my browser, just to try out it. I use Windows XP Home Edition.

  When I turned on my computer this morning, I wanted to go to my music folder that I normally have access using the 'start' button in the lower left corner of the screen. Normally, I get instant access. Today, I get a message that needs to close Internet Explorer. I am currently using Firefox as my browser, just to try out it. I use Windows XP Home Edition.

  ==================================
  If you go to... My Documents, then my music
  It works no better?

• How can I access my app folder... BlackBerry Playbook os

  Location:

  My webwork app works fine except for one thing. I have a button that needs to open a pdf file that is buddled with the app say its in the root directory and its test.pdf named. My idea was to locate the position of the file (to find the path of the application). Then use call function to launch the adobe reader software to open the file.

  ex: path-of-my-app/test.pdf

  I came across this:

  BlackBerry.IO.dir.app.Storage.Path + "test.pdf".

  BlackBerry.Invoke.Invoke ({}
  target: "com.rim.bb.app.adobeReader."
  Action: "bb.action.OPEN."
  type: "application/pdf"
  URI: dir.app.storage.path + "test.pdf".
  (}, onSuccess, onError);

  It seems that the way invoke does not work for BB playbook os.

  Can someone help me with this?

  Thank you very much!

  problem solved:

  I have corrected the action script code:

  public function stringToBlob(data:String, encoding:String):Object
  {
             var characterSet:String = translateEncodingIntoASCharacterSet(encoding);
              var ba:ByteArray = new ByteArray();
              if (characterSet == "base64")
              {
                  var base64Encoder:Base64Encoder = new Base64Encoder();
                  base64Encoder.encode(data);
                  ba.writeUTFBytes(base64Encoder.toString());
              }
          else if (characterSet == "binary")
          {
          var base64Decoder:Base64Decoder = new Base64Decoder();
                  base64Decoder.decode(data);
                  ba = base64Decoder.toByteArray();
          }
              else
              {
                  ba.writeMultiByte(data, characterSet);
              }
  
              var bm:BlobManager = getBlobManager();
              var blobId:String = bm.createBlob(ba).id;
  
              return new WebWorksReturnValue(blobId).jsonObject;
          }
  
  http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/stringToblog-save-image-problem/...
  
  Thanks for all peardox!!!!!!!!!
  

• I can't access the startup folder

  My computer has been terribly slow. It runs Windows Vista Ultimate Service Pack 2.
  I thought to reduce the number of startup programs.
  Click on the change of starting programs in control.
  I get the message in a window pops up: Windows Defender is disabled. She added turn on and open windows defender.
  When I click on this link: I get the Windows of your authorization needs to continue. When I click on allow that I get the message «Windows defender...» »
  I'm kind of a loop.
  In a nutshell, that's the problem.

  Another way to access the startup programs.

  Attention... Make sure you understand the function of the program UNTIL you turn it off.

  Start > Search box, type msconfig > Enter > Startup tab > here is the list of startup programs.

  to disable... Uncheck the box in front.

  to activate the checkbox....

  Click OK when finished.

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't open my pictures folder - message "windows Explorer has stopped working"!

  I have a Toshiba Satellite A305 (Harman/Kardon) with Vista Home Premium, 32-bit operating system.  For about a week now, I can not access my photos folder.  When I try to open I get a message telling me that Windows Explorer has stopped working, then another telling me to restart.
  I ran a full scan with my Norton program but no virus found.  Following the suggestions made on this forum, I have disabled all non-Microsoft software but still getting the same message.  Run the File System Check and after that 'complete 100% verification' I received a message that: "Windows resource protection found corrupt files but was unable to solve some of them."
  What does that mean?  How can I find out what files are corrupt? How can I fix it?

  He also said that the details are included in the CBS.log windir\logs\cbs\cbs.log journal
  I tried to get more details of cbs.log (according to the directions on this site), but when I type the command I am told to type, nothing happens.
  I don't know what else to try.  Help!

  the problem report:-

  Product

  Windows Explorer

  Problem

  Stopped working

  Date

  28/08/2009-01:29

  Status

  Reported

  Signature of the problem

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.0.6001.18164

  Application timestamp: 4907e242

  Fault Module name: MSVCR80.dll

  Fault Module Version: 8.0.50727.3053

  Fault Module Timestamp: 4889d 619

  Exception code: c0000005

  Exception offset: 0001500a

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Information additional 01:40 d 4

  More information 2: 4062ad41ec8067256aa4c5e2b56d3c79

  Information additional 03:40 d 4

  Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c79

  Same problem here. I found that I had some .mov files in the same directory of photos. Move the movie files solves the problem.

• Cannot access any shared folder on the network of windows 7 Professional

  Hello

  I have a very strange problem.

  I have a home network with 4 computers.
  I can share files from any computer to the other.

  Recently, I bought a new laptop Lenovo E530 in with Windows 7 Professional installed on it.

  The problem is that I can't access any shared folder on my home network by '\\com-name '.

  I cannot yet access the folders on the computer that is shared from the inside, by specifying there name with the prefix "\".

  However, I can ping or even make remote desktop on other computers on my network.

  I can also access shared folders on my Windows 7 Professional from other computers.

  Looks like there is something wrong with the configuration of my OS from Windows 7 Professional blocking access to any shared folder on my network.

  I get the following error message:

  Windows cannot access \\comp-name

  Check the spelling of the name. Otherwise, it could...

  Error code: 0 x 80070035

  The network path was not found.

  I tried to use the button to diagnose, but without success.

  Help, please

  Dudi.

  Hello

  I suggest you try all the steps from the following link:

  Sharing of files and printers
  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also: File and printer sharing: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Cannot access the SMS folder blackBerry smartphones

  I just bought my "BOLD" about a month ago.  Since yesterday, I can't access my SMS folder, but I can access my mail and messenger. I can still make and receive calls.  The error message seems to be "Eception exception: java.lang.NullPointer Exception" can anyone help?

  Thank you. It worked.

• Windows local service cannot access a shared folder

  Hi all

  Here's my question,
  My application (windows service) can not access the shared folder. What should I do to make this access?
  client OS (where my app): windows 2003 R2
  Server operating system (where the shared folder is): windows 7
  I tried to add login ANONYMOUS for authorization groups and that each has the access rights on the shared folder, but it does not work
  Please help on this.
  Thank you
  Levi

  Hi Levi,

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• Remote access to public folders - password

  On this HP Pavilion HPE h8-1020 desktop computer, I want to access the public folders to another system that connect wirelessly to the network. However, I would like to restrict access to the only people who have a password. I was able to enter 'Network & sharing Center' in the 'advanced sharing settings' section and deselect the password option, which allows the connection of a computer to another, but would also allow someone on the street to access these "public" folders These records contain information that is not really public. How can I determine the user name and the password to use when I re - select the password option?

  I have not implemented 'users' on each machine. Maybe it's the access protected by a key. ???

  This issue has been resolved by my realization that the Wi - Fi protected by, only those who have permission can also access these "public" files Since only those who authorize have access to this same address wireless, it is unlikely that others would be able to view these files.

• You don't have permission to access this folder. Can't access iTunes.

  Original title: user account access changed without being changed.

  Hello

  I have a new computer with Windows 7 Professional. Today, I tried to run iTunes. He said I may not access the folder or it has been locked. Of course my user folder has a big lock next to him. I am the administrator. I have not changed the permissions. Currently, it seems that I have somehow connected with a different account. My library on my C drive folders are empty. This would explain why iTunes does not load. As I said I have not changed any settings. It happened as if by magic...

  How my user folder has being blocked or how my user account has changed its permissions, as an administrator, I should have access to my user folder, or I am now another user? Who is now the administrator? -What happened? A lot of questions. I am happy to be able to see the library files on the C drive, I used to be able to the week last in any profile.

  Any ideas?

  Hello

  After reading this post

  http://social.answers.Microsoft.com/forums/en/w7programs/thread/d616e06f-ecdd-4D34-8d7a-a9936a91ad6e

  I went my users folder and tried to set the permissions again.

  I have 4 users or group names

  System

  [username] ([username] - PC\ [username])

  Individuals ([username] - PC\HomeUsers)

  Administrators ([username] - PC\Administrators)

  When I wnet in the advanced on ther Security tab my 'home ([username] - PC\HomeUsers) users' group had special permits. I selected it and then click on change permissions. Another very similar screen came. I have selected the Group of users of home again and press Edit I selected a full control. All the checkboxes selected themselves. I hit OK, and then click apply. A box appeared that set permissions. I have several errors telling me that permission could not be set. I kept acknowleding and continues. Once the lock on my users folder disappeared. But iTunes still does not work.

  If the lock on my users folder has dissappeared. iTunes still won't work and I think I just make my Connection public network vulnerable to attacks. Great :)

  In any case, I really need to download iTunes running.

  I open my account users (without lock) and try to access my music folder it tells me

  You do not have currenmtly has the permission to access this folder

  Click on continue to have access to this folder permainently

  I click on continue. A padlock appears next to my music folder, but I have access and Itunes now runs.

  All good and well, but I noe feel as if I had a bride mish bad permissions which will expose undoutedly me to safety and is still not right.

  How do I check the permissions?

  I believe that the passage of the group to public networks may have been when the problem started. I'm guessing that I'm not alone with this problem.

  My video files and images all wanted to set their access permannet permissions and now have a lock next to them

  I'm willing to do all this right. Seems not just for now, but then again I can't access my data and run my programs again. How can I check to see if I'm now vulnerable to attacks on public networks?

  Concerning

  Nigel

• How can I access files in a folder from iCloud, that I created on my iPhone

  I have a folder of recipes on my IMac. (mostly in pdf to maintain a size reduced) On the IMac in iCloud drive, I created a new folder. "recipes" I can drag my IMac files ' folder of recipes in the folder of the I.C. drive, but how can I see and access on my iPhone & iPad?

  If you really want to use icloud pilot, by that you can try the Readdle Documents

  https://iTunes.Apple.com/us/app/documents-5-fast-PDF-reader/id364901807?Mt=8

  You can also try the indirect approach, the synchronization of these files with ibooks instead of icloud by using itunes, which would require, knowing how direct and connection or you can try to create document in Pages and use the Pages on your phone, granted that it's a great app to have.

  Credit for the suggestion of the app goes to Csound.