I can't access the BIOS to change the boot on Satellite 2410 order
I can't access the CMOS change boot priorityre. Help!
Laptop Satellite S2410-504.
I try normally press 'C' at startup to boot from the CD-ROM. but it does not work.
F12 do not help too.
I think that some define some password on HWUtility, but how to disable this password?
Help, please!
Hello
Try to enter the BIOS settings using the ESC key at the beginning upward.
Tags: Toshiba
Similar Questions
-
hp blue circle on black screen, can\ ' t access the boot options for the recovery disc
I have installed Symantec disk full encryption and encrypted hard drive. Then I restarted the pc. I get a black screen with a blue HP logo in the Center. The low right sysa message press the ESC key for startup menu, but no key is working. Each button gets a beep. If I turn the power off, then on and press the various f keys, I get different messages but still no answer from all the keys.
Symantec sent a disc of recovery for deencrypt the drive, but I can't get the pc to load from the drive. Any thoughts?. I reset the computer twice (battery and power cord, hold the power button / stop for 30 seconds)
I remove the hard drive and then turn on the laptop to see what answer the BIOS.
From your description of the problem, it sounds as if you may have encrypted the whole disc rather than only the C: volume or the BIOS ROM file is damaged.
You should be able to go beyond the HP screen to access the BIOS.
The BIOS should give complain that it cannot find a drive with a bootable operating system.
If this happens, and you have the recovery disk set or usb recovery media, life is good and you will need to take a look at the Symantek forum to see how to proceed with your encrypted drive.
If it does not then, the problem is the BIOS on the system board.
By pressing the ESC key and have the start menu appear is conditional on the BIOS being in good condition. Yours may be damaged. Try download a softpaq BIOS on another PC, extract the BIOS ROM file and put it on the root of a usb key. Put the USB key into a USB port on the laptop. Press the power button and immediately hold down the Windows key and start receiving the B key. If it works and you see an led flash, release the keys and wait. the process must load a BIOS file to replace the one damaged. This takes time, so be patient if you see a blinking led or no reaction from the laptop for a few minutes.
Post your results here and we can take the next steps, you can take.
Best regards
ERICO
-
How can I access the boot of a lenovo a2109?
Hello. I have a lenovo, a China shop. the thing is that the tablet had no google shop installed (only the lenovo, in Chinese), so when I tried to install the Google store, it did not work. I downloaded (A2109 us firmware A2109A_A404_02_04_120821_LV_Weekly_SDCard_722_WW_CF), but I can manage to install it. Cand you help me please with that?. Thank you!
Place the firmware on your external sd card. Next time you start after the recovery. To do this, shutdown, then market back and immediately start typing Volume upward. If you have adb work, you can also do "adb reboot recovery '.
-
I can't access the IP4 properties to change the ip address.
I can't access the IP4 properties to change the ip address. The laptop connects to the network and has the internet connection but when I try to set a specific ip address tab of connection properties for ip4 and ip6 wireless network is grayed out. Is there a setting in Vista the automatically it controls and does not allow access to change?
I put IPs for the other 5 computers at home for use via my wireless router and have no problem with any other computer but one of Vista.
Hello Jimmy,.
I recommend trying the steps described in the Jack post that is marked as an answer in this thread:The thread is in the Windows 7 forum, but the diagnosis also applies to Windows Vista. -
I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.
Hi rgarden95,
Can you please confirm the exact version of Muse, you open the file with?
To check the version of Muse, please click Help-> on Adobe Muse CC.
Kind regards
Akshay
-
I can't access the function in the panels on the right. Open the control panel but I can't click on anything.
I can also change the font size, etc. after Select test.
I have reset the preferences, but does that to let me use my tool of choice now.
You set the font size of Windows at 150%. Set it to it's default of 100% or disable aero.
Bob
-
I can't access the configuration screens that they show that I need to access.
What is a forum. I don't understand. I'm 63 and they will not access my computer at ADobe
I can't access the configuration screens that they show that I need to access.
What do you need access? When you encounter a problem?
What is a forum. I don't understand.
A forum is a place which provides for exchanges between users.
-
Lack the profile can not access the Profile Manager, cannot be continued
Yahoo somehow accessed and changed the settings of my browsers safari and firefox, could not change the settings for search engine default for more than a minute, even remove engine from yahoo wouldn't last a minute, so I deleted firefox, re-uploaded, now my profile is missing...
I can not access the Profile Manager via the Terminal, I can't do anything, Firefox is not operational at this time and I don't know how to fix it.
In Mac OS X v10.7 and later versions, the ~/Library folder is a hidden folder.
- http://KB.mozillazine.org/Show_hidden_files_and_folders#Mac_os_x
- http://KB.mozillazine.org/Profile_folder_-_Firefox#Mac
- < User > /users//Library/Application Support/Firefox/profiles.ini
See also:
-
can't access advance settings to change settings in apple mail
Can't access advance tab to change the settings in apple mail. Front, once I found a key to click to open it, but forgot how.
If you see a small lock in the lower left corner of the preferences window, click on it and enter your admin password to open the lock.
-
Cannot access the boot on my Qosmio G30 or Bios ESC options menu
Hello world!
I can't access the menu of options or F12 boot Bios ESC...
I wanted to recover the laptop but then 1 HDD Raid-1 has deteriorated.
Now, the laptop only starts in the qosmio dvd player / tv tool. How to reset the RAID settings? How remove the hidden partition on the hard drive so I can access bios again?
Can someone help me?
Thx a lot
What happen exactly when you start your laptop?
You see Qosmio welcome screen? Are the options for the BIOS and settings menu start displayed in the bottom task bar? -
Connection impossible access area properties
When I click on properties in my tab of connection area I can't access the properties settings. I need to change the settings of ip address of my connection to the local network on my laptopHello fazlurslemming,
1. may I know why you must change the setting of IP address on your laptop?
2. are you able to connect to the internet?
3. what version of windows are you using?Visit the below link to find the steps to change the IP address on a windows 7 installed system:
http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
Post back with the State. -
I can't access the internet. I get a message that I do not have a network card.
I can't access the internect in my Pavilion s3707c slimline, message window: do not have a network card, replace a
Message: no netwrok (from my HP pavilion s3707c) adapter, needinstall it and configurad, where and how can I buy a new installation? can I buy a USB WiFi dongle for instead? What kind? Pls help, yourhelp are much appreciated.Hi eddy Chow.
· What version of the operating system is installed on the computer?
· Did you do changes on the computer before the show?
· It was working fine?
Follow the steps in the article.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
For reference:
Windows wireless and wired network connection problems
http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3882331
If the problem persists, contact HP support for more help and information.
-
My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before. My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?
original title: internet connection.Hi vonhatten,
- Did you the latest changes on the computer?
- You receive an error message when you try to connect to the internet?
- You have security software installed on the computer?
Refer to the article below and try the steps mentioned, check if it helps.
In Windows network connection issues
-
I just uninstalled MSE and installed Norton. Now I can't access the internet. I have vista Home premium. my internet works on all the other PCs in the House. the computer shows I have internet acess, but tells me that I can't Conect on the web. I used restore to an earlier date without change. What can I do?
Well, I just thought about it. I started in safe mode and uninstalled Norton and safety package provided with Norton from Comcast. It was the solution. I don't know if it was Norton, safety package, or both, but I'm back to MSE and perfect performance. I hope this can help someone else. Thank you
-
Help! I can't access the control panel
Help, please. I can't access the control panel, it ask me to the user and the password but I don't remember to have them change! I tried with admin/admin, but nothing, I tried to reset with buttom for 5 seconds but nothing... I'm desperate!
Linksys WAG320N
Press and hold the button of reset for 30 seconds, then release it. Wait 10 seconds and cycle power to the router. Now connect to 192.168.1.1 username "admin", password "admin". I'm sure that the WAG uses these passwords. Try now.
Maybe you are looking for
-
Hello My Lapotp is CQ60-110F and product number : FT281EA #ABV I hate Vista and I want to get drivers XP for my laptop before I even try to install Windows XP. Thanks in advance
-
I have a C660 which is around the age of 18 months, and I had some problems with it since I got it. However, over the past month, she started closing while playing some games like Minecraft, little Inferno and worms. I'm sure it's because she is over
-
I have recently to repair my device.my screen of the device has been damaged and I send for repair and believe me they provide great service they provide new view according to me, I am me mobile again when I saw the first time... Thank you so much fo
-
Add a folder of files with the hierarchy to the installer
Hi all Have a folder of files that can be read by the app. This folder has a hierarchy of other records and contains xml files. I just want to include this file and all files with the hierarchy with installer and add to the Application directory. I
-
Problem with Admin Windows xp RUN As...
1. What is the exact error message when you try to run it on Windows XP?There is not an error. Just not running. Key program accepts and stored, the AutoRun program does not work. 2. is the application works properly in Windows 7? Yes, exactlyKey sav