I can't be diverted to the other web site via Safari or even I tried yahoo, I don't know if there were bugs after updating IOS 9.3 caused this problems?

Similar Questions

• I can reinstall Windows 7 from the Microsoft Web site free of charge, or I have to go buy Windows 7?

  I have a HP laptop about 3 years. I don't have the disks with it to reinstall.  I have trouble starting up. Best Buys geeksquad says to reinstall windows 7.

  If I can get on the internet can I reinstall from the Microsoft Web site free of charge or I have to go buy windows 7.  If I have to buy that I would be better off to buy windows 8?

  Original title: reinstall Windows 7

  Hello

  Welcome to the Microsoft community!

  You can either reinstall the computer, which means it will have ANYTHING to this topic, or you can do a system restore when it was working fine.

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/system-restore

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01867418

  I hope that the above suggestions work!

  See you soon,.

  Leo

• Can't see the other Web sites I created

  In BusinessCatalyst, I'm doing the dashboard of one of my sites, and it let me just get one, not the other. Can someone tell me how to change the dashboard from other sites I have the catalyst?  Using the old interface of catalyst that I could move around, it seems now I'm stuck on one site and can't seem to others.

  Very frustrated!  Help, please!

  Annette

  Oh my God, Brad, who did it!  Thank you, thank you, thank you!  I was just about at my wits end!  Geez, you'd think go on your dashboard would you outline your sites and make it easy for you to access all of them.

  Anyway, I'm not on and on, but I thank you very much for your quick response and accurate!

  Annette

• Will be Apple renovate an iMac 27 "retina with VESA mount? I know that I can't do it on the Apple Web site.

  The header says it all.

  Probably not, because it's a setup of command which is made during the build...

  See > http://www.apple.com/shop/buy-mac/imac-vesa

  To double-check, call Apple support or your Apple store and ask.

  See > https://locate.apple.com/

  For other VESA mount options that use a stand of the iMac.

  See > http://www.imacmount.com/

  and > http://eshop.macsales.com/item/Newer%20Technology/NUMNTIMVS

• Why when I open the other Web site I don't see photo

  the website asialadyintroductions.com when I open it, I don't see the pictures of me and my friends colleagues... Why

  URL of affected sites

  http://www.asialadyintroductions.com

  Why when I open www.asialadyintroductions.com

  I can't see all the images.

• In Hotmail, I can see only the Inbox but can't open messages. Also, I can not open all of the other categories. It is only with my netbook and is a recent problem. From an office, the account is fine.

  I was read and send e-mails from my netbook and desktop computer without problem. This week, on my netbook, I can only Hotmail and see the Inbox. I can not open the mail, nor can I open one of the other sections or even get to page 2 of the Inbox. There is no problem with the desktop computer. Is there something I may be changed by chance on the netbook that prevents me from using Hotmail? Thanks for any help you can give me.

  Hello Sheila and R. BruceMacdonald,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Firefox browser will not move to the office. Other browsers have no problem on the same Web site. ??

  Browser hangs and will not move through or around the office. Using
  rt click disobeys. (sometimes it also locks).
  Other browsers are moving very well with
  Same or similar plugins

  Thank you

  Dale

  I had this problem with Firefox version 15 and found out it was because of the theme I had installed. As soon as I changed back to generic theme of firefox browser was able to move freely again. Some themes work very well but there are some that causes this problem of the browser do not move with left click the top title bar.

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on t

  Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on this issue.

  single user licenses allow you to use the adobe corporate programs and allow to sell the products that you create using adobe programs.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Only when I try to connect to the hotmail Web site, internet explore said that he can not access the Web site?

  I was able to access hotmail account every day except today I tried several times to connect to the site on the Web page, but internet Explorer comes up with the error message that it cannot connect to the Web site.  I tried a diagnostic check on my end, and nothing seems to be wrong.  I can access other Web sites.  I tried the suggested methods to clear my browser which has been online on the microsoft answers site.  Nothing has done so far.

  Status of Hotmail:
  https://status.live.com/detail/Hotmail

  For now, it is said there is a problem:
  "Hotmail is having connection problems. You might see an error message when you try to connect. »

  You can try to check your email at a later date.

  For the taking in charge of Hotmail:

  http://windowslivehelp.com/product.aspx?ProductID=1

• After format and install Win XP Home and SP3 why can't open the Microsoft web sites?

  Need help, guys

  I had to replace my HARD drive in my computer. I installed my Windows XP Home SP2 disc. After installation, I used my SP3 upgrade drive and my drive to upgrade to IE8. After you install all my drivers, I tried to get Windows dates and discovered that I could not access the Microsoft web sites. I get Internet Explorer cannot display this page. I tried to find out why this is happening and how to correct the situation, but have not found an answer that works yet. Can someone give me an answer to this question.

  I have another (used) computer that I formatted the HDD installed and on Windows 7 and have had no problems to access the Microsoft web sites on. It uses the same modem cable like the other computer so I guess that everything is ok with my Internet connection. This problem seems to be only with Windows XP Home SP 3.

  Think in advance for any help

  Btk (billy the kid)

  Please do not share in the whole "BOLD". Which makes it hard to read!

  Please check that SP3 is installed:
  Start | Run
  Type:
  winver
  Press OK.
  Also, tell us what you mean by "trying to get Windows dates" since there are two ways to do this!

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How do we uninstall the maps4pc software, I tried everything I don't know and can't get rid of it, I can't do same hidden.

  How do we uninstall the maps4pc software, I tried everything I don't know and can't get rid of it, I can't do same hidden. It is what makes the impossible using other programs. Help! I only wanted a card and got it *.

  Hi RA48,

  I'm sorry to hear that you are facing problem with software uninstall PC Maps4. I would like to know more information about the issue, so that I could help you better.

  1. what happens when you try to uninstall the software or program?

  2. do you get any error code or error message?

  3 is it limited to this program or with all programs?

  4. that all the troubleshooting steps have been tried?

  If you haven't tried these troubleshooting steps, so let us try the following methods; I'm sure this will help you to solve the problem.

  Method 1:

  Run the fixit in the following Microsoft Fixit article and check if it works.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2:

  Put the computer in a clean boot state and then try to uninstall the software/program and check if the problem persists.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Also use Microsoft Safety Scanner and check if there is no threat of viruses.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Please reply with the status of the issue, so that we can better help you.