I can't connect my desktop PC to my wireless modem router

Similar Questions

• Can I connect my desktop HP TouchSmart 520-1070 PC to my TV?

  Can I connect my desktop HP TouchSmart 520-1070 PC to my TV?

  Here are the specifications of your desktop HP TouchSmart 520-1070 According to the specs, it seems that this model does not support the video output of any kind (DisplayPort, HDMI, DVI, VGA, etc.). Although it has no HDMI port on the right side, this port is strictly an entry for game consoles, and other video devices. To connect an external monitor to the computer takes longer and the use of an adapter USB-to-video, like the eVGA UV + UV39 or among many other video-to-USB adapters on the market.

  Please send Bravo

• I can't connect the mobile phone as GPRS bluetooth modem

  MSI Wind U100 laptop (toshiba bluetooth module is built in)
  MS windows XP Professional SP3
  Toshiba bluetooth stack 6.30.01

  I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

  After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

  I've read about this problem in the user manual, but I am not understand, how to solve a problem.

  PS Sorry for my bad English

  I recommend you take a look at the next document if it has never worked before:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  You can find in the section "how to resources" from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Superior...

  After all, the chip is mainly a modem.

  Wireless is there but not designed as the primary connection.

  Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

  It is the Wireless N standard.

  The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

  The fact that aid.

  The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

• How can I connect my desktop to the internet using my laptop?

  I have a laptop with Windows 7 Home Premium, and it is connected to the internet via WiFi. My desktop (Windows Vista Home Premium) is not a wireless card, and I'm trying to figure out how I can connect the desktop computer to the internet via WiFi to my laptop and a connection cable. I can get two computers to recognize each other, but it won't let me access the internet.

  Hello

  
  You can check out the following link and check if it helps.
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
   
  I hope this helps.

• can I connect HP Officejet 4500a - f for wireless network

  can I connect to my wireless HP Officejet HP 4500 a - f?

  LON

  HP Officejet 4500 desktop computer only provide a direct USB connection to a computer.

  You will find the connectivity section for model G510a contained in the specifications of the product below:

  http://support.HP.com/us-en/document/c01954185

  Shlomi

• Connect to the result of local wireless only router and can not go to the internet

  My fujitsu laptop (Windows Vista) to connect to the router wireless home successfully during a month and suddenly 'local only' and cannot access the internet. force wireless is strong and my other laptop with Window XP connect to the internet successfully with the same router.

  And my laptop can connect to the internet using the wifi system in my school without any problems.

  Please help to restore my laptop to the internet via my wireless router.

  Thank you!

  Geofg,

  I have a similar problem after the most recent update of Windows. My IPv4 network properties manually configured outside the range of the DHCP from my router. This is so that I do not receive IP addresses different natted attributed to my computer.

  After the update of Windows, the IP address of the GATEWAY is cleared after each restart of the operating system.

  If you use the manual IP settings, check to see if this can happen to you.

  HTH!

• If I can do an Airport Extreme mobile network with a modem/router cable xfinity manufactured by Cisco?

  Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?  The modem-router Cisco/Xfinity put into bridge mode?

  Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?

  Yes, if the Airport Extreme will be connected to the Cisco DPC3939 back using wired Ethernet wired, permanent.

  The modem-router Cisco/Xfinity put into bridge mode?

  No. I you have done this, the Cisco/Xfinity device would only act as a simple modem... so it would not be a wireless service to all.

  A note of caution here... the support document you are referencing... Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)... use the examples that are long outdated does not follow with the versions present on a Mac AirPort Utility or iPhone/iPad.

  There are some good general information in the document.

• Connect AirPort Express to lemon (Rogers Rocket) Wireless Modem/Router

  I just got Rogers Wireless internet new modem/router Hitron.  I use modem/router mode.  It's great. Very fast and a lot of range. Covers all 3 floors of my house.

  I want to connect an Apple Terminal to my Hitron router with an ethernet cable and put the Hitron in Bridge mode. I want to continue to use the Hitron router as my main and only router.

  However on another floor, I would use an Apple Airport Express connected to my stereo with a jack 1/8 '' to play my music wirelessly from my iTunes from Apple.

  To do this, I need this Apple Airport Express Terminal to 'find' the Hitron router.  How can I get to find the router Hitron?

  I guess that you have a current version or recent of the AirPort Express with the default settings.

  As long as the AirPort Express is located where it can receive a strong signal of the modem/router...and wireless Hitron the Hitron aircraft provides a wireless signal that uses industry standard wireless settings, the AirPort Express can 'join' the wireless network. Wired Ethernet is not necessary.

  Note that the AirPort Express will not "spread" or "repeat" the signal from the router/modem lemon to provide additional coverage of wireless signal wireless, but it can be used to join the wireless network and provide a signal of airtime for your stereo.

  Simply use a Mac running a current or recent operating system, or an iPhone/iPad and configuration "Wizard" Apple to set up things upward. The wizard will automatically offer the correct configuration to 'join' the wireless network. All you really need to do is to enter a device name that you want to use for the AirPort Express and the password of the wireless network and confirm.

  Start the wizard by clicking on AirPort Express under the title of the new AirPort base station.

  

  On an iPhone or iPad, the screen looks like this:

  

  In the example below, the wizard has detected a network named "2WIRE902" for the AirPort Express join. You will see the name of the wireless network that provides the Hitron modem/router on your screen. Just enter a name of device for the Express, then type the wireless network password, then type it again to verify.

  Click next at the bottom right of the window and the AirPort Express displays a green light for a minute or two and you're done.

  

• Suddenly, I can not connect to printer on home network wireless.

  I have a Pro L7680 Officjet and we have a new installation of cable company in our House. We have 2 laptops and 1 desktop. All three share this printer and we had no problem. Since the installation, 1 laptop connects to the printer. Support cable co. was not able or willing to help, saying: it's not their fault. I get a message that the printer is offline, when other computers have no problem printing.

  On the problem computer, go to control panel > printers and delete all instances of the printer.

  Then, print a network Test Wireless at the front of the printer (network menu).  Note the IP address of the printer.

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• How can I connect my Nighthawk R8000 X 6 wireless (no cable) to another wireless router?

  I'm trying to connect my R8000 Nighthawk X 6 to a different router, I have downstairs, but I need you to connect wireless because I don't have a cable running towards him. I can't find the right options on the admin INTERFACE. Can anyone help?

  You can purchase some powerline connectors and connect the R8000 as Point to access your main router. Better than nothing...

• Can I CONNECT TIME CAPSULE to COMCAST without wireless/WiFi?

  Hello

  ...

  I know I'm out of my League here... But...

  I have a new Mac Pro... and I also connected to a router (modem) comcast wireless... I bought a time capsule from the airport. Are they compatible? Should I have them both?

  There must be several options, but I'm limited inskill!

  Thank you

  Richard

  I have a new Mac Pro... and I also connected to a router (modem) comcast wireless... I bought a time capsule from the airport. Are they compatible? Should I have them both?

  When you say that comcast I presume it is the router modem cable or fiber (DSL)?

  Anyway your TC is compatible...

  You need both... TC has no modem... If you must continue to run the Comcast modem and I would recommend that you do not touch... let it run like it's...

  Connect the WAN port on the TC in the Comcast router LAN port...

  Just to be clear, the answer to your title is no. a very solid no deeply upsetting. You cannot connect TC to Comcast wifi... you need to connect by ethernet... This is the one and only way... and you cannot disconnect the ethernet after connection... it should stay like this...

  If there is a problem, there are solutions... As adapters EOP or a second terminal airport. Tell us if you want this specific info.

  Open the airport on your Mac utility (or use iOS version is often more reliable) and configure the TC... It is almost entirely automatic... but if you are unsure, we can help you...

  You start the installation wizard by clicking on other WiFi devices (1) in the upper left corner.

  

  The installation wizard will cost essentially through the configuration.

  To do Time Machine backup make sure that you connect to the TC wireless not comcast gateway.

  There are other things... start with that and let us know how you go.

• I can't connect to my Internet because my wireless connection does not have an ip address send solutions please

  My os is windows xp professional sp3, this problem occurs with my computer of homebase and a laptop, however, works very well with a second laptop

  operating system windows 7 no probs with ip address or whatever it is help please

  Hi Petertomblin,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Unable to connect to an access point wireless with Wi - Fi Protected Access update installed

  http://support.Microsoft.com/kb/821442

   

  Method 2: If the method above does not help then you can see the article mentioned below and check if the problem persists.

   

  You cannot connect to a wireless network access point that uses authentication shared from a Windows XP-based computer or a Tablet PC Windows XP Tablet PC 2005 Edition

  http://support.Microsoft.com/kb/884787

  Let us know if that helps.

• How can I connect my HP Officejet Pro 8500 Wireless to my ipad to print wireless

  I am trying to connect my ipad to the printer above and it tells me No Airprint Printers Found.  Can someone tell me how to get these two connected items.  Thank you very much

  Use it wireless setting in the iPad to connect to your printer. This will be an ad hoc connection.

  You may not be connected to your wireless router and the printer at the same time so unplug no matter what router you are connect to before you do...

  Once you have done this, you will be able to print documents and emails fror your iPad to your HP Offijet 8500 printer.

  If you want to use ePrint (your printer is capable of printing), follow the instructions in this document from HP web.

  Here is a link to the web portal for your printer support.