I can't connect to the internet service provider said it is due to a recent microsoft update...

Similar Questions

• WRT1900AC not connect to the Internet service provider high speed.

  My WRT1900AC does not connect to internet with the speed, that sending my ISP.  If I connect my modem - modem-cable Linksys DPC3008 - directly to my computer, it connects to 50 Mbs.  If I connect it to my WRT1900AC, it passes through only between 1.9 and 2.5 MB.  It comes through to the back of the router's ethernet port.  Tried to reset to factory - no change.  Disabled IPv6, no change.  Any ideas?

  Prioritization of media:
  Enable the prioritization of media
  Activate the Support WMM
  The maximum value that your ISP provides you with the value Downstream\Bandwidth. # x 1024 = # value to enter the area downstream.
  http://www.Linksys.com/us/support-article?articleNum=138353
  http://www.Linksys.com/us/support-article?articleNum=156271
  Unless required by your ISP IPv6 disable on slot Internet connections

• I recently changed internet service providers and now my Wired desktop can't connect to the internet.

  I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

  Hello

  Follow the steps in the KB article below and see if that fixes the problem.

  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

• I can't connect to the Internet wirelessly

  I just replaced my wireless device and now I can't connect to the Internet wirelessly

  Hi JimMahoney,

  You have installed the necessary drivers for your new wireless device?

  You receive an error message when you try to connect to the internet using your router?

  What virus protection software is installed on your computer?

  I suggest you try the steps mentioned below.

  Method 1: Run the network troubleshooter utility in Windows 7.

  Please follow the steps below mentioned link to run the network troubleshooter utility

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  Method 2: You can also check the configuration of your new wireless device.

  Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device.

  I hope this helps.

• After the removal of a virus, I can't connect to the internet, is looking for an IP address, and the RPC server is unavailable, said

  My netbook has a virus so I did a scan and remove infected files and a program which the virus attached itself to.  Now, I can not connect to the internet.  He is looking for an IP address, and he also says that the RPC server is unavailable.  Any ideas?  Help

  Hello

  Step 1: Start your computer in safe mode, and then try to start the Remote Procedure Call (RPC) services and start the computer in a clean boot
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click Remote Procedure Call services.
  c. change the startup type to automatic, and then click Start.
  d. click ok to apply the changes.

  Reference: http://windows.microsoft.com/en-US/windows7/what-is-safe-mode

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• When I reinstall windows from my dell disk, everything is great and there are no programs. Also, I can't connect to the Internet.

  Good so I bought a Dell Inspiron of the 620 years for the game and I had to reinstall Windows 7 on a drive I ordered from dell. So I reinstalled Windows 7 and now I have a lot of problems. So first of all it seems very strange, the taskbar is not transparent and all the buttons are very weird. Also, there are no programs in the start menu. Secondly, it is said there is no Internet connection available, but I plugged in everything. I can also connect to the Internet on other PCs as my laptop. Any help is necessary, because I really want to return to the game. :)

  Hello

  When you reinstall the operating system, you must obtain the latest drivers for Windows 7 Support of Dell.

  Go to this link for your model, and then select the operating system > and then select the correct chart, drivers etc. :

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-620s

  For network adapter drivers, you can use the computer you are about to post here to go to the link above of Dell > download and save the software drivers for the office > transfer using a Flash drive and install it on the problem machine.

  Then use your game machine to get the rest.

  And here's how to reinstall using a disc from Dell:

  "How manually reinstall Windows 7 on a Dell computer.

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=&l=&s=&docid=266457

  You will need

  • Dell operating system installation disc
  • Dell Resource CD/DVD (also available on the page Dell drivers and downloads )
  • Any software and/or the documentation of your connection to the internet service
  • Any application install disks
  • All install disks for external (such as a printer) and added to your Dell devices after the purchase of internal devices

  See you soon.

• I have the wireless option, but if I use it not I can't connect to the internet.

  I have the wireless option, but if I use it not I can't connect to the internet.

  original title: difficulty borrowed from internet

  If it's the Acer utility, it is best to visit Acer support:

  http://support.Acer.com/us/en/default.aspx

• I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

  I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

  original title: can't get online

  Hello BurnBurn,

  I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  http://support.Microsoft.com/kb/283658

• I can't connect to the internet via my host after uninstalled antivirus software and restart

  I can't connect to the internet via my host after uninstalled antivirus software and restart it.

  I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.

  Hello

  This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.

  Unable to connect to the Internet after uninstalling Norton AntiVirus.

  http://Service1.Symantec.com/support/NAV.nsf/8d071816eedd7cac88256c0e005a96e5/751c3298ab99cf7188256d34006702e2?OpenDocument

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows?

  322756 (http://support.microsoft.com/kb/322756/ )

• I can't connect to the internet on this laptop wireless

  Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• My wireless on my laptop will read the files on my desktop but I can't connect to the internet, my lapto electrician iI unless other computers work well

  My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine

  The following diagnostic information:

  1. Connect your laptop wireless so that you can "read the files on your desktop."
  2. Open a command prompt window (start > run > cmd > OK)
  3. Type the following command in the black command prompt window and press enter

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".

  4. Let the window open orders and "hard wire" your laptop to connect to Internet
  5. Type the following commands in the black command prompt window and press ENTER after each one

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".
     Notepad '% userprofile%\Desktop\testdata.txt '.

  6. Copy and paste the contents of the testdata.txt file into your answer here

  Please note that there are 2 for the second command ipconfig > characters.

  You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window.

• I have a WAN Miniport PPPOE problem. Can't connect to the internet.

  I have a WAN Miniport PPPOE problem. Can't connect to the internet.

  Hello

  If you have a Modem and a wireless router or a Modem/Router combination. Read its manual and configure the WAN for PPPOE port.

  http://www.ezlan.NET/PPPoE.html

• I can't connect to the internet after the elimination of the virus and new restore point.

  I use IE8. I can only connect to the internet in safe mode with network.  What can I do to connect to the internet in the normal windows?

  Hello

  When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files  When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.

  If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int ip reset press enter

  ipconfig/flushdns, press enter

  Restart your computer.

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky