I can't get my computer to read the DVD.

Similar Questions

• I just put in a new hard drive in my computer and now my sd card reader slot does not work. How can I get my computer to read the SD card?

  Computer crashed

  New hard drive in my HP laptop

  Computer is not reading my SD card

  Hello

  Make sure the SD card works on other computers.

  The card reader is a USB device to ensure that other USB devices work.

  Check with HP, their drivers support and documentation online and ask in the forums of HP where it
  others will be with the same or similar model. I hope this is just the driver. It is possible that the device has been
  back not connected properly or even damaged when installing the new hard drive.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I get my computer to read pdf files?

  My computer has stopped to read Adobe pdf files. I get a box of Conversion of Microsoft Word files that asks if I want to use default Windows, MS DOS or other encoding to read the file, but nothing works. I uninstalled and reinstalled Adobe Reader X on my PC Dell/Windows Vista, but that did not help.

  You start Reader and click file > open to select the file you want to open...

• I bought a new Microsoft bluetooth mouse. I can't get my computer to open the order of blue tooth of his running. There is no CD or usb plug. IM totally lost on the installation procedure.

  I went by the commands activate bluetooth on my desktop, laptop and the system stalls before it comes to activate or disable the command.

  Hi Comp-pro,

  You can read the following article and try the steps to activate Bluetooth Support services, and then try to turn on blue tooth devices.

  Connect a Bluetooth device that are neither require a TRANSCEIVER

  http://support.Microsoft.com/kb/952818

  You can also visit the following links:

  Try the fixit for common issues of material mentioned in the link below and check if it helps.

  http://support.Microsoft.com/GP/hardware_device_problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't get Premiere Pro to read the timecode of ProRes files

  I have a pix240i that I use to record the Pro Res files to.  When I import the ProRes files in first, the timecode for each clip begins to 00:00:00:00, instead of display timecode camera recorded, even though I have "Use Media Source" selected in the preferences.  If I take the same clips in Quicktime or Final Cut Pro, they read the appropriate timecode.  It is a big deal, I need to be resolved.  All the solutions or is this a Bug Pro first.  I did some research and found that some people had this problem last year, but I've never seen a resolution.

  Greg Jones

  D7, Inc.

  Hi Greg,.

  I have the following problem registered:

  • PrPro is not read/display TC correctly from PIX recorder captured ProRes files

  It is supposed to be fixed in first Pro CC 2015.0 (9.0). So, if you're still on 8.2 or earlier version, you can upgrade to the current version. If you are on 9.0 or later, please file a bug report. Also, let me know if you do, and I will try to reopen the previous bug, as well.

  Thank you

  Kevin

• why I can't get my computer works on the normall startup mode

  When I restart the computer and click to throw the normall mode it stays on the safe mode!

  Hello

  1. What is the operating system installed on your computer?
  2. don't you make changes to the computer before the show?

  Please follow the steps mentioned below.

  a. click the Start button.
  (b) in the search box, type msconfig and press to enter.
  c. Select the Startup tab.
  d. under Startup options, turn off safe mode
  e. click OK and apply.

  Restart the computer and verify if you can boot normally.

• How can I get 13 items to read the RAW of Nikon D750 files?

  I move my camera since Nikon D3200 to Nikon D750. With the D3200 I used 11 items to edit JPEG and RAW files, but discovered today that 11 elements is not compatible with the D750 to read RAW files. I downloaded the trial version of 13 items - which is compatible with the Adobe help desk, but taken with the D750 RAW files aren't always be seen. However, I don't see the RAW files that I took with the D3200.

  Same card memory is used and I formatted the card when I changed from one camera to another.

  What I am doing wrong? I almost always shoot RAW, so I need to be able to the files.

  I wonder if the 13 elements is really compatible with the D750.

  I want to add that I use a Mac.

  Thank you!

  Shannon

  Just use help > updates in the element editor 13 photoshop to get camera raw 8.7, so you don't have to use the DNG converter and then you will be able to open the nikon D750 directly in 13 EPS files.

• "A plugin is required to view this content", how can I get my computer to do this?

  I am trying to open a video file for my online class. When I click on the file, a gray box appears and reads "a plugin is required to view this content. How can I get my computer to open the video. I have a MAC and zero knows how to solve problems in this regard.

  You have Flash and QuickTime. You may need to install Flip4Mac if need to other media to be played.

  • https://support.Mozilla.org/KB/play-Windows-Media-files-in-Firefox
  • Flip4Mac: http://dynamic.telestream.net/downloads/download-flip4macwmv.htm

• How can I get my computer to open Adobe Reader Standard?

  How can I get my computer to open Adobe Reader Standard?

  You can't have two of those installed. You must remove one of them and the one who is left to repair.

• My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read.

  My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read suggestions?
  original title: Windows Audio recording

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) did you of recent changes to the computer before the show?

  (3) what is the file format of the files you are trying to play?

  (4) you get an error message?

  (5) you are able to hear the sound of Windows and other applications?

  (6) that Microsoft Fixit ran?

  You can try the following methods and check if it helps.

   

  Method 1: No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  Method 2: Problems running Windows Media Player

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 3: Solving problems run Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

• Computer to read DVD - one message says that I can not read the DVD, except that I have installed a new driver.

  I have a new Toshiba C650 laptop, and he says that I can not read the dvd on it except that I have installed a new driver. Is this true?

  Hi Bill,

  To be honest, this sounds ridiculous but if you get a message, I suppose it could be possible even if I find it incredible.  Do you have it in a (local or online) retail store or Toshiba?  By any chance did you upgrade from the DVD player when buying (where they may have accidentally neglected to update the drivers of the drive that was originally installed)?

  As it is new, Toshiba should help you with this.  Here's the contact page: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=su_contact&pf=true.  Give them everything they need to prove that buy you it and it should be under warranty and then give them the message Word for Word, that you have found.  They should be able to help you.  They can, for some reason I don't know, you don't need to help or guide you through a new driver installation.  I ask for a clear explanation of why this is necessary on a new computer and, if you are not satisfied with the response, ask them to consider that all the faulty computer and replace it.  Even if they won't, he needs the get them less motivated to solve your problem.

  I hope this helps.

  Good luck!

• I can't get my computer to restore as soon as possible.

  Original title : I can't get my computer to restore as soon as possible. I don't know what I hit, but the system is bad programs just work to help stop it please

  Could someone please help me I can't return my computer to an earlier time, that it will not start. All the icons on my computer then display windows Explorer instead of their own and programs are turned off as I use them. I went only in my downloads file clicked on properties don't know what I hit, but any help or advice at this time would be good before I destroy. Thank you

    

  Hi KerryEllis,

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505
  
  Method 2
  I suggest to start the computer in safe mode and then try to run the system restore.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• I can't get my computer to make appear the email in outlook express after I entered my username and password

  on this site - https://www.brickbodies.com/Citrix/AccessPlatform/auth/login.aspx

  I can't get my computer to bring up my email in outlook express after I entered my username and password on this site - https://www.brickbodies.com/Citrix/AccessPlatform/auth/login.aspx

  I have successfully downloaded client software (launch.ica file). I have a XP system. Help!

  Hi RodneyMcClinton,

  ·         What happens when you try to access outlook express?

  ·         You get the error message?

  ·         Were you able to access emails using outlook express?

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  http://support.Microsoft.com/kb/813514

  Reply back with the results.

• now, I can't get my computer up I think there virus...

  now, I can't get my computer up, according to me, I have a virus... I have a notebook... it tells me to reinstall a copy of the file, l.dll... root\system32\ha windows i can't open my computer this is what keeps poping have cd can b used... once more laptop... it is only a 11 inches and no access to the CD... so know u help me.. pls

  What kind of laptop is (make and model).

  If it supports booting from a USB key, you can make a bootable flash drive that starts the recovery XP (no XP media required) Console.

  Surely someone can help you with that (how about it system engineers)?

  There is probably nothing wrong with your hal.dll file - XP only can not find.

  Unfortunately, even the 'new' Microsoft Answers forum does not have any kind of information system when a new question is asked, so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  If the system works, what do you think might have changed since the last time it did not work properly?

  P. S.

  You are unlikely to simply replace the hal.dll by copying a file hal.dll from another system, and here's why:

  When XP is installed, it selects and develops the hal.dll appropriate among seven possibilities of compressed on the CD of installation files:

  HAL. DL_
  HALAACPI. DL_
  HALACPI. DL_
  HALAPIC. DL_
  HALMACPI. DL_
  HALMPS. DL_
  HALSP. DL_
   
  Everyone who can be developed in a hal.dll file, so if it is your intention to replace your hal.dll, you should have to understand or know in advance which is the right one for your hardware, motherboard and processor.  If you just picked one at random, you would have a chance of one in seven (14%) to get the right pair.  You will get maybe lucky.

  Most people would simply choose the file hal.dl_ to expand, but it's the simplest, most boring, generic, and less likely to be correct of all the choices.  It might "work" but it will work hard on something very old material of the system or a virtual machine.

  The file hal.dl_ on the CD is the most boring of all:

  HAL. DL_

  * Standard PC

  It's a good choice for some virtual machines (such as VMWare), but a very poor choice for most systems.

  If I wanted to replace the file hal.dll in the same system here, I would need to expand this file:

  HALMACPI. DL_

  * Standard PC
  * Advanced Configuration and Power Interface (ACPI) PC
  * Multiprocessor ACPI
  * MPS multiprocessor

  If I wanted to replace the file hal.dll on an older system here, I would need to expand this file:

  HALAACPI. DL_

  * Standard PC
  * Advanced Configuration and Power Interface (ACPI) PC
  * ACPI Uniprocessor
  * Multiprocessor ACPI

  If you thought you needed to replace your hal.dll because your system was complaining that the hal.dll file is missing or damaged, the message is misleading, and the real problem is usually the boot.ini file and has nothing to do with the hal.dll file.

  It is also why when people trying to help you give instructions to put in your XP CD and unzip the hal.dl_ file to replace yours, it's usually bad well-meaning advice from a novice.  It is less likely to be the right choice.

  You may be able to copy one from a system with a very similar hardware and the things you can do, but chances are that you will not solve the no boot scenario.  I've never seen a corrupted hal.dll.  Seen the message, not the problem...

  That kind of help is generally going to be very bad - although it sort of logic in a first time and is 'logic', but it will never work favorably and it is usually not the problem anyway.

  I fixed the problem "missing or corrupt hal.dll" several times, but I've never needed to replace a hal.dll file doing - which is never really the problem.