I can't get my Satellite A200 began

Similar Questions

• How can I get my Satellite Pro A300-193 of hibernation?

  How can I get my Satellite Pro A300-193 with Windows XP SP3 from hibernation? (Get out the battery seems a little over the top)

  TIA

  EPX

  How about pressing the power button a bit more?

• Don't know how to get down Satellite A200-1MD to WXP

  I bought the Satellite A200-1MD 3 months ago and I want to downgrade Windows Vista to Windows XP, I have not yet tried, but I need help with the downgrade, can anyone help?...

  Thanks in advance.

  Hello

  Don t you need a lot. Download the drivers for your machine by clicking [HERE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] choose your machine (model number is PSAE0E) and registration of all the drivers available on your machine. Then I suggest you to burn all the drivers on a CD to get to your hands after installation.

  It could happen that your hard drive is not recognized during installation. It comes from the lack of drivers SATA (Serial ATA) on the Windows XP CD. This can be solved trough the "F6Floppy" or 'slipstreamed Windows XP CD' solutions. Sorry I would now not explain the WHOLE process how do this because this problem/issue was discussed, about 1,000,000 times here in the forum.
  I guess you already saw the text box 'Research Forum tips' above. Take these words I gave you above (F6Floppy + CD XP Slipstream) and type here or in google.com.
  You will find many useful documents.

  Otherwise there is no special thing, you need to take care off. (Plus I Don t know what I could tell you about your installation of XP on your beautiful machine path ;)))

  That's all, good luck and good weekend...

• Can I get my satellite Pro 2100 high-speed USB 2.0?

  I have a new MP3 Jukebox that can operate at USB 2.0. Do anything to get my Satellite Pro 2100 to work at speed 2.0 that it currently only works with USB 1.1? Sorry, but I'm not very technical.
  Hope someone can advise me
  See you soon
  Bob

  Hi Bob

  The best solution for you is to buy a PCMCIA USB 2.0 card. As far as I know there are cards with two or four USB ports. This card is not expensive and the installation is not complicated.

• Can I get my Satellite L40 repaired without warranty

  Is - it there anyway that I can get my Satellite L40 repaired now the warranty is exhausted?
  I looked at the Services guarantee customer Toshiba but £159,85 it's more that I have can we afford right now.

  Hello

  Well, the fact is that you will pay for the repair if the guarantee is no longer valid.
  So now the question is; What role could malfunction if your motherboard is faulty then the remedy would be a costly affair because the motherboard is one of the portable computer expensive parties.

  You can also contact some laptop technicians in your city, but most often the original Toshiba parts are needed and must be ordered directly from Toshiba.

  Therefore, in my view the authorized service partner would be the best solution

• Can I move the Satellite A200 - 1 m 8 if it is on?

  HII...

  I have Toshiba Satellite A200 - 1 m 8.

  I want to ask you: is it sustainable to movements... as if I move my laptop from one place to another while it is turned on, damaging the HARD drive and the laptop itself?

  Thank you.

  Of course you can move. Just be gentle and make sure that nothing happens. It will be very bad if your laptop falls to the ground.
  I move permanently from the lounge on the terrace. No problem at all.
  One last thing: If you want to move to another place he mode standby (FN + F3), close the lid, and then go to the other room or wherever you want.

• Where can I get a Satellite A40-201

  I have a portable satellite a40-201
  but its screen is broken... where can I get a
  and what is compatible with screens.

  Hello Sosa

  Good question, but you will be very happy if someone can give you a precise answer.
  I just found that you need to display with the number LP150X06.

  Google a bit. You will find enough information. By the way: I really don t think that the Exchange on your own is a good idea.

  Good luck!

• I can't get my Satellite L70C - 13 c, connected to the internet.

  I can not connect to Internet on my Toshiba brand new. There are three likely causes:
  (1) on my BT Home hub (modem-router) settings are wrong.
  (2) on my Toshiba drivers must be updated, in particular the VPN software supported.
  (3) it is a matter of Microsoft.

  Experts from the BT forum give me advice here:
  httpsXXX://community.bt.com/t5/Connected-Devices-Other/I-can-t-get-my-new-laptop-connected-to-the-internet/m-p/1549571/highlight/false#M115708
  and I am trying to establish if the address IP etc I need relate to BT

  Experts of the forum Microsoft give me advice here:
  httpXXX://answers.microsoft.com/en-us/windows/forum/windows_10-networking/no-access-to-the-internet-on-a-new-win10-laptop/621c11b9-75df-4e3d-bd55-27fff2421c17

  Their methods 1 and 2 did not work. I'm not willing to change the registry - I am not convinced.

  So the problem I have unsupported software VPN? In this case, or if there are other updates of driver I need, how can I get them if I can't access the internet?

  Another problem is that I tried to load it on my new PC (the objects referred to in the forums) from a memory stick, after using my old PC to save them. My new PC has a Home365 month free trial but it is based on a cloud then is of no use. I bought subscription a year from Office365 but need internet to install it. I can't find my new Toshiba's desktop already installed any software on it.
  Where can I get out of here, please? My Toshiba drivers and software are up to date?

  PS I had problems this announcement - in which case it's because of my links, I inserted the XXXs

  My son-in-law came yesterday. I'm sorry if I'm about to use the technological terms wrong, but the new laptop does not connect to the IPhone (or vice versa), but connects to my modem/router. Also, my Toshiba connects to the internet via an ethernet cable.

  He concludes that there is a software problem with the Toshiba wireless adapter.

  I've decided that I want more stress and wasted hours over this so I'm about to go back to retailers (again) and require that they sort or replace my laptop.

  I will update this when it is finally settled in case it helps others with a similar problem.

• How much RAM can I add to Satellite A200 PSAE6? (it was 1 GB)

  Appreciate the good advice from experienced people.

  Post edited by: edw

  Hello!

  The Satellite A200 supports up to 4 GB.
  Type: DDR II 533/667 MHz SO-DIMM

  Good bye

• Can not get my Satellite Pro L10

  I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

  Hi James,

  Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

  Kind regards

• How can I get a satellite A110-233 to recognize the NIC under Linux?

  Hello

  I just bought a satellite A110-233. I have partitioned the hard drive, so I have XP and Fedora Core 5 (FC5).
  XP works fine when I plug in the network cable, but FC5 (or at least the Linux kernel) doesn't seem to be able to find and activate the network card.

  The message I get is "8139too device eth0 does not seem to be present, delaying initialization. The 8139too module is in memory as the mii (which points to him).

  Somehow, I need to get Linux to detect that the card is there, but I don't know how to do this. Can anyone help?

  Thank you.

  Hello

  As far as I know the laptop has a built-in Realtek network I / F chip RL8100CL.
  I think you should googol around LAN compatible driver for Linux that supports this chip.
  Unfortunately, Toshiba page you will find not all drivers for any Linux distribution because Toshiba doesn't support this operating system. ;(

• Re: After getting my Satellite A200 Vista request username and password

  Hello

  IM in the hope of a quick help to my problem...

  I just got back my A200-ML1 with the recovery CD.
  But when she want to open family vista premium, he asks a password and a user name. I'm all of those, because I just did format the hard drive?

  Can someone help me with this problem. I have read the manual and couldn't find anything on a password.

  Thank you

  May
  DK

  Hello

  It seems strange that you are asked to enter the password. I suggest you find a software like Windows.Key.Enterprise.v9.3.Build.815.Bootable.CD or Ophcrack LiveCD and try to crack the password.

  Lets see what other users can suggest

• How can I recover my Satellite A200-AH3 whitout CD?

  Hi, I bought a satellite AH3 but I have some problems because when I got it, it was the last in the store, which means that they used the computer a bit and there are some settings that I can change so I would like to recover the computer without CD, I already know that there's a partition where the recovery is.

  So I would like to know how to reinstall vista with the factory settings.

  Thank you

  You cannot retrieve laptop without recovery CD. Only you can do is make the clean OS installation using the Microsoft CD/DVD facilities. After having done that, you can download and install all available drivers, tools and utilities.

  If you got the original recovery with this mobile media use it for installing the OS. If you need more help how to do this please write again.

• I can't get my Satellite A660 - 11M

  I have a Toshiba Satellite A660 - 11M.

  I want to wipe it to factory settings. I tried to do this using a disc I made when I got the laptop. However, when I use this, I access the menu screen is but do not have the HDDRecovery option at the bottom. I tried to make a new disc using Toshiba HDD Recoery but he says he has «no area HARD drive recovery»

  I have a feeling that the problem is that my score HDDRECOVERY was damaged. How can it be solved?

  A few weeks ago a program I used wrote the disk D: (HDDRECOVERY). I didn't want him, but it was a program stupid lol. Has it caused irreparable damage?

  I really need to wipe it quickly, can you help me please fix it?

  Hello

  This missing option occurs if you want to install the recovery image using installation of HARD drive and it has nothing to do with the use of recovery disks.
  When you use recovery discs, you will see another menu on the screen.

  I put t know what have you done in the past, but obviously recovery image stored on your laptop is not used or damaged. So only option is installation with recovery DVDs.

  How al it works you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  If you have any other questions you are welcome.

• How can I get my Satellite Pro A100 product recovery media?

  When I bought my A100, I didn't any of the product recovery media. I assumed it would be pre - installed on a partition of my hard drive. Seems not to be the case.

  I want to resize my main partition to allow me to install linux on the space that would be made available. While Linux will do for me, just in case there is an error, I need a copy of the product for XP and other software pre-installed recovery media. Direct contacts on the Toshiba site are difficult to locate.

  So I was wondering if anyone can point me in the right direction? I am a UK user.

  Hello

  If the recovery disk was not supplied with the laptop, then you should be able to create a recovery disk using the preinstalled tool called Toshiba Recovery Disk Creator.
  I think that you didn t read the user manual after you have received the laptop

  Anyway usually the recovery disc can be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  But not all the recovery discs would be available, especially if the laptop series was abandoned this means that you can not order a recovery disc if the laptop series is too old you can also try to contact a local ASP (partner) in your country for assistance and could try to order this disc it.

  Otherwise, you must use an original disc of MS Windows all drivers can be downloaded from the page of European driver of Toshiba.