I can't have external floppy drive to work error "diskette must be formatted before use"

Similar Questions

• I can start my F30 since an external floppy drive?

  I use Norton Ghost to clone a copy of my hard drive on my PC for disaster recovery and requires a m/c boot hard disk when I use Ghost. I want to do the same thing on my F30 but have no idea if I can configure the F30 to boot from an external floppy drive. If possible can someone please tell me how to change the boot sequence, as I have not any experience based laptops. Thank you very much.

  Hello

  I use Norton Ghost 2003, and I am very satisfied. It works under windows and you can create the image file on the second partition or even create DVDs of recovery immediately without using floppy. I can recommend it just for you.

  Back to your question: with your Qosmio model, you can use the floppy with follow-up part number PA3109U-3FDD drive. If I remember correctly, you can press the U button just after switching on the unit and the unit should start using floppy drive as first boot device.

• Can't get my floppy drive to save a disk error: disk is not rewritable.

  Original title: FLOPPY ERROR.

  I can't get my floppy drive to save on a disk, I get the error message saying disc one is not rewritable. I use it for embroidery

  how you're framing your question and the answer

  is a little hard to follow.

  is this correct: you have a machine that you insert a floppy disk in

  that you set up with data on a computer.

  the machine cannot write to the diskette or the computer cannot write

  on the floppy?

  or what?

• Can not get my portable floppy drive to work on my computer

  Original title: I have a portable floppy drive that works on all computers but mine! It indicates that the device is installed and ready to use, but when I put in a disc, nothing happens. What can I do?

  It was in the shop and they said it worked fine in my computer to the shop. But at home, nothing. I tried on my old Mac and it works, too, but not on my PC.

  Hi Barrydraw1,

  ·         What operating system is installed on your computer?

  ·         What is the brand and model of the computer?

  ·         The floppy drive is not detected by the computer?

  ·         Have you tried to insert a different floppy disk and check?

  If the drift of floppy is not getting recognized by the computer, and then run the Fixit and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  If your computer does not support floppy drive so it will not work.

  I hope this helps.

• How to combine several libraries in a library complete?  And this new global all0 library can be an external hard drive?

  How to combine several libraries in a library complete?  And this new global all0 library can be an external hard drive?

  1. click here for more information.

  2. Yes, if this disk contains a partition image or the drive Mac OS Extended format.

  (142356)

• How can I get my external cd drive to work on my hp ultrabook

  How can I get my external cd drive to work on my hp ultrabook

  Hello:

  In addition to the above, you will need to also go into the BIOS and turn on legacy Mode in order to boot from another device, but the hard drive with Windows 8.

  You may also need to disable secure both boot.

• Can I have two HARD drives in my d7-1448 of the Pavilion notebook?

  Can I have two HARD drives in my d7-1448 of the Pavilion notebook?

  How do you know that one to replace or should I replace both?

  Hi, Bill:

  I like this one... (and so do a lot of other people if you read the comments).

  http://www.Newegg.com/product/product.aspx?item=N82E16822136280

  Paul

• Cannot get the floppy drive to work.

  Well, maybe noone here will want to address this issue, but I really need an answer that I use the files mentioned below in my profession. Any help would be appreciated. And if I posted this in the wrong place, sorry, this is the first time I used these forums and didn't really know where to post. 

  OK, I know this floppy are are outdated, but I have a bunch of files that I created years ago when the diskette was everything you had.

  I had a disk in my computer that I was using and one day I tried to open some files in the floppy drive and it says that the disk has not been formatted and I wanted to format the IDE drive.

  I got a new floppy disk and it says the same thing. I tried to format it and received a message that said Windows cannot format the drive.

  So, I thought that maybe the old IDE floppy drive had gone belly up. I ordered a new floppy USB of TigerDirect drive and installed. It does the same thing.

  Can someone help me get this floppy drive so that I can access work files.

  I have a HP Compaq dc7600 form small computer running XP Pro SP 3. The floppy drive I ordered is an external USB floppy drive PowerUp G54-8016.

  I have a Zip USB drive and it works.

  Any help would be appreciated.

  I don't know why the IDE floppy drive was working and then quit, and now the new floppy drive will not work.

  Hi kemperhills,

  ·          Is it possible to check if the floppies are still good?

  ·          The diskette was made read-only?

  According to this Microsoft article this could happen because the disks are bad:

  http://support.Microsoft.com/kb/140060

  Was there a kind of switch on it? If so have them try to change the switch and try again.

  http://support.Microsoft.com/kb/309623

• When I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening

  Original title: Ox8000700020

  Hi, when I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening

  Double post: http://answers.microsoft.com/en-us/windows/forum/windows_other-performance/ox8000700020/3c708968-5d37-40dc-97ef-2a44b72ca5fc

  I have merged the new post with the original question.

  -steve

• reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again.

  reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again. the deleted copy is missing in the trash folder too.

  Unplug your backup disk, restart, and try again.

• Boot Camp: This disc seems to have been divided by another utility. It must be erased before installing Windows.

  I have a SATA Western Digital to 6 TB drive on my Mac Pro 2012.  I thought "what better place to put a bootcamp partition?  But when I went to use the Boot Camp Assistant, I was greeted with this:

  Boot Camp: This disc seems to have been divided by another utility. It must be erased before installing Windows.

  

  I thought ' OK - I'll delete data... Use utility disk to erase the disk completely, and then try again.  After a few hours, I used... completely partitioned disk utility disk and tried again.

  Same message.

  It seems that for some reason I can erase completely and use the entire disk for Windows (blah) or should I use another drive or not Boot Camp at all.  Is there a problem with the size of the hard drive Boot Camp can support?  Any advice?

  Hello ElPapa,

  Thank you for using communities of Apple Support.

  I understand that you want to put a Boot Camp partition on your Western Digital HD connected to your Mac Pro. What is your boot drive? If this isn't the case, it could be part of your problem. According to the following article on installing Microsoft Windows using Boot Camp, it is said that you need "at least 55 GB of free disk space on your startup disk".

  How to install Windows using Boot Camp

  If you install it on your boot drive and still get this message, take a look at this article: Boot Camp: alert message Partition when you use Boot Camp Assistant

  Best regards.

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• Install XP Home on a SATA I can't load the drivers to F6, because I don't have a floppy drive equipped

  In order to launch a car diagnostic kit that is known to unstable on versions of windows more later than XP I completely reformatted the SATA disk on a laptop 5 year running Win7 Home old.  I tried to load drivers SATA to F6 during installation, but without a floppy drive, I can't do that. He appears to be very complex to format a memory stick to emulate a floppy disk and have yet to do that.

  Any help would be appreciated!

  Thank you in advance.

  You can integrate drivers (and service packs) in a new installation CD with nlite...

  http://www.nliteos.com/

  Or otherwise, enter the BIOS and change the type of access AHCI/RAID IDE disk / ATA.

  Tricky

• I am running XP and now I can't re - install after installing Windows8, I I get messsage that floppy drive could not be found, but I don't have a floppy drive.

  I want my XP back

  I am running XP and now I can't re - install after installing Windows8, I get I messsage that floppy drive could not be found, but I don't have a floppy and player despite the choice of boot from my cd rom and by disabling the floppy drive the same message at startup When I scan for my cd rom he sees them, but say that they do not function correctly, any ideas what is happening? They were fine before, my BIOS did not change to recognize my cd rom?

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• I can't get my new WD external hard drive to work with Time Machine.

  My Seagate 1 TB external hard drive, connected to my Airport Extreme, use the USB port, was completed (it stores up to 3 1 iMac and MBP), so I bought a Western Digital 2 TB hard drive to replace it. I formatted correctly, connected to my MBP, then connected to the Airport Extreme. When I opened the time Machine, it didn't appear. By selecting "Set up the new TimeCapsule" open Airport utility. By clicking on the router button gave me change. By clicking on the "Record" button showed my new hard drive. The "setup" button is grayed out, unless I unchecked and double-checked all of the options. He warned me that I would be offline for a while, but it did nothing; My wife MBP and MBP my son not a never lose their connection to the internet, and I lose mine, either.

  My Mac guy, who never met a problem he couldn't fix it, is puzzled. So I am. We tried all the usual ideas, restart my MBP, restart the Airport Extreme, reformat the external hard drive, with different numbers of partitions (and Yes, I chose the GUID), but we can not simply Time Machine to connect with the hard drive. It is a Western Digital My Passport Ultra. This external hard drive is not compatible with Time Machine?

  What version is your AE? Backup is supported only on the sector of Tower model.

  You are self feeding Ultra Passport? It really must be external powered... or plugged into a powered hub.

  My passport readers have been consistent in the past... but sometimes strange things... That is, they can change the USB chip without warning, resulting in questions. The USB hub can help.

  There is also something... Plug the USB key into one of your computers and start backup TM on this... proceed very long... but we need to start... Cancel backup... and then plug it into AE and see what happens.