I can't navigate and select with the mouse in some ID dialog boxes

Similar Questions

• What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  cwalker,

  If it does not, it may be time for the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• I can't move a layer with the mouse.

  I can't move a layer with the mouse. Only using the arrow. This happened two days ago and could not get the right set of return I guess. Until I'm able to move a layer with the mouse and arrow keys. When you move the layer with the mouse you he almost jumps back to the original space. I'm only using a bluetooth mouse, wired keyboard with a macbook from apple.

  Photoshop Elements does not respond when you use Mac OS X 10.10 editing tools

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge

• Can scroll is no longer with the mouse since FF48 on Android. Ff48 mark now instead of scrolling text

  Subject says it all.

  I have two boxes of Android MyGica running FF48 one with Android 4.4.2 and the other is 5.0. Never had any problems with FF until V48.

  Now, I can't scroll with the mouse or keyboard.

  A temporary solution for me was to downgrade to v47.0 using titanium backup...

• Automatically select a TextInput box, so the user must first select with the mouse

  Hi guys,.

  Is it possible to automatically set the cursor to an area of TextInput in Flex 3? So that users can start writing without selecting the TextInputBox with the mouse?

  Like Google does on its homepage!

  Thank you

  K

  Just use setFocus().

  Example:

  myTextArea.setFocus ();

  Simply call this initialization program.

• How can I remove the gaps when pasting and select with the magic wand?

  Anti-aliasing is turned off however, there are gaps. How can I stop this? This problem occurred recently, as a few days ago, I've been able to copy and paste without gaps.

  I select a part of the image then copy and paste into a new layer in the same position, then I select the inverse of the image newly pasted the selection back to previous and Coptic image, the other party, and paste it into a new layer.

  The gap is between the tank and the plants (see image)

  

  Sometimes, these lines appear if you are not 100% like c.pfaffenbichler said, it can also be the way that your graphics card is reading the info, as often, when you flatten layers, the line will disappear. One thing you can do is to develop the selection of 1 px on the layer which will be the bottom. This will give you a bit of overlap.

• How to combine real-time video with LabVIEW indicators so that the video can be displayed and saved with the overlay data

  Let's assume for the moment that I can find a device for which LabVIEW has the appropriate drivers.  Is it possible to combine the camera feed with digital indicator fields so that there is a video out showing the data superimposed on the live image?

  I'm talking about something like a screen of the camera where you see the camera settings are displayed on the image in the viewfinder.  Note I have one isn't about analysis of video data or somehow reading parameters of the camera to the camera.  Data would be temperatures, pressures, speeds, etc., acquired by different instruments at the same time the video is captured and processed somehow by LabVIEW.

  No problem Wildcatherder, don't let me give you an overview of the process.

  When you get a video acquisition method entry, it will be an image format. Essentially, it's a bunch of images that are updated at the speed of video capture, just like the material. There are screws express (wizard - like elements) that simplify the obtaining of images from your video source. With the drivers and measurement and Automation Explorer installed, you should be able to get at least the image.

  If you have IMAQ toolkit, I mentioned, you could just wire the reference image (a purple wire wavy) and a text input (say, a temperature that is converted to a string) in the text overlay VI and it would produce the desired effect. Without this, you will need to convert the Image into image (these are two different data types in LabVIEW) and use the image instead, editing tools (essentially replacing pixels in 2D image data). You would then update an indicator of the photo with your photo altered, if all goes well to the pace of the acquisition hardware. As I said this is less elegant and can take a certain amount of time processor. If you view these images at all and are just their routing, it should be slightly faster.

  I don't know about video production equipment, I mainly used entry Firewire or USB, the computer screen or the file data. However, if the driver exists, it should be possible, but a quick review of the functions doesn't seem to come with output functions. Cannot advise on hardware, but you can start with:http://sine.ni.com/np/app/main/p/bot/no/ap/vision/lang/en/pg/2/sn/n17:vision, n21:11600 /?

  Kind regards

  Mello

• I am trying to set up my computer, so I can send emails and letters with the Microsoft speech recognition

  Salvation in Ottawa Canada.  I am using the above in my laptop.  I was given Microsoft LifeChat LX-3000 running Micro cover and the disc that comes with it.  Disk would not properly charge during installation.  I went to the Microsoft website and tried to download this product, and I got the same results.  Sometimes I plug my head game, and it works for a long time.

  
  I am trying to set up my computer, so I can send emails, write letters nothing complicated.  I use speech RECOGNITION Microsoft,.
  instructions.  My first questions.  Do you actually have a program, in order to activate speech recognition?
  
  I'd appreciate any help, advice, etc.
  
  I approach the age where, I rely on my computer help at times and I really like the lap top.
  
  Bryan W. Fuller
  * original title - Microsoft Speech recognition - 9 windows - Vista home premium *.

  Hi Bryan,.

   
  You can use your voice to control your computer. You can say commands that the computer responds to, and you can dictate text to your computer. Before you start using Windows speech recognition, you must have a microphone attached to your computer.
   
  I suggest you to see the links and check if it helps.
  
   
  Set up speech recognition
   
  Common commands in speech recognition
   
  Setting speech options
   
  Train your computer to recognize your speech
   
  Use speech recognition to operate windows and programs
   
  Dictate text using speech recognition

• Drag and scroll with the mouse at the edge of adobe

  I have a big scene 2500 x 2500 and I want to use the mouse to drag and scroll left and right up and down.

  want to use the click and drag and scroll

  I can do with adobe edge

  Thank you

  Dropbox - movable

  Note: If you want the movement to be more fluid (add inertia or speed to drag) as in the example you gave. You can add thowProps of Greensock code, but you must have a subscription to access.

  GreenSock | ThrowPropsPlugin

• Photoshop CC 2014 - cannot scrolling up and down with the mouse wheel in the actions palette.

  Hello!

  I recently updated to the 2014 Photoshop version and I noticed that I am more able to scroll with my mouse wheel in the actions palette. However, I am still capable of when the mode key or the history tab are enabled.

  I'm not sure if I changed a preference and it messed up inadvertently on myself.

  Any help would be appreciated

  I can confirm the same thing on Windows 8.1.  Heck, I use my wheel mouse for this too, though less that I increased my number of pixels vertical office with adding new hardware monitor.  I just tested in Photoshop CC 14.x, and it scrolls.

  I'll make sure that adobe is informed.

  -Christmas

• Cannot copy and paste with the mouse

  I use VM Player 2.5.2 on MS Windows XP, my comment system is Centos 5.2.

  For some reason I can't use the mouse to copy and paste.

  Any ideas?

  TIA,

  Vitaly

  Hello

  Html in your xorg.conf file breaks are weird

      Subsection "Display"
          Depth       8
          Modes       "1024x768"
          ViewPort    0 0
      EndSubsection<br><br><br>
  

  I also note that there are no entries in there for a mouse that either.

  Attached is my xorg.conf centOS file, make a backup of the file you are using now and try this one instead.

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki

  Edit: of course, the forum software translated html breaks... hmm

• GREP with the Javascript vs find/replace dialog box

  InDesign CS4

  Search/replace, GREP tab dialog box

  To find:

  (www: http\:-/-/) ([\w\-\?\=\&]+[\.\/]?) +

  This expression finds links pretty well.

  When I put in a .jsx file and fire in the actions palette, it does not work.

  The following works, but obviously does not correspond to as many hypertext links:

  http\:\/\/([\w\-\]+[\.\/]?) +

  as in

  ([app.findGrepPreferences.findWhat = ' http\:\/\/([\w\-\]+[\.\/]?) +';

  I tried to add?,-?, and? but it bombards the - no match.

  Same with initial either / or between http as the beginning of the pattern and www.

  I wonder if a grep javascript guru could give me a clue as to how to translate it?

  Thank you.

  Hey!

  Definition of GREP via JavaScript needs to use to escape. If your GREP in JS expression would look like this:

  app.findGrepPreferences.findWhat = "(www|http\\:\\/\\/)([\\w\\-\\?\\=\\&]+[\\.\/]?)+";
  

  Hope that helps.

  --

  tomaxxi

  http://indisnip.WordPress.com/

• Impossible to cut and paste with the mouse right button

  I can't copy / paste with my right mouse button. When I click the right mouse button, nothing happens.

  Hello davi55,

  ·         Is - what the right click does not work with Windows Explorer or other applications such as text processors or Internet Explorer?

  ·         Did you install all the applications recently on your computer that might have caused this problem?

  ·         What kind of mouse you are using on your computer?

  ·         Are you able to cut dough using the keyboard?

  You can follow the link below and follow the steps proposed by MalkeleahMVP contextual talks about removing third party menus when right click does not work:

  http://social.answers.Microsoft.com/forums/en/w7repair/thread/ca3eddaf-3fcb-4878-8816-0e9b041fe0be

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• How to turn power on and off with the mouse 6000

  I accidentally turn on the Magnifier and don't know how to get out...

  Hello

  Click on start - go to the ease of Panel - easy access - from the center of control - make the computer easier to see - now uncheck turn on Magnifier - to finish click on apply.

  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  also read the tutorial above while turning the magnifying power.