I can't see my pictures, even if the catalog is here!

Similar Questions

• I can't see my pictures, only of the icons.

  When I go to my photos, all that shows is an icon with mountains on it. If I click on my photo appears. I can't tell what images are what, unless I click on each icon one at a time.

  I tried the solution to uncheck icons only to see in folder options in Control Panel. Did not work.

  I also tried to run scannow.

  so easy when you know just how... so frustrating when you do not have! Thank you!!

• How can I see my pictures saved on the 3.0 photoshop starter edition

  have the photoshop starter edition 3.0 version, I can't access my photos, a message appears indicating that the version is no longer supported.    What can I do to recover my pictures?

  Your photos are just files on your hard drive. everywhere where they were imported to them will be accessible, by default in your "My images/Adobe" folder in your user files. If you know the exact name of the file at least 1, you can of course just use the search function of your operating system...

  Mylenium

• Why can't see my pictures when I open my file and I click on 'VIEW', then I click on "Extra Large, large, medium or small icons"

  Why can't see my pictures when I open my file and I click on 'VIEW', then I click on "Extra Large, large, medium or small icons" only the icon appears with my name in photo below.  I have a heavy task to accomplish and this is a rush rush rush.  Can you help me please?

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• Using large icons, I can't see a picture. The picture flashes for a second then appears the default icon (a lake and mountain)

  original title: Windows Explorer

  Windows Explorer.  Using large icons, I can't see a picture.   The picture flashes for a second then appears the default icon (a lake and mountain). I can only view a photo in the photo library.  This just started happening.  What has gone wrong?

  Miniatures,

  Open your my pictures location, click on organize in the upper left corner, click folder and search options, click the view tab and uncheck the top option, always display icons and never thumbnails, select apply and save.

  Return to your location of my pictures, change the display of the page on the top of the right side next to the question mark symbol, there is another symbol with a menu drop-down symbol, click it and select the medium or large icons options specified.

• When I'm in split mode, I can't see my pictures.  I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2.  Is there a setting in DreamWeaver I can change to take account of my images to be self

  When I'm in split mode, I can't see my pictures.  I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2.  Is there a setting in DreamWeaver, I can change to take account of my images be seen?  Then I see mode live view but not in the edit view.  I use DreamWeaver CS5

  It's normal when you are in mode split with Code and design, while the external use referenced images. There is no setting to fix it.

  As a work around, I normally keep a copy local images in a file of site when working on an html email, then just before the code for the e-mail service hovers over, I'll do a quick search & replace to add the absolute paths for images server copies.

  Live View mode should show images correctly, but editing is not possible in DWCS6 although later versions now have an editor in Live mode.

• Try to open an image in camera raw to see a blue screen with a cross on it. How can I see my picture?

  Try to open an image in camera raw to see a blue screen with a cross on it. How can I see my picture?

  Hi gamaree

  Please open Photoshop CC or CC bridge

  For Windows , go to Edition > Camera raw preferences > uncheck "use graphics processor.

  for MAC , go to Photoshop > Camera raw preferences uncheck 'use graphics processor '.

  

  Let us know if this helps

  ~ Assani

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• G42 - 490 YOU: what changes can I see or wait until after the upgrade of RAM?

  Hello

  My PC model # is G42-490TU, processor - Intel Core (TM) i3 CPU M370,
  RAM: 6.00 GB (2.93 usable), System Type: 32-bit operating system.

  I've recently upgraded RAM 2.00 GB to 6,00 GB with 2.93 GB usable, that's what it shows.

  I want to know if this 2.93 GB of 6,00 GB usable the correct value of the memory that is made available?

  Also, I want to know what changes can I see or wait after upgrading the RAM from 2.00 to 6.00 GB where 2.93 GB is usable? How does this improve the effectiveness of my PC? Is there something that needs to be done on my own apart from adding the RAM to increase performance and the maintenance of my PC?

  Thank you best regards &,.

  Isha

  The problem is the operating system of your laptop is 32-bit.

  A 32-bit operating system can use @ 3.25 GB installed memory.

  Install additional 4 GB to a laptop that had 2 GB was a regrettable mistake.

  As long as the 4 GB memory module you have is compatible, you'd better remove the 2 GB module and put the 4 GB module in its place.

  You won't find a lot of improvement with the current configuration of a 2 GB module and a 4 GB module. With this memory configuration does not work in dual channel mode.  You would be better with two modules of 4 GB, but this is only if you upgrade your operating system to a 64-bit version.

  In fact, you would have improved if your OS is 64-bit. A 64-bit Windows operating system will recognize and use the installed memory.

  If you really want to improve the performance of the laptop, you should consider upgrading to a SATA SSD 256 GB drive at least.

• Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection?

  Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection?  owner of 192.168.1.104:50768 result [svchost.exe] TCP - PC:5357 ESTABLISHED

  Hello

  Thanks for asking!

  This is because the network discovery is turned on.

  If you want, I suggest try tuning off the COAST of the discovery of the network and check if it helps.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Reply back with the results. I'd be happy to help you further.

• HI, how can I scan a picture and only the witout the rest. On a HP Officejet Pro 8600 Plus?

  HI, how can I scan a picture and only the witout the rest. On a HP Officejet Pro 8600 Plus?

  When I scan I got my photo and all white for the rest of the screen

  It has no function of machine harvest in the 8600 software. To get the exact size, you will need to manually set the size for the scans that you do. You can find the setting by clicking on the blue link to advanced settings in the first scan window. Will take you to a place that will allow you to change the size of the scanning area. Hope that helps.

• where can I see what DPI is in the PDF?

  where can I see what DPI is in the PDF?

  A PDF file does not have a DPI (resolution). Instead, it contains a mixture of text, vectors and images, each of which can have a different resolution. If you need to enforce a minimum or maximum, you can use Preflight to verify the criteria you want to apply.

• I get a message when I am importing (this seems to be a duplicate of another picture already in the catalog) pic is grayed out.

  I get a message when I am importing (this seems to be a duplicate of another picture already in the catalog) pic is grayed out.

  From the library module, look for the image with the same filename and see where LR think there already.

• I can't see my pictures on Windows 7!

  I just installed windows 7 on my computer and ALL my files are still on the computer, you can see all the thumbnails. But when I click on the image to open it I get this message "Photo Viewer Windows can not open this photo because you don't have the appropriate permissions to access the location of the file" YET Im the admin and everything? Please help me!

  Hello

  I searched the net and tried all the 'ownership' answer/resolutions that I could find. However none of them worked.
  The problem in the original directory lay turned out that I had put in the photo.
  I had downloaded my memory card in one of my other accounts 'user' and it has locked up there putting "share" with "person". Even if the administrator and 'owner' of the Moose photos, I couldn't access it on my own "user as an administrator account.
  The way I have personally solved the question was to connect to the other user account.
  Click on the hard drive
  Click users
  Click on my account, for example c:\users\carley\my pictures\folder
  Right click 'folder '.
  Scroll down to "Share with" click "specific people."
  Delete all except your own names that should be titled 'owner '.
  Click 'Share' and 'done '.
  Once this is done click on "Record" once more
  Scroll down to "Share with" BUT this time click on "Nobody".
  Check also in this folder properties if the 'read only' box has been checked if yes "uncheck".
  This user journal and journal of return as the "Director".
  Access to the same folder check the settings you have made are the same for the other account, you have to then wait a few minutes and the lock on the photos should disappear and all your photos should appear.
  It worked for me I hope it works for you<3>

• Can I see all my favorites in the Favorites bar, even if they are too many... I want to make additional lines and continue, instred of the arrow/list system.

  I would like to have instant access to all my favorites that I keep my RSS links and ongoing projects there. When they are too many to fit into a line across the screen firefox makes a small drop down menu at the end with everything else in. I find it really boring, it's just the same thing as the bookmarks menu normal; I find it really hard to keep things organized when I can't see all the time. I would like to make a second or even third place in the toolbar, so I still see all my current RSS feeds and Pages. Can I do this? If this does not work on firefox someone know another browser FS, BONES or FREE software that will be?

  Try this extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6937/