Memory HP Mini 110

HP Mini 110 with Windows 7 and 2048-MB-PC2-5300, 533 MHz, DDR2 installed. I wish to have 4096 MB.

Manual States;

Memory module
Spare part number description
Memory module (PC2-5300, 533 MHz, DDR2)
512 MB (for HP Mini 110 and Compaq Mini 110 only) 537663-001
1024MO 537664-001
2048 MB (for PC portable HP Mini 1101 and HP Mini 110 with Mi Mobile installed only) 537665-001 "

The manual States (above), 533 MHz, DDR2 is still difficult to know if I can use a simple 4 GB sodimm.

Question - Will the above computer accept and recognize a single 4096-MB-PC2-5300, 533 - MHz, DDR2 SODIMM?

Hello

There are models of HP Mini 110 autour Grandma and they can only hold 2 GB for this location.

Kind regards.

Tags: Notebooks

Similar Questions

  • Compaq Mini 110: Polarity of power supply jack

    Hello

    I have a HP/Compaq Mini 110 that was given to me because both the battery and the AC adapter was lost. I have a power supply of the correct voltage (19 VDC) and can get an outlet of the right size. I need to know what the polarity of the plug must be, for example, is the center of the end positive or negative? I also need to know if the computer will be also powered if one battery (even dead) is not installed. If it will power-up with the polarity a/c adapter, I'm going to buy a battery, otherwise I don't lose money. Shame on HP/Compaq to not show a pictorial of polarity on the camera body. If I can get going, have enough moxie upgrade to Windows 10? Thank you.

    Here is the Service Manual:

    Manual

    See p. 54 on the hard drive. She straight plug the motherboard, but it shows a cart or make sledding which does not move there and the SSD is welded to a SATA connector. For some time I took one of these apart.

    He's a regular SATA and the size limit, it's what is on the market, not the hardware, so you could theoretically install a 2 TB or a 2.5 inch SATA SSD. You could probably get one inch 80 gig SATA SSD 2.5 for a pittance and it would run as well as he is capable of running.

    The memory you have is DDR2-800, but the system he clocks up to speed DDR2-533.

    The power Jack is soldered to the motherboard and there is no way I know to stretch upward. A lot of youtube videos on the welding on a new jack and you can find the plug for a few dollars. It is not a work that I do, but I saw several times and I think you can probably manage it if you have the soldering equipment.

    If this has answered your questions please make it easier for others to find by marking "accept as a Solution.

  • To increase performance for HP Mini 110

    Hello, I have a HP Mini 110-4250nr PC, bought in the summer 2012.  It is running really slow and frustrating.   It takes up to 30 seconds to do something simple, like open Internet Explorer or any type of file.  Documents can take up to a minute.

    I still have the Windows 7 starter is it came with.  I use it mainly for writing.  I have Microsoft Office on it and while running Word 2013 there is a lag, the screen is not follow my typing speed.

    If I update to windows 8 performances will improve?  I don't want to drop money on the upgrade to get the same result.

    A hardware upgrade will be necessary?

    Hello

    The following link shows the specifications of your machine:

    http://support.HP.com/us-en/document/c03377528

    It has only 1 GB of RAM, the upgrade to 2 GB of RAM, you can see a lot of improvement. Machine has only ONE RAM slot, to throw away the key 1 GB and buy a 2 GB key. This is the cheapest way.

    There's something else would run the machine faster: replace the 5400 RPM HDD with a SSD, but please consider cost/performance. You can buy RAM from the next provider or use the information to buy elsewhere:

    http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+mini/HP+mini+110-4250NR-upgrades.html

    Kind regards.

  • HP Mini 110-3744TU Netbook RAM UPGRADE.

    I just bought this camera yesterday (HP Mini 110-3744TU Netbook)

    Specs are below,

    • Color: black
    • Quantity: 1
    • Dimensions (WDH): 420 x 110 x 260
    • Weight: 1.3 Kg
    • CPU: Intel Atom N570 (dual core)
    • Processor: 1.66GHZ
    • RAM: 1 GB
    • Hard drive: 250 GB
    • Screen size: 10.1 "
    • Connectivity: 802.11b/g/n + BT
    • Graphics Intel Graphics (shared)
    • Optical drive: no
    • Webcam: Yes
    • Operating system: Windows 7 Starter

    I would like to perform an upgrade of ram but with some research online, however, little said it can be upgraded to 4 GB of ram.

    But contradicted by source

    http://Ark.Intel.com/products/55637/Intel-Atom-Processor-N570-%281M-cache-1_66-GHz%29

    Can you please help me with this problem or can confirm any information on how this HP mini can support or even if the bios can support?

    Just one thing, what brand is best to use for this update... G. Skill or Kingston?

    Thanks to all =)

    You are the very welcome.

    I personally know anyone who has developed a mini 110 4 GB of memory.

    If you can use the 4 GB chip in another notebook or can return it if it doesn't work, you can try it, but I still think that it would not work. I don't think that the laptop would boot.

    2 GB is guaranteed.

    Paul

  • DDR3 maximum size for HP Mini 110-3546tu PC

    Hai all the...

    help me brother & master

    I want to upgrade my computer laptop ddr3

    but the idon't know how to maximum size for laptop PC series ddr3

    HP Mini 110-3546tu PC

    Thank you all

    Hello:

    Here is the link to the service manual for your laptop.

    http://h10032.www1.HP.com/CTG/manual/c02842192

    Info upgrade memory are in Chapter 1, page 2.

    Max is 1 x 2 GB chip.  You must remove the memory 1 GB chip and replace it with a 2 GB memory chip.

  • HP Mini 110-3101TU: HP Mini 110-3101TU is not compatible with Windows 10?

    I've been running my HP Mini laptop in Windows 7, IE11 with an external (extended desktop) Samsung SyncMaster LS23A300BS/XP with no problems of navigation. All drivers up to date. I received a free upgrade for Windows 10 I installed online 2 weeks ago and have not been able to make a good navigation on the internet yet, either on board or IE11: both crash in browsers after a 2nd or 3rd browser, blocking and the opening page process may not be finished in Manager tasks so that Windows can not stop (you need to disconnect). I followed all the advice, corrections and common sense (clean boot) pertaining to this crash, but nothing works. On top of this crash, there is a problem with the application of Windows Explorer which can not read a statement in memory at shutdown of Windows 10 and must be closed in the first place. The last problem occurs only (I think) when working with the external montor, when I work with the laptop only I've not seen this message (can not read the instructions...) when stopped down, but blocks the navigation happens tirelessly with one or two monitors.

    I played with the DNS (using automatic 8.8.8.8 etc. and DNS), I also run a PowerShell (tip forum) command and disabled non-Windows file extensions and all supplements but did not touch the registry other than adding two words for maximum 10 tabs/server. Nothing helps.

    Question: My Mini laptop too old and incompatible (surfing the internet) with Windows 10 or maybe Windows 10 faulty (buggy)?

    I am writing this post with my old Compac HP 8710p with the same monitor external but digital (DVI/HDMI cable) in VistaSP2 32bits Business that works like a 'charm' (pun intended). I could not even connect you to this forum with Windows (crash) 10.

    Any suggestions and help would be appreciated

    Track 5 September 19:00 (GMT + 8 hrs.)

    Not crashing with browsers (Edge and IE11) but still very slow and often-page response cannot be found and freeze, then after updating but I am now able to close the frozen pages (no more crashing, process in normal Task Manager). The message Windows Explorer app that it cannot read a statement in memory occurs that when my external browser is connected (2 active monitors) and does not show using my laptop just so it's probably Intel graphics driver related. I didn't know I was downloading Defender 5 updates yesterday that there is nowhere a notification in Windows, 10 with a slow (home, 2 G WIFI) internet connection may have caused some of my problems, but Microsoft has promised to look into the crash problems I brought today and I'll post the results shortly. I type this follow-up with my HP Mini and IE11, Windows 10...

    Frank

    To follow this thread on the Microsoft Forum please see:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-networking/HP-mini-110-3101tu-not-compatible-with-Windows-10/262e92c9-5f73-4333-BC46-fb5b229fbdea

    Frank

    Updated: 9 September

    I found three issues that I fixed and most of the problems have disappeared now, internet Windows response is still slow compared to VistaSP2 and IE9 but which can improve with W10 updated.

    The last driver Synaptics touchpad from Synaptics and Windows 10 fix1 support web page: load automatically downloaded an update.

    Correction 2: Downloaded Intel driver 3150 8.14.10.2230 (2010) of the web page of the HP support and ran Windows 10 compatibility check, saved results to setup.exe and then install the (older) driver on my graphics driver (2015) Intel 3150 more recent that I have downloaded from the Intel support web page but is not compatible with the HP Mini 110 series. This caused the accidents of Edge and IE11 (zoom).

    Fix 3: run 2 commands (admin) NETSH: netsh winsock reset and netsh int ip reset c:\resetlog.txt which improves the response of browsers, but after restarting the need for procedures to be repeated, if all goes well in a future update of the W10, will address this issue.

    I think that my HP Mini is now compatible Windows 10

    Frank

  • HP mini 110 RAM computer

    IM thinking of upgrading the ram on my computer hp mini 110-3601, but he got a choice of 2 the first is: 2GB 1600 MHz 240-pin PC3-12800, shared DDR3 SDRAM small contour double In-Line Memory Module (SODIMM) and the second is: 2 GB 1600 Mhz PC3 - 12800 memory module (SHARED) I want to know what is the diference between them and which one is better as im under w7 family premium can someone help?

    Hello

    You can buy RAM from the provider above if you want, they are very good. Otherwise, use the information to buy other brands. It has a location so you can buy 1 stick of 2 GB.

    Kind regards.

  • HP Mini 110-3110nr: increase the RAM on a 3110 mini110?

    My HP Mini 110-3110nr has 1 g RAM.  Can I increase that 2 GB or more?

    Thank you!

    -Ken

    Hi, Ken:

    Here is the link to the service manual for your laptop.

    http://support.HP.com/us-en/product/HP-mini-110-3100-PC-series/4247541/model/4345975/manuals

    Info upgrade memory are in Chapter 1, page 2.

    You need to remove the 1 GB chip you have in there now and replace with a 2 GB chip.

    You want to get a memory module 2 GB PC2-5300 (667 MHz) for optimal performance.

  • HP mini 110-3500 laptop: computer laptop HP mini 110-3500 fails to start after the SSD upgrade

    Hello
    I recently bought a ' crucial 250 gb 2.5 "SSD and 2 GB of RAM (also by crucial), to upgrade my laptop HP mini 110-3500, who has been extremely slow. But unfortunately, the laptop refused to start when turned on. What can I do? I am very worried.
    Enkay1

    You answered. That's what I thought. You have DDR3L-1600 low voltage 1.35 volts. Low voltage will operate at a higher voltage (1.5 volts), but it is not the ideal memory for older hardware. Need memory DDR3-1333 name specified for the HP laptop. You can confirm or refute my diagnosis by putting in the memory of the old and see if it boots.

    It's the part number you need:

    621567 001

    http://www.eBay.com/ITM/2GB-compat-to-621567-001-A3803335-A4100445-A4427375-/230655741975?PT=LH_DefaultDomain_0&hash=item35b4275017

    Is your memory has 8 black on the side blocks or just 4? You want 8. Also if you have Windows 7 Starter, you can not use 2 GB of RAM.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Compaq mini 110 c-1030sv ram upgrade

    Hello. My name is nick and I have a compaq mini 110 c-1030sv netbook and I want to ubgrade my ram. It is possible to do it on this netbook? And also, if I can, I want to know how many gigabytes, it may be. (I want to 2 GB).

    Thank you

    Hello:

    Here is the link to the service manual for your laptop.

    You can remove the module 1 GB in there now and replace it with a module of memory 2 GB PC2 - 5300 (DDR2 - 667 Mhz).

    http://h10032.www1.HP.com/CTG/manual/c01757458.PDF

  • computer HP mini 110 won't boot recovery disc

    HP mini 110 dosnt have embedded dvd player and will not load the dvd collection I have orderd from hp through the external dvd player. is it possible to change the file system of the dvd and put it on a USB key?  or is it possible to get the recovery media to run on the mini? It is the complete crash and don't know what else to do. It pases hd test and memory test through the bios...

    It's actually pretty simple. The method you described does not work because it is not is not a bootable flash drive.

    The following video tutorial shows just how do. All you need to do is get past about twenty seconds of terrible sounds at the beginning of the video. The rest of the video is silent.

  • HP mini 110-3600evPC: Webcam not recognized

    In my hp mini 110-3600evPC, original operating system model LK954EA is Windows 7 starter, but I put 8 32-bit Windows to it before a few months, I try to get Skype call and for the moment, I see the ball in webcam is not recognized by my computer hp mini so Skype say connect the camera for vedio call that happened to my ball in camera and how to correct it.please help me Skype is so very important to me and it's very serious for me. Thank you

    Karthik thanks, now I have another problem can I install windows 10 in above laptop
    All are as original, but I upgrade memory ram from 1 GB to 2GB thank you again

  • HP Mini 110-3600 sd screen problem

    Hi all

    I have a problem with the screen of my HP Mini 110-3600 sd (product code LD078EA #ABH). Yesterday morning all of a sudden it became too small for the content, which means that the bottom was not visible (for example windows, I use windows 7 starter edition). To be clear, that the full screen doesn't work, if I maximize the view, it's actually too short. The night before, it was working fine and I did not install anything until I turned it off.

    I tried to install the new drivers and using the different resolution but nothing seems to work. What I find strange is that when I look at op the specs of this laptop it says it works at 1024 x 600, but the pc is recommended to run in 1024 x 768 60 Hz. (The screen has never been replaced) The laptop seems to be confused about her size and position, if I chose a resolution '1024 x 600' and 'centre screen' it looks like the screen space, but he put a black in the top column, so that in the end, she always falls short. And, although I'm not sure about this, I thought the laptop used to support a higher resolution, before this problem (1360 x 768 perhaps?).

    Below, I've included a story on the monitor (or pilot), if more info is needed I would bring him a pleasure (but I'm not experienced enough to know what you guys should be now).

    Intel(r) Graphics Media Accelerator Driver for Mobile report

    Report date: 31/08/2013
    Report time [hr:mm:ss]: 16:18:43
    Driver version: 8.14.10.2230
    Operating system: Windows 7 Starter *, Service Pack 1 (6.1.7601)
    Default language: Dutch
    DirectX version *: 11.0
    Physical memory: 1011 MB
    Minimum graphics memory: 8 MB
    Maximum graphics memory: 249 MB
    Used graphics memory: 93 MB
    Processor: x 86 family 6 Model 28 Stepping 10
    Processor speed: 1662 MHZ
    Vendor ID: 8086
    Device ID: A011
    Review of the unit: 00

    * Accelerator information *.

    Accelerator in use: Intel (r) Graphics Media Accelerator 3150
    Video BIOS: 2036.0
    Graph current mode: 1024 x 768 True Color (60 Hz)

    * The devices connected to the graphics accelerator *.

    Active screens: 1

    * Laptop *.

    Name of the monitor: digital LCD-scherm (1024 x 768 60 Hz)
    Display type: digital
    Gamma value: 3.54
    DDC2 Protocol: support
    Maximum Image size: Horizontal: not available
    Vertical: Not available
    Watch taken Modes supported:
    1024 x 768 (60 Hz)
    Display Power Management Support:
    Standby mode: not supported
    Standby mode: not supported
    Active off the coast of the Mode: supported
    Raw EDID:
    00 ff ff ff ff ff ff 00 36 03 00 03 00 00 00 7f
    2f of ff 0c 01 03 80 00 00 00 00 a0 00 57 49 9 b 26
    10 4f 48 00 00 00 01 01 01 01 01 01 01 01 01 01
    01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88
    36 00 00 00 00 00 00 18 00 00 00 00 00 3 c 00 fd
    EB 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68

    * Other names and brands are the property of their respective owners.

    I really hope you can help me, because I am abroad and need the laptop to support my study.

    Thank you

    I see. Thanks for letting me know that. I see some other posts on this thread that mention check video cable as it passes through the hinges. It is a common problem for all laptop computers with cables video/camera/wireless antenna through the hinges.

    Here's your Guide to Service and Maintenance. Display Assembly removal starts on page 61.

  • -HP Mini 110-1025DX closed by itself while downloading the BIOS driver and now does not turn

    I have reintalled windows xp then download, audio driver gave error when downloading and I read on the internet that unless I have download BIOS, she held in error, so I downloaded "WinFlash for HP NetBook system BIOS - Microsoft Windows-Based" and while it was installing I did something else, and when returned, not e book had closed and now does not turn.

    the specifications are also less

    -HP Mini 110-1025DX PC
    Serial number: CNU9316D45
    Product number: VA723UA -.
    Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025 - 1629)
    Language: English (regional setting: English)
    Manufacturer: Hewlett-Packard
    Model: HP Mini 110-1000
    BIOS: KBC Version 02.0 B
    Processor: Intel (r) CPU Atom N270 @ 1.60 GHz (2 CPUs)
    Memory: RAM 1016MB
    Page file: 514MB used, 1927 MB of available space
    Windows Dir: C:\WINDOWS
    DirectX version: DirectX 9 .0c (4.09.0000.0904)
    DX setup parameters: not found
    DxDiag Version: 5.03.2600.5512 32 bit Unicode

    What should I do?        Thank you

    It won't turn? The lights come?

    Let's first, remove the battery and unplug the power adapter and leave without electricity for a minute... then reconnect and see if it is eaten on.

  • Update Windows for mini 110

    It is advisable to upgrade my version of mini 110-1100 of windows windows 7 starter edition to a higher version?

    Hello:

    Your laptop is capable of running other versions of Windows 7.

    If you want to upgrade depends on what features you want beyond the Windows 7 Starter Edition you have.

    http://Windows.Microsoft.com/en-us/Windows7/products/compare

    I would also recommend max memory to 2 GB if you install another version of W7.  You may have already made in all cases. If you do not you would need to remove the chip from 1 GB and install a module of memory 2 GB PC2 - 5300.

    Paul

Maybe you are looking for