I can't the mixer volume to recognize the speakers. ___

Similar Questions

• T sound recording have no sound period. my device is not plugged in, but it is. I can hear the speakers crackling so I know they work someone can help?

  As a first step I disconnect and then reconnect the speakers and it would work again, but so far nothing.

  Hello

  
  1. don't you make changes on the computer before the show?
  2. which version of the operating system are you using on the
  computer?
  
  Method 1:
  Try the steps in the link and check if this may help:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:
  If you use windows vista and windows 7, you can try the procedure described in "sounds of my speakers is crackling or distorted" link and check.
  Windows 7:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  Windows Vista.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• does not recognize my speakers

  Windows does not recognize my speakers.  in the volume control, it says "no audio device" the speakers on another system and the computer does not recognize same helmet when theyre plugged.  HOW can I get my computer to recognize my speakers?

  Hi teetodad,

  1 run the fix it from the link below and check if this can help: diagnose and automatically repair audio playback problems:http://support.microsoft.com/mats/no_sound/en-us

  2. in addition, try the steps listed in the link below: how to troubleshoot sound problems in Windows XP:http://support.microsoft.com/kb/307918

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• Problem with the mixer Volume of Windows: no longer shows the green bars for the application

  Hi all!
  Sorry for my bad English, but it is not my mother language: s
  I have a PC with Windows Vista Ultimate SP2 x 32 with this issue: the volume mixer show me the green bar (indicating the volume level) for the speakers and not for other applications like windows media player, for example.
  Perhaps this screen explains more: http://img11.imageshack.us/img11/4538/immaginevfo.jpg
  I hope someone can help me (if someone understands how I speak English: S)

  Thanks, TheDarkTrainer

  Hi TheDarkTrainer,

  Thanks for posting your question on the Forums of Windows Vista.

  I need more information to help you better.

  1. What is the brand and model of the card its installed on the computer?

  2 - is the first time you encounter the problem?

  For single channel sound cards, you will only be able to see the green bar for Master Volume control and not for other applications such as Windows Media Player.

  Controls on other applications are given to control the volume of the special request regarding the Master Volume control.

  For example, if you scroll the bar to set the Master Volume to 100% and then play a music file in Windows Media Player. You can try to open the mixer Volume and increase/decrease the volume for Windows Media Player, you will notice that the master control will set the green bar accordingly and don't let not the green bar to cross the bar of the Windows Media Player.

  If you disable the control Volume for Windows Media Player, it will automatically make the green bar will disappear from the Master Volume control.

  However, if you have several applications running on the machine at the same time and using the sound card, you can try to change the levels on different controls to see the effect.

  With several cards his channel as sound blasters, it would be possible to see the green bar on individual applications also.

  Hope the information will help. Please post back and we do know

  Thank you & best regards
  Ashish Gupta - Microsoft Support

  ===================================
  Calm sea never make skillful sailors!

• Scrolling the mouse will pass only volume in the mixer volume if flying over directly.

  By clicking on the mixer volume bottom right of your taskbar displays the master volume mixer. Normally once you do this, you can adjust the volume by using the scroll wheel on your mouse whenever your mouse is on the desktop. In my case this works if my mouse is located directly on the bar, not only the popup volume [see red outline in pic].

  This problem came after I formatted my computer, I have no other problems. I checked the latest updated driver for my mouse and used the driver or program is to my mouse but nothing worked. It's frustrating because literally every single other computer, this option doesn't work. Specifications of the computer below. The next thing I want to try is switching on the mouse, I just have to get your hands on one. Meanwhile the guys/girls do you have ideas? I think there must be some kind of software or questioning.

  Volume control:

  

  Specifications of the computer:

  CENTRAL PROCESSING UNIT	Intel Core i5 - 2500 K 3.3 GHz Quad-Core processor [1]
  Motherboard	Asus P8Z77-M PRO Micro ATX LGA1155 motherboard [2]
  Memory	G.Skill Sniper Series 8 GB (2 x 4 GB) DDR3-1600 memory [3]
  Storage	OCZ Vertex 3 120 GB 2.5 "Solid State Drive [4]
  Storage	Western Digital Caviar Green 2 TB 3.5 "internal hard drive 5400 RPM [5]
  Video card	EVGA GeForce GTX 770 2 GB Dual ACX Superclocked graphics card [6]
  Case	Antec a mid tower case ATX [7]
  Power supply	Cooler Master eXtreme Power 600W ATX Power Supply [8]
  Optical drive	ASUS DVD-E818AAT/BLK/B/GEN DVD/CD player [9]
  Operating system	Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit) [10]
  Wireless network adapter	Wi - Fi adapter D - Link DWA - 566 802.11a/g/n PCI-Express x 1 [11]
  Mouse	Gigabyte M6900
  Keyboard	Microsoft wired keyboard 600, model 1366

  I determined the problem, this is for all those who may have a similar problem in the future.

  It's a mouse button assigning app called 'X - Mouse Button Control' I use this app to assign my 4 and 5 mouse button to the multimedia keys. To re install this application after I formatted my computer a setting has been changed. Specifically 'Make scroll wheel scroll window under cursor' once I have disabled this feature all my problems have been solved.

• My icon of Mixer volume on the taskbar does not open

  My icon is still there but when I click it nothing happens I click with the right button and click on the open volume mixer and still nothing going on all other options when I right click on the icon work but not the opening mixer

  Why this is happening and how to fix it?

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. As I understand it, the icon of Mixer volume on the taskbar does not open. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2. what happens when you try to open the icon of Mixer volume on the taskbar?
  3. you receive an error message?

  Method 1:

  Check if the following steps help you.
  a. Click Start.
  b. click Control Panel and then sound.
  c. double-click speakers.
  d. under the Advanced tab, check the option 'allow applications to take exclusive control of this device. Click OK.

  Method 2:
  Try the clean boot to verify if all third-party services to cause this problem, here is the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:

  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  If you need further assistance, please answer and we will be happy to help you.

• Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

  Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If this does not help, I would like to try a restore:

  https://support.Apple.com/en-us/HT201252

• Distance... How you can set the amplifier to the default volume?

  Does anyone know how to set your amp to the default volume control without having to switch between devices to change the volume?

  Can you have 2 devices on the screen at the same time. As the box of cable and the AGP?

  I had other remote controls sony who would do it.

  Yes, you can change the order in the upper right to start.

• Audio volume is at 100% but can barely hear the speakers. Help?

  Audio volume is at 100% but can barely hear the speakers. Help?

  Please read this blog to find out how to troubleshoot audio http://blogs.technet.com/b/mediaq/archive/2015/07/30/windows_2d00_10_2d00_audio_2d00_troubleshooting_2d00_tips.aspx

• volume icon shows only not in the taskbar properties / can not the volume of the Wo

  When I opened the hidden icons on the taskbar... threre is no icon volume adjust the volume. How can I adjust the volume and display the icon

  Hello

  Thank you for giving us the opportunity to answer your question of Windows!

  Volume in the task bar icon is missing.

  You can access the same service using the control panel.

  However if it please check out the following link and check if this is useful:

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the in the Windows registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  http://support.Microsoft.com/kb/945011/en-us

  I hope that helps!

  If the problem persists, or you need help on Windows please keep us laid.

  We are here to help.

• How can I get Photoshop CS5 to recognize the raw files from my Nikon D750. I have crossed on online help, but have not found an action that works

  How can I get Photoshop CS5 to recognize Raw of Nikon D750 files. I went through online help, but have not been able to solve the problem. Graham Atkins

  Hi fathered,

  Photoshop CS5 to read files from Nikon D750 to atleast Camera Raw 8.7 or higher.

  However, I believe that you would not be able to update Camera Raw, so you can download and install the DNG Converter and convert the files to DNG.

  Kind regards.

  Tanuj

• I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade and fade out and the yel

  I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?

  Rickey

  Thanks for the follow-up report.

  Just a lit bulb. Maybe the answer, maybe a spleen.

  Look carefully at the audio track of the timeline in the vicinity of title of the file.

  

  The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where

  the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with

  Volume: level as shown in the screenshot.

  Hope it's the factor involved.

  RTA

• Ho I convert my catalog of items 5 to 13 items that I just bought.  I took one of the tutorials and I converted my catalog of 5 elements in a file 'pse.13db '.  How can I get 13 elements to recognize this converted file?  When I open it Ca 13 items

  Ho I convert my catalog of items 5 to 13 items that I just bought.  I took one of the tutorials and I converted my catalog of 5 elements in a file 'pse.13db '.  How can I get 13 elements to recognize this converted file?  When I open elements 13 Catalog Manager and navigate to the correct location, it does not show the file.  Help!  Thank you

  Hi bumps and Spooley,.

  Would it be possible for us to have a look at the file catalog.pse13db from your machine?

  If the file size is not too large, please feel free to send me by email @ [email protected]. If it is too big, I'll share with you a Dropbox folder where you can download the same.

  Thank you

  Catherine

• You can test the volume who is currnetly selected?

  I want to know if the file I selected in bridge can be identified as the selected folder?

  As if(00318-000.selected==true) {(//then do something) something of this nature.} I can test if a volume

  var myMacHotFolder=(Folder(["/Volumes/Hotfolders/OdystarHotfolder/eDesign"]).exists);
  

  What I want to know is can be identified as being retained in the bridge? Then, I want to get the name of it.

  You can get the current folder with: -.

  alert(app.document.presentationPath);