I can't turn on my fire wall of Windows Vista.

Similar Questions

• How can I turn off the screen saver in Windows Vista?

  How, under Vista, disable my screensaver?  I'm trying to update my tomtom gps device and the screen saver must be disabled for me to receive a long download!    How can I disable the screensaver on Vista?

  Hello

  Please contact the Microsoft Community.

  I wish that refer you to this article-

  http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

  Let us know if you have problems with Windows in the future.

• I can't download the service pack 1 of windows vista.

  Impossible to download service pack 1 for vista

  I can't download the service pack 1 of windows vista.  I didn't bother with it so far because I now have a new router and I download to configure the router.

  Download the SP1 installation file in a folder and then double-click to manually install Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=30

  Note: Service Pack 2 is also available: http://www.microsoft.com/download/en/details.aspx?id=16468

  J W Stuart: http://www.pagestart.com

• How can I disable smooth edges of fonts with Windows Vista?

  Please, please... I need help from someone obviously smarter than I am. I thought I was just on the pc, but I've proved very obviously I was mistaken.
  I would greatly appreciate any help someone could give me about the following question. I ' v tried the search with the help of Windows Vista, myself, but again, I'm obviously too stupid or slow down and have not been able to find the answer there either. He who can give me the answer, I would be so grateful, I got lov to reciprocate somehow I can, like research, graphics, or any work that I can because that would really mean a lot to me.
  So, here is my question:

  How can I disable smooth edges of fonts with Windows Vista?

  
  
  Bex

  Hello

  I suggest you to return the item and check if it helps:

  ClearType: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/ClearType-frequently-asked-questions

• When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  Hello

  -Remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   

  Step 2:

  If the computer starts in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

  Step 3:

  If you haven't already done so, I would say doing a full scan on your system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Conversion: Can I use Corel WordPefrect 8 data with Windows Vista files?

  Can I use data files Corel WordPefrect 8 with Windows Vista?

  On Friday, June 11, 2010 17:03:40 + 0000, grandmadfs wrote:
   
  > Can I use Corel WordPefrect 8 data with Windows Vista files?
   
   
   
  The issue here is not one of which version of Windows you are using.
  It is one of what you have installed applications.
   
  The answer is Yes, if you have WordPerfect (or some compatible)
  program) installed on Windows Vista. The answer is no, if you do not.
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• How can I reset the time and date on Windows Vista?

  How can I reset the time and date on Windows Vista

  http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html

  http://www.Vistax64.com/tutorials/114989-date-time-change.html

  Read the information in one of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I remove a redundant entry of the Windows Vista 32-bit NT loader;

  How can I remove a redundant entry of the Windows Vista 32-bit NT loader; (The entrance there is an older operating system).

  Hi poomoon,

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If this does not work, let us try to restore your computer to a previous state of safe mode.
  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. in the System Restore dialog box, click Next.
  4. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  5. click on finish.
  6. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  I suggest that you create a restore point before you follow the instructions below.
  How to manually create a restore point?

  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.

  In the System Protection dialog box, type a description, and then click on create.

  You can also try to remove the entry by using bcdedit command in Vista by following the links below.
  1. click on start.
  2. type cmd and click with the right button on cmd.exe to select run as administrator.
  3. Enter the following text.

  bcdedit [{ID}] /deletevalue datatatype

  The {ID} is the GUID associated with the start-up input. If you do not specify a {ID}, the command changes the current operating system boot entry. If a boot entry is specified, the GUID associated with the start-up input must be enclosed in braces {}. To view the GUIDs for all active startup entries, use the bcdedit/enum command.

  For more information, please see the links below.
  http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx
  http://msdn.Microsoft.com/en-us/library/aa906211.aspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How can I get the old search wizard on windows vista/windows 7?

  Original title: bringing research research assistant, new bad engine

  Dear all.

  I like Windows XP search assistant as if worked as an engine of 'real' research, for example, bing, google and search keywords.
  The current one is too basic to windows vista and windows 7 is rubbish and doesn't like the old.

  How can I get the old search wizard on windows vista/windows 7?  If I can't do it, how I'd get that to happen?

  Your

  Tom2020

  HI Tom2020,

  If you want to leave comments about the research, please do so at:

  Windows 7 comments

• I can't install most recent acrobat as my windows vista. What can I do?

  I can't install most recent acrobat as my windows vista. What can I do?

  Hi davidm78969556,

  With the new version, I think you are talking about Acrobat DC.

  Acrobat CC is not compatible with Windows Vista. Please check the system requirements before installing the software system requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC.

  Kind regards

  Nicos

• How can I turn off Acrobat 9 from a Windows XP computer?  And re-enable Windows 8?

  Can I turn off Acrobat 9 Pro from a Windows XP computer?

  Can I reactivate Acrobat 9 on Windows 7 or 8?

  Hello

  You can navigate to help > deactivate to deactivate Acrobat 9 machine Windows XP, you would not be able to install and reactivate it on Windows 8 but it is not a version compatible with Windows 7 and 8.

  Concerning

  Sukrit diallo

• I can't turn on my firewall, error: Firewall Windows cannot change some of your settings Error code: 0 x 80070424

  My firewall is off, I went to control panel to turn it on and it comes up saying "Windows Firewall cannot change some of your settings Error code: 0 x 80070424" any ideas how to fix or what's goin'?

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Can the 'scan to email' function work with Windows Vista?

  I would like to install the 'scan to email' function with my HP Pavilion dv4 laptop using Windows Vista.  Can it be done?  If so, how do I configure it?  Thank you.  Judy

  Thanks for your reply.  It turns out that I needed to download the Officejet 6500 Wireless on my PC software to operate.  I couldn't use the software that was already loaded laptop from my husband, who works in Windows 7.  If I had the software on my desktop computer, your instructions likely would have worked.  I appreciated you taking the time to answer.

  Judy

• Mode of continuous reboot after an unsuccessful attempt, how can I return to a functional version of windows (Vista or 7)?

  I tried to upgrade to Windows 7 Vista SP1 from a disk of retail bought at Costco.  I received an unsuccessful installation and everything seems to be ok with a rolling Vista.  I woke up this morning to my system stuck in reboot mode.  I can't even Windows Safe Mode to work.  What can I do to get back to Vista?  I promise you that I'll never try to update again... Please help.

  Hi HelpPleaseWindows7,
   
  Thanks for visiting the site of Microsoft Windows Vista Community!
   
  (1) remove any external devices like floppies, CD, flash, printers and computer DVD drives and restart.
  (2) If this helps not to start your computer, use the Vista installation cd
  (3) try to get the error message by disabling "auto restart in case of system failure"

  If you have a Windows Vista installation disc:
  Insert the installation disc.
  Restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  If you are prompted, press any key to start Windows from the installation disc.
  Note
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  (BIOS WARNING):
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk).
  Choose your language settings, and then click Next.
  Click on repair your computer.
  Select the operating system you want to repair, and then click Next.
  In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
  If the Startup Repair tool is an option of recovering preinstalled on your computer:
  Remove all floppy disks, CDs and DVDs from your computer and restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  Do one of the following:
  If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.
  In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).
  Select a keyboard layout, and then click Next.
  Select a user name and password, and then click OK.
  In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Follow this link for more information: http://windows.microsoft.com/en-us/windows-vista/Startup-Repair-frequently-asked-questions

  Perform the system restore
  Follow this link: http://windows.microsoft.com/en-us/windows-vista/Turn-back-time-on-your-PC-Undo-system-changes-with-System-Restore
   
   
  I hope this information helps!
   
  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How to turn off the mode 'sleep' on Windows VISTA

  OK, so I have windows VISTA version 6 and I can't take off mode "Eve". It started 2 days ago and I was online, watch a movie when all of a sudden it came into fashion 'sleep'. I tried to turn it off. I use safe mode which helps my computer work, but I can't listen to music or watch videos. Please, how do you put it back to normal.

  Start > in the search box, type power options > press the Enter key > left side, click on "Change when the computer sleeps" > on battery and plugged in, click on the pointer and change it FOREVER > click on save changes