I can't use my USB ports on my Satellite A30

Similar Questions

• Can not use the USB ports on my Satellite P10

  I have a laptop Toshiba Satellite P10 3 years computer that has 3 USB ports. None of them works although the power is coming from them than my external mouse upwards but lights does not work. In Device Manager it says that everything is working ok IE all the drivers, etc. I was told that it's probably the motherboard?

  Maplins it's a software problem. I tried a PCI card with USB port but they no longer work. The PCI location is fine but as my wireless adapter card works from there ok. I restored the computer 3 times and each time the USB ports do not work.
  Any suggestions? I want to add an external mouse drive DVD etc...

  Any help appreciated... Mark

  Hello

  Did you use the clean Toshiba Recovery CD to restore the operating system on your laptop or have you installed the operating system from the original Windows CD.
  I advise to use the Toshiba Recovery CD because all the driver and patches installed on this CD.

  The USB ports provide a current of 500 ma, and it is a standard. If several external devices connected to ports needs more power as 500mA, then it of possible that the laptop does not detect USB devices several.

  In Device Manager, you may turn off the power save the unique option to the USB ports.
  You can do this in the properties of the USB port

  Additional I advise to use a USB hub with external power clean.
  These devices are not very expensive and will allow you to connect and use several devices together.

• I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  Have you plugged your monitor with a USB cable to your computer?

• How can I use the USB ports in Windows XP Mode?

  Windows XP mode

  I need to use the USB port, but are not available in Windows XP mode, how do they available?

  Thanks, I need an answer soon.

  Plug the USB device, click the USB menu

  Click Attach device.

  Please wait while this one is initialized.

• Use the USB port to emulate keyboard

  Hello

  Is it possible to use a USB port of an on-board controller (PXI8108) to replicate a keyboard when plugged on a device waits

  a USB keyboard?

  Thank you

  Gary.

  What I understand about USB, I don't think that you can do.

  The USB ports on the PXI controller host ports are and as such cannot be used as ports of the device. A keyboard would be a HID device class. Maybe it's a kind of emulator HID that could be placed between the PXI and your USE awaits a USB keyboard...

• HP Deskjet 1010: Wireless printing through a TG1672G of ARRIS, use the USB port on the modem?

  It is possibel to print wireless with a TG1672G of ARRIS, use the USB port on the modem?

  Hello

  There is no print server function so you can not:

  http://gditechnology.com/manuals/Arris_TG1672G_Data_Sheet.PDF

  Kind regards.

• Can I use two USB 6211 to replace a USB-6009

  Hello

  I got a labview vi., 5 output channels digital, 2-channel digital input, 2 analog inputs are necessary for the execution of this vi.  Initially a 6009 usb is used to run the vi. But I have only two usb ports 6211 now, which has digital to digital for each data acquisition 4 inputs and 4 outputs. I wonder, can I use two usb 6211 to run the vi. ? What should I do?

  Reverse lines are wrong, does that mean it will display 0 for false and 5 V 1.

  Active drive is the normal mode of the digital output: it generates tension when said.

  I forgot one thing: that you are behind the wheel of these lines, how much power do you need?

  Analog output is less powerful, it can give only 2-4 mA, while the digital output 6009 could give 8 my.

• How to configure a printer LPT when adapted to use a USB Port - Windows Vista Home Premium 64-Bit

  I have a computer that does not have an LPT port, and the printer that I want to use (EPSON Stylus Color 850) is not a USB Port or Ethernet.  I bought a cable USB2LPT and attempted to get the printer to work.

  My problem seems to be the choice of the port to use.  Here are the steps I followed:

  1. pick "Add a printer" of the control panel. Printers
     2 choose 'Add a local printer' (even if using the USB Port, like when I plugged the USB cable into the computer, I received the message installing driver recognition but not familiar "bong".)
     3 selected "use an existing port.
     4 select "USB001 (virtual printer to USB Port) - it was my best estimate of the long list provided."
     5 choose the EPSON Stylus Color 850 ECP2/PCS.

  The pilot was then installed without error and tried to print a test page which is that hangs without error.

  I deleted the printer then tried to assign the LPT1 port.  No help here either.

  If someone can help me with the installation, so I can get my documents to print I would appreciate it a lot.

  Thank you

  Dave

  You do not have an LPT port.  When you select the LPT port data are always written him even if your computer does not have the hardware installed to make it work.  It would work if you have installed a parallel PCI Port card.

  USB001 would be the first choice, then USB002...

  The next step as Fouzan points out is to contact the supplier of cable or Epson for support of printer you.  Start by Epson.

  You can try other cables, parallel PCI card or another printer. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I can't use my USB because of administration system or blocking USB problem.

  Because of my ignorance in the use of some security as USB security guard software and changes in my control panel, now I can't access my USB drive or any external memory device. When I put any external memory via USB device, it is noticed that my USB guard is locked and that the system cannot perform it.so contact your system administrator. But I uninstalled all my software security completely and checked my boot settings and the bios and the problem is still there. so I can't use my USB or external memory device via USB port in my laptop. I use the Windows 7 operating system. so please help me through your friendly consultation.

  Two thoughts. Take a look at this program and see if it finds the remains of security software http://www.revouninstaller.com/ and also to see what runs in your startup using this program.
  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Can I use a USB on an iPad Pro?

  I am looking for an iPad 12.9 pro with a memory of 128 GB. Also obtain loghning usb and keyboard. My question is this: can I use a USB stick with this for transfer autour files?

  For example: I'm starting a word on a desktop document, except at thumb drive and want to continue to work with the iPad Pro. Can I transfer the file to the iPad to change, resave the said folder and then go back on the desk with her?

  Could also transfer other files with this set autour upward?

  I need solutions for mobility and stationery and was looking to use it for small, things go, then an iMac for the intensive stuff.

  My idea would work out?  Thank you for your time and your help.

  You can use the portable hard drives Seagate/Western Digital Wireless

  OR

  These are your only alternatives for of SanDisk USB flash drives.

  https://www.SanDisk.com/home/mobile-device-storage/ixpand

  https://www.SanDisk.com/home/mobile-device-storage/connect-wireless-stick

  Good luck!

• Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

  Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

  Hello

  The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

  

  Best regards

  ERICO

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

• Can I use a USB Flash drive?

  Windows XP Professional - SP3 - Version 2002

  Can I use a USB Flash drive to increase memory? My machine has 512 MB of RAM, and I have a 1.80 GHz CPU Celeron (r) processor.
  From what I've researched, because my OS is Windows XP and I have 512 MB of RAM, I cannot use a 4 GB Flash drive.
  I use a Digital Audio Workstation (DAW) and lots of sample packs and I have need of more memory. My machine is maxed out at 512 MB of RAM.
  If I buy a 4 GB Flash drive, can I load my DAW on the Flash drive and optimal storage space or should I buy a hard drive to accomplish my problem of not having enough memory?

  Thanks in advance!

  512 MB you should be fine for Windows XP. OK, the application may run more slowly than on a modern computer - but performance is reasonable.

  Like me, I have a computer with 1 linear array of 512 MB memory and a 128 MB memory chips - making the total up to almost 640MO - but I use Photoshop CS3 on it daily and it works fine for most tasks.

  However, if you want to get some further improvements to your computer for the RAM intensive applications performance, I would recommend increasing the virtual memory.

  More about memory virtual here-

  http://ask-Leo.com/what_is_virtual_memory.html

  To increase the virtual memory-

  Do a right click my computer > click Properties > Advanced tab > settings under 'Performance' button > Advanced tab in the performance Options window > change button under "virtual memory".

  Now select the custom size option.

  The options below, you can see some details like -

  Minimum allowed - XX MB

  Recommended - XXXX MB

  Currently allocated - XXXX MB

  Make sure that you set the value of initial size (MB) near the recommended space. The value of maximum size to a value much greater than currently allocated space. (But always value less than 2048 maximum size - you don't need that much).

  That could give some amount of performance increase - but he won't give you a magical boost of performance.

• Can I use a USB B Female adapter USB A Female in a HP Pocket Media Bay?

  Can I use a USB B Female adapter USB A Female to transform the unused HP Pocket Media Bay of a s3230uk in an area of loading of MP3?

  Surely a small load player would take less power, then a HARD drive?

  I can confirm it works and is a good way to make use of the space.

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.