I can't use the Exchange Control Panel.

Similar Questions

• T430: Cannot change the GPU using the NVIDIA Control Panel

  Hello world

  I recently bought a T430 including a NVIDIA NVS 5400 M. games graphics card (for example, Max Payne 3) used to run fast, using the NVIDIA GPU. Today, I tried to play a video game once more (after having not played for several weeks). Unfortunately, my OS (Win7, 64-bit) assigns the GPU from Intel, resulting in a much lower speed. Using the NVIDIA Control Panel, I can't change my favorite GPU (changes will not be saved). I already run a update of Lenovo and installed the latest graphics driver (296.88), which resulted in no improvement.

  When you start a game, I can choose my graphics manually, but I would like to configure some general settings using the control panel.

  Do you have any solutions?

  Thank you very much.

  
  

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• I can't find the touchpad Control Panel

  I can't find the touchpad Control Panel.

  @ejake

  Hello

  Download and install the driver for the Touchpad ALPS to here.

• How to: using the same control panel for several vi and reproducing change to the control panel.

  I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

  All controls in the control panel are in a bundle, so all values are passed to 1 thread.

  I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

  I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

  Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

  Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

  Have fun

  Ben

• You can zoom in the effect controls panel?

  Hi all.

  Is it possible to zoom in on the effects Panel? It can be really agitated to change the duration of the effects sometimes. If you can zoom it would make things much easier.

  I can't see any way to do this, but he wanted to check I wasn't missing something.

  Here is a screenshot of the Panel that I refer:

  

  Thank you.

  You are not missing anything. There is no way I know.

• Whenever I use default Firefox to view full screen that I can't get to without abandonment of the application because I can't use the other controls

  It never happened until a couple of days and I knowingly did nothing to put it. I also just now uninstalled and reinstalled Firefox but that did not help anything. My internet explore and all other applications work fine. Only in Firefox now automatically going to display full screen when I launch the application it and I don't know how to get out except by giving up using ctr + alt + delete

  Hello

  Try to push the F11 on the keyboard key. This should be a keyboard shortcut to enable / disable mode full-screen. I also give you a link on how to enable the mode full screen and turn off.

  How to make Firefox and Web sites to go full screen

  Let us know if this solve your problems or not.

  Blunder

• How can I use the same graph of façade in several events in a structure of the event?

  I want to display my sensorDAQ signals in a graph.but I have more than one event in the case where the structure to acquire the signal and display it in the first round of graph.the is to acquire signals from threshold and its shown in the graphic as a feedback.after the first event is executed, I'll call the second event, where the other signals are acuired and compared with signals from threshold of event 1 my question is how can I use the same control on front panel in more than two events in the structure of the event? Please answer me I am stuck.

  Hello

  I have attached here an example of doing the same thing using local variables and shift registers. Take a peek inside. Shift register is always a better option than local variables.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a solution if your problem is resolved)

• After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

  Hello!

  After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

  Thank you!

  

  Hello Ann,.

  I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• Can not get tabs to open when you use the t control or right click of the mouse or from the file drop-down

  OK, so the problem is not able to open new tabs, that I can't open new tabs by using the file drop-down and select it, I can't use Ctrl t, I can't use the button "+" at the end of the tab, and I can't get the right click and select new tab to work. However I can get new tabs by accessing a link on a page right click and selecting Open link in a new tab

  Try to disable or uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar, following a security update in Firefox 3.6.13

• with mappoint 2011 eval, use the mappoint control, how can mappoint_ocx, I get the mousemove fire

  I'm evaluating mappoint 2011,

  When you use the mappoint control, mappoint_ocx, I try to capture the onmousemove event to get the x / y, but the event does not fire for me.

  the mousemove event fires when I zoom or change the selection on the map.

  but I will not fire when I move the ouse arround.

  help bob!

  Hello

  Check with the help of MapPoint and in the MapPoint Forums.

  Highway, Streets & Trips, MapPoint - Forum
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  MapPoiint - Support
  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why can't I download java from the usps, to select my printer and print shipping labels? BTW, how do I get firefox 4.o back, since I can't use the google toolbar, I want to change back

  The java applet will download and I would choose my printer in order to print my label for shipping to the US postal service.

  In addition, can no longer use google toolbar, all my favorites with
  the ff 5.0, so prefer to come back to the ff 4.0.

  Not a good idea to post a phone number in a forum. Any person with access to the forum now has your phone number. Back to the forum, login, click on "Edit" to the right of your message and delete this phone number.

  Many users have restored the features of the Google toolbar by installing the Add-on Compatibility Reporter extension. Google needs to test the toolbar in Firefox 5 and change a single line of their code to make it compatible with Firefox 5.

  Add on Compatibility Reporter: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

  You either do not have Java installed or you have disabled it in modules > Plugins. See if you have Java Platform SE installed version number here. If there and disabled, click on the 'Activate' button and try the site again. If this isn't the case, install Java.

  1. Install or update the Java plugin to the latest version.
     • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
       • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
         
     • See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
     • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
     • Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
     • Java test: http://www.java.com/en/download/help/testvm.xml

• Satellite P750 114 - how to start using the remote control

  Hello

  Does anyone know how to start to use the remote that came with my makeup P750 114.
  When I press on simple volume keys + / doesn't seem to work.
  I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.

  Hello

  A remote control that is included with some models allows you to perofom certain functions.
  Using the remote control, you can
  -Navigate and control the media center window
  -Check the video or live tv display
  -Place the computer in and out of fashion "Eve".

  There is a button on the remote control.
  It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
  You will find options; do nothing, sleep, hibernate, shut down.

  Hope this helps

• Equium A200-15i: I can't use the touch pad - no response

  I can't use the touchpad in my equium A200-15i.
  When I press the button, there is no response at all.

  Please help me to solve it.
  I tried to uninstall the program and reinstalled, but the problem persists.

  Hello

  Have you checked if the touchpad is properly activated?

  Using the FN + F9 key combination, you can disable and enable the touchpad feature!
  Please check this function if you have not disabled the touchpad accidentally!

  Last but not least, I would recommend checking settings the touchpad mice control-> Advanced-> advanced settings panel.
  You will find different options that can be configured to use all available touchpad features.

  Best regards