I cannot see the devices and can not import the ringtone

Similar Questions

• The specified package was rejected by the device and can not be loaded

  Hello

  I develop an application, it works very well on my Simulator... but when I try to run it on the device, it gives me error

  "The specified module was rejected by the device and cannot be loaded"

  I use Blackberry JDE 5.0. Can you help me please? its really urgent.

  Thank you

  Gunjan

  I guess that the storm is running OS 4.7. In this case, you need to compile the application in any JDE<=4.7 .="" there="" is="" a="" general="" rule="" that="" the="" jde="" version="" should="" be="" less="" than="" or="" equal="" to="" the="" os="">

• OfficeJet 5740: Cannot print duplex automatically and can not connect wireless

  So, I recently bought a new laptop for academic purposes. Back in September, I bought the HP Officejet 5740 because it could print wireless and can print double sided also.

  Everything worked perfectly fine when I was using Windows 8. In microsoft office, that I could see the option to print double-sided and had no difficulty, printing or the connection to the wireless printer.

  Then, I upgraded my computer to windows 10. I downloaded the hp driver and tried to add the printer several times and did not get it to connect successfully. Moreover, I see more two-sided printing option. I have the option to print one, or to manually return the documents to make it double sided.

  I downloaded the driver installed the printer and uninstalled the printer a LOT, a LOT of time with nothing doesn't. Please help me. I really only print in powerpoint and word, so it is very important to have this ability.

  For the connectivity problem, I would say the Print and Scan doctor, you can download it from HP to http://www.hp.com/go/tools.

  For the duplex issue make sure the duplex module is selected.  Click on start, devices and printers, click with the right button on the Officejet 5740, select printer, device settings, both installable and set properties automatic duplexing on installed unit, apply, OK.

• Cannot access pc settings and can not unlock the taskbar? (Windows 8)

  This morning I turned on my pc and noticed that the lock screen had changed, so I logged in and then I realized all my apps on the home screen had been removed even those provided with windows 8, such as news and sports, even the tile Office had gone. I finally managed to get on the desktop and everything blew my taskbar, so I tried to unlock it, but whenever I did it automatically locked again. Then, I found refreshing the pc would be a good idea, but I can't even on the pc settings. I opened to the top of the sidebar, then click on change pc settings, but absolutely nothing happens, can someone please help soon!

  Hello

  Thanks for the reply.

  I appreciate your efforts to solve the problem.

  I suggest you to check if the problem occurs in a new user account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  If the problem does not exist in the new user account, you have damaged user profile. You can follow the procedure to resolve a corrupted profile.

  Copy old files to the new profile:

  a. go to C:\Users\Corrupted_Profile_Name\. The name of the profile will be the corrupted ProfileName.

  b. copyall files.

  c. Open Panel and the display of folder options uncheck Hide protected operating system files.

  d. navigate to C:\Users\Corrupted_Profile_Name and copy the Appdata folder.

  Note: Do not copy these three files. NtUser.dat, NtUser.ini, NtUser.log.

  e. navigateto C:\Users\New_Profile_Name\.

  f. Paste all files here.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

  When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

  I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

  It is a problem of carrier - I would like to talk with my carrier

  Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

• DeskJet F4580: new router cannot get connection and can not find the whole upward on macbook

  I had to get a new router as I have had problems with my fixed internet internet problems but now my printer does not work unless I connect with the usb cable, I have tried everything including the abolition of the printer, which now, I deleted the setting up of information out of my macbook and can not install the printer please help it worked very well with my other router...

  Hey @gingerjean1,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have replaced your router and are having trouble with your Deskjet F4580 of connection to the network. I can help you with that.

  As you use Macintosh 10.7 I recommend the use of a Windows PC to install the printer on and then to add to your wireless network. If this isn't a practical option there are a number of things we could try.

  Apple Software Update

  1. Click on your Apple icon and go to software updates.
  2. Install the available updates.
  3. Apple's HP printer driversdownload.

  If during the installation there is no wireless options then:

  1. Go to your Apple system and print and Scan preferences icon.
  2. Double-click your printer icon on the left side of this screen.
  3. In the pop-up window, click on settings, utility, and then click Open Printer Utility.
  4. In this new window, you must have a wireless tab along the top, that you can click.
  5. On the left side, we are looking for a wireless configuration wizard.
  6. Run the Wireless Setup Wizard to add the printer to your wireless network.
  7. Once the printer is connected, disconnect the USB cable to the back of the printer.
  8. Return to the Apple, system, print, and Scan preferences.
  9. Click on the button "+" at the bottom left.
  10. In this window, select your printer.
  11. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  12. Click on Add.
  13. Try to print.

  Ad-Hoc

  If the method above does not allow you to connect the printer wireless, then it can work.

  1. Perform a factory reset the printer. I will include guidance on how to do so shortly in a private message.
  2. Turn on the printer.
  3. Press the button on the front of the printer wireless.
  4. Wait for about a minute.
  5. On your Mac or another wireless device, you should see a network with a name similar to "HP Deskjet F4500 XX Print" listed. To connect to this network.
  6. Press and hold the scan button (the icon of the printer under the red x on the printer) for 10 seconds. When you release the printer should print a test wireless report.
  7. On the device you connected to the printer, open a web browser and type the IP address in the bar of address exactly as shown on the test report.
  8. You should have a network tab along the top of this window.
  9. On the left side, we are looking for a wireless configuration wizard.
  10. When you run that must connect the printer to your wireless network.
  11. Once the printer is connected, disconnect the USB cable to the back of the printer.
  12. If you have connected your Mac to the printer above and then reconnect the printer to your wireless network now.
  13. Return to the Apple, system, print, and Scan preferences.
  14. Click on the button "+" at the bottom left.
  15. In this window, select your printer.
  16. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  17. Click on Add.
  18. Try to print.

  If it allows you to connect your printer to your wireless network and then do other forum users know clicking on accept as Solution below my post. Even if you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore cannot see the bottom of the vertical pictures.  How can I get this problem to what it has always been - set of the workspace editing on

  My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore may not work on the bottom of the vertical photos.  How can I get that back to mount on display?

  Hi wassily.

  suggest you go menu window > workspace > reset Essentials

  and who needs to reset your workspace to the default.

  Kind regards

  Claes

• I've updated the cs6 camera raw and now cannot see the metadata of the camera I used to see and can't find it in photoshop itself.

  I updated the cs6 camera raw and now cannot see the metadata of the camera in the first I used to and do not at all see in photoshop.  This can be corrected?

  What operating system do you use?

  If your using a mac operating system

  http://helpx.Adobe.com/bridge/KB/ACR-84-bridge-CS6-metadata.html

• When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image

  When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?

  Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."

• Device, I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7

  I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7

  http://www.ARCHOS.com/support/support_tech/index.html?country=us&lang=en

• I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

  It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

  I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

  I tried to get various programs to recognize.  They cannot see the installed media.

  I uninstalled iTunes.

  Please do not give me the answer of cut-and - paste stock; It does not work.

  Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

  Thank you.

  Hello

  Well, if you have tried all the usual bugs try this:

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------

  Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
  continue.

  Reset.

  Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
  could be at stake.

  =====================================

  Here's the answer, just in case there is something you don't have, and I start up and down.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===========================================

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• updated to IOS 9.3 and can not get the screen acativation

  Updated for IOS 9.3 yesterday and can not get past activation screen

  There is a known issue with iOS 9.3 and there is still no specific treatment. The ideas below can help, or they may not. It has been a success among others and no simple way to resolve the situation.  You can judge if you want or you can just wait and see if it fixes itself. The problem is most likely on the end of Apple, which means it is not much end users can do until it is resolved.

  Some have suggested to go to icloud.com, sign in with your apple ID and remove your device from your cloud account, and then try to activate again.

  Others have suggested to simply try to restore the factory via iTunes on your computer settings.

  The restoration works for others once they go to iCloud.com and remove their device.

  Option 4 is just wait and see when Apple can issue a fix.

  You can connect to iCloud here

  https://www.iCloud.com/

  And here is a step by step on restoring your device if you want to try it.

  http://support.Apple.com/kb/HT1414