I couldn't connect to the perticular webdesite?

Similar Questions

• I couldn't connect to the internet by cable?

  I couldn't connect to the internet? If I set a static ip address, I can connect. But if I checked, get the IP autometicaly, I couldn't connect to the internet. I have a computer more on network all work very well and connect to the internet. only my system could not connect.

  Hello

   

  Welcome to the Microsoft community!

  You are able to connect to the network unless you assign the static ip address.

  To work with the issue, I suggest you follow the steps:

   

  Method 1:

  See the site:

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  Method 2:

  a. click on start, click on run

  b. type cmd and press enter

  c. now type ipconfig/release and press enter

  d. now, type ipconfig / renew and press enter

  Method 3: reset Internet (TCP/IP) Protocol

  See the site:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• As an administrator, I have removed the need for a password, but when I connect now, he always asks a password. I type in what it was and an error pops up stating that it couldn't connect because the password is incorrect

  recent changes to the system

  I see that nobody has yet responded. I looked at this post yesterday and could not understand what you were doing so did not so. I still don't know what you therefore cannot help you. Please provide a better description of your actions and the State of the computer now so I can help you.

  How to post in the Forums:

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question MS - MVP - Elephant Boy computers - Don ' t Panic!

• Internet Explorer does not work normally and I couldn't connect to the Internet.

  Original title: can I clean my computer and start from scratch

  my laptop is now a mess, that I feel from scratch how to stop files appering.

  You can restore your laptop to factory settings, but you will need to read the user guide to find out how because the procedure differs from a make and model to another.

  Good luck.

• Unable to connect to the client to site VPN

  Hello

  Suddenly this morning I couldn't connect to the VPN from my work. I did not update the operating system or any other application in my Mac. I checked with my VPN provider and all is well. I tried to connect to the VPN from another PC and the connection was successful.

  It of weird, can you help me on this?

  Thank you

  My Info:

  OS X El Capitan

  Version 10.11.6 (15-1004)

  Error log:

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: agreed to the takeover of vpn connection.

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec to connect to the server 50.57.56.150

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: connection.

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec Phase 1 started (initiated by me).

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: > > > > > status of phase change = Phase 1 began by us

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: no message must be encrypted, 0x14a1, side 0 status

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec to connect to the server 50.57.56.150

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: connection.

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec Phase 1 started (initiated by me).

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: > > > > > status of phase change = Phase 1 began by us

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: port 62465 anticipated, but 0

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: > > > > > status of phase change = Phase 1 began with a peer

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

  7 September 11:17:57 racoon Gerards-MacBook-Pro [680]: IPSec Phase 1 established (initiated by me).

  7 September 11:18:05 racoon Gerards-MacBook-Pro [680]!: jumped to retransmit the frags: frag_flags 1, r-> sendbuf-> l 136, max 1280

  7 September 11:18:05 racoon Gerards-MacBook-Pro [680]: retransmitted packet received from the 50.57.56.150 [500].

  7 September 11:18:05 racoon Gerards-MacBook-Pro [680]: the packet is retransmitted by 50.57.56.150 [500].

  7 September 11:18:13 racoon Gerards-MacBook-Pro [680]!: jumped to retransmit the frags: frag_flags 1, r-> sendbuf-> l 136, max 1280

  7 September 11:18:13 racoon Gerards-MacBook-Pro [680]: retransmitted packet received from the 50.57.56.150 [500].

  7 September 11:18:13 racoon Gerards-MacBook-Pro [680]: the packet is retransmitted by 50.57.56.150 [500].

  7 September 11:18:21 racoon Gerards-MacBook-Pro [680]!: jumped to retransmit the frags: frag_flags 1, r-> sendbuf-> l 136, max 1280

  7 September 11:18:21 racoon Gerards-MacBook-Pro [680]: retransmitted packet received from the 50.57.56.150 [500].

  7 September 11:18:21 racoon Gerards-MacBook-Pro [680]: the packet is retransmitted by 50.57.56.150 [500].

  7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: IPSec disconnection from the server 50.57.56.150

  7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: IKE Packet: forward the success. (Information message).

  7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

  7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: glob found no match for the path "/ var/run/racoon/*.conf".

  7 September 11:18:27 racoon Gerards-MacBook-Pro [680]: IPSec disconnection from the server 50.57.56.150

  September 7 11:18:27 Gerards-MacBook-Pro UserNotificationCenter [682]: * ATTENTION: the method in the class userSpaceScaleFactor NSWindow is discouraged on 10.7 and later versions. It should not be used in new applications. Use convertRectToBacking: instead.

  7 September 11:18:29 racoon Gerards-MacBook-Pro [680]: connection.

  7 September 11:18:29 racoon Gerards-MacBook-Pro [680]: unknown information exchange has received.

  Establish a virtual private network connection-

• Unable to connect to the server

  I have an officejet pro 8600plus. When I bought it, I have activated ePrint and registered my printer, but never used the feature. Since then, I updated from XP to windows 8.1, changed a router and connected the printer through a series of switches on a wired ethernet connection. A few days ago, I tried to use e print but received a message that I couldn't connect to the server.

  my printer prints fine, connects to each computer on my home network, I just upgraded the firmware with success to [personal information deleted]
  and yet, for more than three days, unable to connect to the server. I even deleted my account eprint printer, after changing his email successfully, but now I can not add new, I can't get the code because I can't activate the web plus services. I can scan from the printer to files network and all, but can't seem to activate eprint.

  can anyone help?

  Thank you

  Gill

  Hi the gills.

  Welcome to the HP Support forums.  I think since upgrade to 8.1 Windows and change your printer router cannot connect to web services to get the job of ePrint feature.

  Please define Manual of the printer an IP address manually and DNS servers. I've included a link to another post, I did it with the stages (including screenshots) how to do it.

• Satellite A105 - unable to connect to the wireless router more

  I had the success of connection to a router Wireless Linksys for the last few months. Today, that I couldn't connect to the Linksys still another. A few times I have to connect to the Linksys router, but I got a weak signal so I would be disconnected. The green bars on the router Linksys under available networks are all solid green full bars, but I can't? t connect.

  To do or check to login once more?
  Thank you

  HM, you will need to do some research! What was the last you´ve installed applications? Installed new drivers/tools/software on your computer?
  If not you already installed the latest drivers for the chip wireless for your laptop? If not already done, then try it and Don t forget to update BIOS. :)

  If anything brought success then just to give a few comments. :)

  Welcome them

• KB963027 update won't let me connect to the internet.

  Genuine windows vista hm. Premium (32 bit) serv. PK. 1. my pc auto updates every day, after the recent updates, I couldn't connect to the internet. I narrowed down it to KB963027. After that I deleted the update and restarting, I could once again connect to the internet. Should I really this update? Y at - it a known workaround for this problem? Because I use auto update, is there a way to block this particular update if there is no solution? Thank you.

  Hello

  see if this post from my colleague MVP Robear Dyer helps:
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/54f957e4c3a7d04a?hl=en Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• HP ENVY laptop model m7-j020 d: unable to connect to the Internet

  I have a HP ENVY 8.1 Windows running.  No problem until a few days ago, when I couldn't connect to the internet (no e-mail link or a browser).

  Wireless and ethernet connections seem to work. I can connect to the internet via another PC, smart phones, etc.

  E-mail started acting erractically. I tried to restart the computer, and then he started to install updates.  Not sure if she did because it does not connect to the internet.

  Based on the suggestions of another post, I tried: flushing the DNS, reset the battery TCO/IP and resetting the catalog.

  Restart the PC without installation updates has not improved the situation.

  Any help would be greatly appreciated.

  flynkites

  Hello @flynkites,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you are unable to connect to the Internet on your laptop, and I'd be happy to help you in this case!

  Since you've already tried the DNS of hot flashes, to reset the TCP/IP stack and reset the catalog, I advise you to follow the steps described in this document on the resolution of problems in Internet Explorer (Windows 8), as well as resolve and prevent viruses on your computer (Windows 8). This should help you to access your browser and e-mail on your desktop.

  If the problem persists after completing all the steps in the above resources, please contact our technical support by clicking on the link below to get help from your region number.

  www.HP.com/contacthp/

  I hope this helps!

  Concerning

• Could not connect to the internet via a USB Modem

  Could not connect to the internet via a USB Modem from my Nokia 6275 CDMA phone.

  Windows vista detects my phone connected via Nokia PC Suite via USB cable, but I couldn't connect to the internet using my phone as a USB modem dial. However, I am connected to the internet through the same dial-up access when I use bluetooth to connect to my phone as a modem. Please give me an emergency solution. I'm using windows vista 32-bit edition. It's windows vista Home premium.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  And contact the technical support of Nokia: http://www.nokia.com.au/get-support-and-software/download-software#.

  See you soon.

  Mick Murphy - Microsoft partner

• physical connection to the LAN address all zeros...

  Hi, I connect to the internet using the wireless at home, but at work, I use a wired connection.  I created this two weeks ago on my laptop (Vista) and it worked very well.  Today at work, I couldn't connect to the server and found that the physical address for my wired connection is all zeros.  Talked to the it guy at work and said he stressed the "zeros" for me.  Spoke to the hp in this regard customer service and they were not so useful.  any ideas?  Please let me know if you have had a similar problem and how it is resolved.  Thank you!

  Hello

  Try a system restore before what happened:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

• Windows could not connect to the system event notification service service.

  Hello

  For the moment, I have a problem as in the title. Whenever I have Windows startup, a message box appears to tell me that it couldn't connect to the system event notification service service. I also lost my Aero theme too, they was disabled and cannot be enabled. I checked all the services, and they work fine. I tried "'winsock reset", "sfc/scannow" but nothing doesn't change.

  BTW, here is my journal CBS . I use Nod32 Antivirus.

  Sincerely,

  Quan Nguyen T.A.

  The WAT update seems to have been falsified.

  The installed product key is a MSDN one which was broadcast all over the internet.

  https://www.Google.com/search?q=2CGXT-3BQDX-DG8BM

  The installation is a counterfeit.

  You must reformat and reinstall using authentic materials and key.

• Unable to connect to the web.

  I have an Inspiron One 2305. Yesterday morning, everything was fine. Before noon I couldn't connect to the web. The network connection shows that I am connected. I always get an error "unable to connect to the page. I ran anti-virus and malware. Still nothing. Do a system restore I can connect on a single page. Try to leave this page and I get the same error. Can someone give me an idea?

  At this point you can repair or reinstall Win 7. Make sure that all of your personal files are stored on a medium firstexternally.

  To do a repair, you will need your reinstall Dell Win 7 drive. Start with a hard disk check

  • Click Start > run
  • Type: chkdsk c: /f
  • Click OK
  • Accept offer to run chkdsk at the next startup, and then restart. CHKDSK runs before Windows loads. Be patient as this can take some time, depending on the size of your hard drive.

  Unlikely that chkdsk will solve the network problem, but check it anyway...

  Then run a check of Windows system (CFS) files:

  • Click Start > run
  • Type: sfc/scannow
  • Click OK
  • Insert the Dell Windows reinstallation disc, if/when requested
  • Restart when done
  • Check again networking

  If this does not help, make sure that your files are backed up! Restart, and then press F8 before Windows loads. Look for the option of repair that may be on an advanced options menu. Follow the prompts. See if that solves network problems. And don't forget to visit the Windows Update site and reinstall all updates that are missing after the repair.

• Unable to connect to the external network

  I don't have to VLAN configuration in my network 254 IP addresses, I can't create a VLAN now as almost all of the IP addresses are assigned.

  I'm trying to make the point of Contact with 30 remaining IPs. I created an external network without ID(I do not have VLAN) VLAN, I couldn't connect to the outside world. Can I create an external network without creating a VLAN in the switch?

  Thank you

  Prasad

  Then just create a net external portgroup with no tag VLAN and create VCDNI network pool and leave the field VLAN empty when it is created