I deleted a confidentiality in Thunderbird. I find back? (and replace)?

Similar Questions

• How to find "exposing" and replace by "thin space exhibitor.

  I have several hundred exhibitors who refer to the reference manual (which means, I have not used the system of reference provided by CS4). The notes are referenced by numbered exhibitors. i.e. Lord Haw Haw1 (except the '1' in my document is an exponent, unlike here).

  The difficulty is: spell checker flags all words with an exponent. that is, he thinks that "Haw1" is misspelled, and as far as I know, there is no way to tell spellcheck not mark words with attached exhibitors.

  One way to overcome this problem is to add "Haw1" (and several hundreds of others) of my user dictionary, but it's not very elegant. A second solution is to find and replace all the exhibitors. I can find exhibitors OK, but what I want to do is to replace the found Exhibitor (let's say it is 123) with 'thin space 123 '. In this way, I have a space between "1" and "Haw". Result: it is virtually the same as before, but check the spelling does not mark the combination as flayed.

  Question: Is it possible to ask CS4 to find an exhibitor and then have replace all what she was (say found 123) with "thin-space 123? Seems a command, but maybe it's possible.

  Thanks in advance for your suggestions.

  You will need to

  To find:
  (\d+)

  REPLACE:

  ~<$1 (that's="" tilde="" less="" than="" dollar="" sign="">

  Find Format

  Exhibitor

  Format change

  (leave empty)

• Find and replace

  Hi all

  One of my colleague working on a program with more than 100 cases of the same enum (without type def as a constant knot, of control and property).  It must update the enum (surprise), so he needs to make the change on all the enum 100 +.  I showed him how to do a type-def, and he could replace the 100 + with new enum type FED.  It's a lot of work manually, so I tried to use search and replace, but it won't let me choose the new enum type-def we want to replace the enum 100 + with.  If I do find and replace, I can exclude the property node?  If I, the field node would get linke for the new enum?

  What is the best way to accomplish this task?

  jyang72211 wrote:

  1. I was able to find all the constant enum and replace them with something else.  Is it true that I can replace only with similar data type?  For example, I can't replace a constant enum with an add function.  I tried to change the enum to the ring to digital and numeric Enum.  They worked, but sometimes there is a glitch, where I have to find me and replace twice to make it work.  Have you seen this before?

  Yes, there are replacements that don't work because they are not simply doesn't make sense.

  2. I was able to easily find the enum constant, but for controls of the enum, I needed to go under others-> terminal façade.  I found the controls, but there is a slash sign beside him.  I assumed that meant cannot be operated.  I tried to replace the enum with some other control, and I can't.  How do you do search and replace on a control of enum (not constant).

  The search and replace has some limitations, and you met a. You can do what you want to do by the script. See attached example, which replaces the controls that have a label that starts with 'cc' with the typedef. The criteria for which controls replace yours. I just chose that according the example VI that you have provided. Modify if needed.

• A Script to find and replace the layer names

  Is there scripts to find and replace the names of layers?

  There is an excellent script available for Photoshop that allows you not only to replace words in layer names, but also insert words as prefixes, Suffixes and sequential numbers.

  The version of the illustrator of this script allows only sequential numbering: it does not offer search and replace words.

  Ideally, it would be great if there were something that could find multiple and replaces in a go:

  (for example

  You have layers like this car, the dog, the bat

  You enter: because (Option1), dog (Option2), Bat (Option3)

  Your layers become then: option 1, option 2, Option3).

  )

  Big_SmiLe, which is a very good start! Step 1 of learning how to Script is indeed, by adjusting an existing simple script to make things more complicated. (And usually then "break something", which is also a necessary part of the process.)

  You are right your comment, it comes to repetitive things. For one or two different articles that wouldn't be a problem, but in the longer lists you are soon lost.

  As usual to work with lists of search - replace is to build a table:

  var layernames = [
  [ 'FHairBowlBoy *Hair', 'Hairboy1' ],
  [ 'FHairCurlyafroBoy *Hair', 'Hairboy2' ],
  [ 'FHairSpikyBoy *Hair', 'Hairboy3' ],
  ];
  

  The general idea is to loop through all the names, check if the current layer name is "layernames [i] [0]" (the left column) and if so, rename it "layernames [i] [1]" (the right column). If you know how to write a loop in Javascript, then you can implement this immediately.

  However...

  A more advanced method to do this didn't need even loop on all layernames - instead you can immediately 'get' the correct name by layer! It's magic! Almost!

  The trick is to use a Javascript object rather than a table. JavaScript objects are nothing special; "Layers" of Illustrator are an array of objects, and each object 'sex' has a 'name' property, which you can read and set the value. What I do here, is to create a new object, where the part 'name' is the name of the original layer and its value is the name of the new layer. All you need to check each layer is if there is a "object.originalLayerName" property and if so, assign its value to this layer name.

  It looks a bit like the table above, except that (1) you use {.} instead of [..] to create an object and (2) you add pairs "name: value" instead of 'value' only (in fact, the 'name' of a value in a table is simply her number).

  So here's what it looks like:

  // JavaScript Document
  var doc = app.activeDocument;
  // name indexed object
  var layernames = {
   'FHairBowlBoy *Hair':'Hairboy1',
   'FHairCurlyafroBoy *Hair':'Hairboy2',
   'FHairSpikyBoy *Hair':'Hairboy3'
  };
  // loop through all layers
  for (var i = 0; i < doc.layers.length; i++)
  {
   //Set up Variable to access layer name
   var currentLayer = app.activeDocument.layers[i];
   if (layernames[currentLayer.name])
   {
    currentLayer.name = layernames[currentLayer.name];
   }
  }
  

  Enjoy!

• Dreamweaver CS6 'Find and replace' does not

  Since I started working in DW CS6, I noticed that the search and replace feature does not completely work.

  For example if I select a block of code, and then open search and replace, tell him to find "< br / >" and replace it with "< /li >" it only replaces the first instance. The rest of the < br / > of are still < br / > ' s.

  What is happening to someone else? I might have to go back to CS5.

  for all those who want the link:

  http://www.Adobe.com/support/Dreamweaver/downloads_updaters.html

• Find and replace using wildcards

  I have inserted the contents of table using Insert/Table/Insert tabular data objects in DWCS3 and you want to remove the table insert unwanted code.

  Example:

  < td width =156 valign = top style = "width: 117.0pt;" border-top: none; border-left:
  None; border-bottom: solid windowtext 1.0pt; border-right: solid windowtext 1.0pt;
  MSO-border-top-alt: solid windowtext .5pt; MSO-border-left-alt: solid windowtext .5pt;
  MSO-border-alt: solid windowtext .5pt; background: #FF8A50; padding: 0 cm 0 cm 5.4pt 5.4pt' > < class = MsoNormal p > < span style ='mso-bookmark: CurrentPosition' > < span
  style = "size are: 10.0pt;" make family:Arial'>

  The text between "width" and "Arial" "" varies but these two words start and end are the same in each case be replaced - how can I find and replace using a regex wildcard?  Did some research on the web, but not yet to come through response.  I thought it would be simple and I hope that it is, and I'm just having a shock. Is this something like Find: "< td [^" "] * > and replace it with:"< td > "?  Am I close?

  I would be grateful to anyone who helps and thank you in advance for your time.

  You may be able to resolve this issue with the commands > Clean Up Word HTML.

  However, the following regular expression should also do what you are looking for (do a first backup). Put this in the search field:

  ()
  

  Put this in the field replace:

  $1$2
  

  Select "use regular expression.

• How to delete an account in thunderbird

  I want to delete an account in Thunderbird, but cannot find a way to do it.
  How should I do?

  Open the account settings

  Tools | Account settings| < select account >

  Or right click on the offending account, select settings.

  Or click on the account. In the default configuration, you will see a page called "Central account", which has an option of parameters.

  Account settings open in a new window. In the left pane where the accounts are listed, you will see a button labeled account Actions and this button gives a menu with an option to remove account.

  Some people click the remove account option and seem surprised that the account is deleted, as well as all the messages inside. If the messages are important and you want to keep them, move them elsewhere first.

• When I delete a message in Thunderbird, it is not deleted from my POP3 server.

  I have account as"email on the server" settings and "until I have delete ' both checked. When I delete the email in Thunderbird version 24.4.0, enamel not get deleted on the pop server.

  If I create a filter and say "delete server" any e-mail that has a STAR status. Emails get deleted from the server when I run the filter messages.

  I don't think I should have to run a filter whenever I want to delete emails from the POP3 server.

  I do something wrong... any ideas?

  I found the answer on another forum by Tom Wijsman:

     Go to Options -> Advanced -> Config Editor.
  

     Find the Name mail.pop3.deleteFromServerOnMove
  

     Set it to True.
  

     True: Delete the copy of the message on the POP3 server if you move or delete the message.
  

     False(default): Only delete the copy of the message on the POP3 server if you delete the message.
  

  That of it, restart Thunderbird. You must press "Get Mail" whenever you want to synchronize with the mail server, so that you can to ensure that the messages in the application is in synchronization with the e-mail server.

  What follows is to highlight to perform the synchronization with the server. You will not see your message server after the initial download to Get Mail (new downloaded messages). Once you process your Inbox in Thunderbird to delete/move a new message, and then make another mail to get, which will remove messages previously downloaded on the server (phase).

  Note: If you have some old messages in your mailbox Thunderbird, they will not be deleted from the server. Delete them manually from the server. Therefore, all new messages you download, then treat (delete/move) and then synchronize up redoing Get Mail will BE deleted.
  share | improve this answer

  Tom Wijsman

• Deleted the office mistakenly Thunderbird icon; How do I put back it?

  While cleaning my mouse wheel, he was moving on my screentop and deleted my icon for Thunderbird. How to restore the icon on my desktop? My Thunderbird works fine, I just need to put the icon on the screen so I don't have to click to get to my email. Thank you.

  Check your trash. If there you can right click on "restore".
  Otherwise, you may need to create a new shortcut. Easy if you are familiar with File Explorer Windows 10. Are you?

• Cannot delete messages on mozilla thunderbird on Linux Mint

  I can't delete messages on mozilla thunderbird on Linux Mint, delete no options works, so for me I found a temporal solution, which is to create a new folder inside the Inbox and then move mail in this folder, and then delete the folder. However, I think that this is not a good solution to delete emails, so I want an update, if possible, for linux mint which solves this problem.

  Greetings,
  Fragmentado

  If the Deleted foldre is full, he would accept no more deleted mail
  Is there a "Deleted" folder in your folder pane?
  If so, right-click on the deleted folder and select 'Empty Deleted' then right click again and select "Compact".

  new attempt to delete.

  If this does not work... try this:
  Remove the current file from the Recycle Bin, you will lose all the emails in the deleted /Trash folder.
  Make hidden files visible:

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  In thunderbird

  • Help > troubleshooting information
  • Click on the view file"" button.
  • It will open a new window showing your profile folder.
  • Close thunderbird now.
  • Click the mail folder
  • Click the e-mail account name
  • Search for files "Trash" and "Trask.msf".
  • Delete these files.
  • Restart Thunderbird

  A new trash folder must be created.

• I removed my Thunderbird e-mail account and lost some old messages in folders. Can I recover these files/messages?

  I use Thunderbird on my PC in Windows 8. I had some e-mail questions so I deleted my account from Thunderbird and then re - he added. In this process, some files I had put in place in Tbird with saved messages have disappeared. Is it possible to recover? They linger somewhere on my computer? Thanks for any help!

  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Recover_Deleted_Account

• Share button in the Finder, Safari and also does not

  I have been using the release of El Capitan for a while now, but recently the 'Action' button in the Finder, Safari and other applications when you press to share for example at the post office, leads the application unresponsive, ends up having to be forced to leave.

  Can someone help me with what could be the cause?

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Open

  the contextual menu.* should open a case with a funny name "records".

  Inside 'files' are several subfolders, each with a two-character name. Drag all subfolders except named "zz" to the trash. Do not delete the subfolder named "zz". You will be asked for your administrator credentials.

  Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• Find and replace it with an invalid Code in Dreamweaver CC 2015

  I have a HTML file of 800 line with about 200 H3 tags not closed I want to remove. I try to use search / replace, but it doesn't seem to be able to find non closed tags.

  In the excerpt below, I want to remove or delete the H3 tag:

  …

  < /ul >

  < /li >

  < h3 class = "best_SubCategory_Title" id = "455474Title" >

  Best sedan

  < ul class = "ssMatchup_Entries" id = "Matchup455474Entries" >

  < /Li > < li > agreement

  Camry < li > < /li >

  Mazda 6 < /li > < li >

  Passat < li > < /li >

  < /ul >

  …

  I tried different ways, but Dreamweaver search / replace engine can't not find invalid or cavities not blocked tags?

  Here are a few things that I tried, and as you can see, Dreamweaver cannot find the H3 tag:

  

  

  If I close it manually one of the H3 tags, and then find and replace can find. I think I can use regular expressions to do this, but I need to understand this too, if that's the only way.

  What do you think? Any idea on how to get rid of 200 H3 tags not closed? Perhaps another application?

  Answered my own question, here is the solution:

  For some reason, Dreamweaver cannot find and replace invalid code, or at least it is not easy to do. My problem was that I had a H3 tag not closed and would not replace it. I had to first close the H3 tag, and then I could replace it.

  I did a find and replace the one sought a ">" followed by a lot of white space, like this:

  

  As my license to close the H3 tag, then I could easily find and replace all now closed H3 tags, like this: