I dropped my iphone 4s in the water, but it still works?
I actually dropped my phone in the water before, but it worked fine afterwards, despite the fact that I have did nothing. I went in the bathroom again today and it seemed to work very well and I don't think anything of it. All sounds have worked, the screen and the brightness seemed fine, and all the buttons work. My wifi worked not briefly, but the wifi in my house is a little wobbly and I turned it works and it was fine. I used it for more than two hours later and it was fine, until I noticed water under the screen. I immediately looked up what I must do, turned my phone off, took out the sim card and began painstakingly dry with a hair dryer (I don't have any rice or silica gel), paying special attention to the battery, but also an opening in the phone. The hair dryer was weak, I kept it at a distance, and I followed it constantly for that phone don't fire no. I skipped, it regularly for about 20-30 minutes, turned to the monitor, and the brand of water has been growing (its in the half top of the screen) and it seems to have disappeared, but I wonder if the water could simply scattered. I have it turn on and off several times and it always seems fine.
I need to know if you think that the phone will survive. Also, I can't afford a new phone or to get it fixed now, so if you have advice that can be performed by an amateur at home, then I'd love to hear them. Thank you.
I think that your phone will probably survive if you used a hair dryer on low, do at least 1 iCloud backup every week, but if you get a new phone, I'm sorry.
Tags: iPhone
Similar Questions
-
help dropped iPhone 6s in the water
Accidentally, I dropped my iPhone 6 s in water. Could recover immediately and put in the rice. It has been sitting there for two nights. Phone works for most, but has lines on the screen and no sound. Now I can not put the charger in the slot. Anyone have any ideas?
Thank you.
Buy one off replacement under warranty.
-
I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him an Apple store. However, the phone doesn't seem to work. Also I don't have apple care more.
You will pay full price for a new iPhone.
Apple Care does not damage water still > liquid for iPhone or iPod is not covered by the warranty - Apple support
-
My Iwatch is synchronized with an Iphone which contained the water damage, and I had to replace my phone. Can I recover my photos of my Iwatch?
Hello
No - you can't retrieve pictures directly from your watch. However, you can add your replacement iPhone.
Apple Watch stores the photos in an album photo sync on your iPhone. By default, it's on your album of Favorites (the photos that you have marked as Favorites). The photos may not be synchronized / extra back to your new iPhone to your watch - synchronization only works on the other hand.
To keep the same pictures on your watch once it is paired with your replacement iPhone, you must add these same photos to the iPhone. You may be able to do this by restoring a recent backup of your iPhone:
- Restore your device from an iCloud or iTunes backup - Apple Support
Once the pictures are on your iPhone, select the album to synchronize with your watch:
-On your iPhone, in the application of Eve, go to: My Watch (low left tab) > Photos > synced Album > selects an album > allow them to synchronize after changing the albums.
-
I bought and downloaded an image on my desktop, but the water mark is still there. How can I get rid of him?
Follow the steps in these screenshots: I bought a stock image and I can't seem to upload the image under a license without the watermark? Please help
-
The screen, Touch screen still works, how?
It happened last night. The last time the display worked I started a playlist for my shower. I adjusted the volume to once or twice without turning on the screen, and after drying off the music by removing the speaker again Jack without turning on the screen. The aircraft then went into the pocket of my shirt and I ate dinner and watched a movie, but when I tried to do a little surfing before bed the display does not illuminate. I saw him light up the buttons, but take a few seconds to display when the CPU is busy so I waited, nothing happened. I removed the battery and tried again, nothing on the screen. But then I discovered that the touch sensor is still working, I could slide to unlock and turn off in the standard mode just blind. I looked at all the stickers water they are both white and Red bright x
While writing this question (I'm sure many of you already know this fact), I discovered that my camera screen is actually three separate functional parts. The capacitive touch screen, always in activity on my camera, the LCD also still in operation and image generator the Led illumination source that lack of a more precise description is grilled.
So my question is how could happen, it's hardware or software, and what are my options?
This seems definitely related material for me. Is the phone still under warranty, by chance? Motorola has a repair service that will fix it for free, if it is still under warranty. If it isn't under warranty more there will be a flat fee of $110 for the repairs, which was the price for the last time I looked anyway.
Click on the link above if you want to see Motorola repair site. I hope this helps.
-
The game I play is Combat arms, I gave it through the firewall but I still have to allow him, and in the end, the combat arms stops responding and closes due to the DEP (Data Execution Prevention). I leave on the DEP list. Please help me.
Hi Brainiac107,
1 when was the last time it was working fine?
2. did you of recent changes on the computer?
Method 1
Check and make sure that you have followed the method to allow the game through the protection of execution of data (DEP) below.
"" "" "a) departure ' Run ' sysdm.cpl ' click 'Advance' tab" now click on 'Settings' running ' then click on the "Data Execution Prevention" tab
(b) now click on the "turn on DEP for all programs and Services except those I select:
(c) then click add and go to and select C:\Nexon\Combat Arms\engine.exe
(d) now, click Ok then apply.
(e) restart the computer.
Change Data Execution Prevention settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings
Change Data Execution Prevention settings
http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings
Method 2
If the previous step fails, then try to run the game with administrator privileges and check if it works.
(a) right to the shortcut from the game or if you try to install the game, right click on the game setup.
(b) click on run as administrator.
Method 3
If you're still having problems with the game then post your request in the forums of game seller.
http://Forum.NEXON.NET/CombatArms/forums/8624/ShowForum.aspx?PageIndex=2&SB=0&d=1&DF=11
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I need to reinstall xp on my nx6125
I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker
Hello
Yes, you can use this COST to install Windows XP. However, you must have Windows XP.If you face any problem regarding the installation of Windows XP.You can contact our Windows activation service.Here is the link: -
files and settings transfer
using files and Settings Transfer vista ultimate Premium the Chinese lanquage pack still worksNo. does not work in the Home Premium edition.
from: http://windows.microsoft.com/en-US/windows-vista/How-do-I-get-additional-language-files
Language packs require a license and are only available with Windows Vista Ultimate and Windows Vista Enterprise.
-
HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work
HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work
If HP is unable to repair it, nobody else can either. Buy yourself a cheap Canon scanner if they cannot make it work.
-
Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?
It sets obtained :-) Sorry for the delay
Thank you very much! has worked perfectly!
-
I have a Gmail, but you deleted all the contacts, but they still appear on my App people please help
Separated from the <> https://answers.microsoft.com/en-us/windows/forum/windows_8-ecoms/people-app-in-windows-8-pro-not-syncing-gmail/90440534-795b-406c-a6ed-f77b9a40478b >
Check to http://people.live.com instead (the online source of the people application) and see if she is still synchronized. Also, it may take a day, because synchronization of google working on an interval timer.
-
6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start? What should do?
My computer is a PC with Windows 10.
Everything worked well before the Update Adobe Lightroom 6.
The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?I apologize for the inconvenience.
Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.
We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.
Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows
-
How do I resize BOTH the frame AND the image?
I just started using CC online I usually use the command and shift (to keep the proportions), but NO keys work now!
It's frustrating to have to resize the image and frame separately. The SHIFT key does not keep the proportions more!
The shortcuts have changed?
I'm on Macbook Pro - Yosemite.
Please help me! Thank you!
In the panel control is a check box resize the content with the framework.
-
I pay for the creative cloud for the Photo, but applications still saying, that I have to buy, and the time of the trial is over
Iron,
Please see this link:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
Guinot
Maybe you are looking for
-
Problem with 9.3.3
Downloaded ios 9.3.3, now cannot call or receive calls.
-
L830 satellite - built-in microphone and webcam not working
Computer: Toshiba Satellite L830-10NPlatform: Windows 7 Hi guys,.I have problems with my integraed microphone and webcam. All of a sudden out of nowhere, it wouldn't work. I tried to restore the system to go to a previous point where I worked, I inst
-
PDF Exaprom cell format problem
Hi everyone, I am currently using Exaprom to generate a PDF report for some test equipment. The report should be formatted in a particular way (I have attached a picture of the format to this message). The table has a thick line that separates data f
-
KB2434419-Live Essentials update
Have not installed. The message said I had another Windows 7 platform. Does make sense?
-
My husband has Windows XP, it should have relied on a button and this screen once it arrives at the opening of session turns on the side, how do I get that back to normal please?