The screen, Touch screen still works, how?
It happened last night. The last time the display worked I started a playlist for my shower. I adjusted the volume to once or twice without turning on the screen, and after drying off the music by removing the speaker again Jack without turning on the screen. The aircraft then went into the pocket of my shirt and I ate dinner and watched a movie, but when I tried to do a little surfing before bed the display does not illuminate. I saw him light up the buttons, but take a few seconds to display when the CPU is busy so I waited, nothing happened. I removed the battery and tried again, nothing on the screen. But then I discovered that the touch sensor is still working, I could slide to unlock and turn off in the standard mode just blind. I looked at all the stickers water they are both white and Red bright x
While writing this question (I'm sure many of you already know this fact), I discovered that my camera screen is actually three separate functional parts. The capacitive touch screen, always in activity on my camera, the LCD also still in operation and image generator the Led illumination source that lack of a more precise description is grilled.
So my question is how could happen, it's hardware or software, and what are my options?
This seems definitely related material for me. Is the phone still under warranty, by chance? Motorola has a repair service that will fix it for free, if it is still under warranty. If it isn't under warranty more there will be a flat fee of $110 for the repairs, which was the price for the last time I looked anyway.
Click on the link above if you want to see Motorola repair site. I hope this helps.
Tags: Motorola Phones
Similar Questions
-
I have an external display and close my macbook, and still be able to look at the screen and work. Currently when I close the screen closed macbook.
You must ensure that you have an external trackpad and a connected external mouse/trackpad.
https://support.Apple.com/en-us/HT201834
http://lmgtfy.com/?q=close+MacBook+lid+while+using+external+monitor
-
hen I list all PROGRAMS menu START, I see the third column, because it is off the screen. So, how can I scroll to the third column, no scroll bar is present.
Hello
You did it changes on your computer before this problem?
You try to increase the resolution of the screen and check if the problem persists.
For more information, see these links: to change your screen resolution
Change the resolution of your monitor
Hope the helps of information.
Please post back and we do know. -
I wipe my laptop and keyboard mouse with a paper towel and the screen turned sideways, how I recover the right way?
Hi ken1957,
Try pressing Ctrl +
or to rotate the screen. -
My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?
My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?
Press Ctrl & Alt keys and use the arrows to rotate back.
According to the graphics card on your computer, these can be alternatives.
Right click on the desktop | Graphics options | Rotation.
Right click on the desktop | Screen resolution | Orientation.
-
files and settings transfer
using files and Settings Transfer vista ultimate Premium the Chinese lanquage pack still worksNo. does not work in the Home Premium edition.
from: http://windows.microsoft.com/en-US/windows-vista/How-do-I-get-additional-language-files
Language packs require a license and are only available with Windows Vista Ultimate and Windows Vista Enterprise.
-
I have a Hp and the micro build does not work how to fix this?
Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?
Hello
Check with HP, their drivers support and documentation online and ask in the forums about known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/========
It's probably the pilots who are responsible and who may not really be later or they need to be
re-installed anyway. The best way is to manually review using the methods below.References to Vista also apply to Windows 7.
Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
Audio definition (this is an example and you can have an other name/maker).Write the description and the model double click on it - tab drivers - write down
Version. Now click on update drivers who cannot do anything as MS is far behind certifying
drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
stack.You can have the default windows or a former certified pilot and it's all or part of the
issue.Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
where you put - right-click on Reboot - RUN AS ADMIN-Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
and then install the latest version. Restart and check after each test, not
rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
installed shows upward on the tab of the driver.
Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
operating mode. Download - SAVE - go to where you put them - click on - RUN AS
ADMIN - RebootLook at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check see the
Disconnected devices and show disabled devices - check your micro - highlight
then on lower right properties. Make sure that the appropriate injector is selected and check
other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDTips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsThe volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
in Windows XP (or Vista)
http://support.Microsoft.com/kb/973446I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work
HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work
If HP is unable to repair it, nobody else can either. Buy yourself a cheap Canon scanner if they cannot make it work.
-
my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work. I can't stop the iPod. How can I fix it?
Hi, lesliefromhowell!
Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!
Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.
You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:
iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)
To reset your iPod, follow these steps:
- Slide the Hold switch to the locked position and then come back!
- Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.
If you can always reset your iPod, follow these steps:
- Connect your iPod to a power adapter and plug the adapter into a power outlet.
You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep. - Try resetting your iPod again.
Good listening!
-
Satellite Pro P100 can not get the screen to work again
If someone could point me in the right direction, I would be very grateful!
I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.
To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.
I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?
TIA to all who can help you!
-Laurence
I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
You should change in display properties (right click on desktop-> properties)Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor
You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!
-
my image of the screen is big how can I make it smaller
My screen is the major newspaper on what it is because of this, how can I fix this need help I tried everything what
Hello
You can still use the ENTER key to OK, do not click OK with the mouse cursor.
There are a few things you can try:
Change the resolution of the screen;
http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
If that fixed it, go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.
Then try to change the screen resolution.
Or do a system restore to before that happened.
http://bertk.MVPs.org/html/restoresysv.html
See you soon.
-
The screen record works, but get the error dialog box
Running Windows 7 Home Premium 64-bit.
I set my screen saver to run a show of my own folder of Photos. Worked well. Then, I moved my photos on an external hard drive. Reset my screen saver so that it points to the new location of the files.
Now, the screen saver is used as intended (straight length of time, the images are brewing, etc..) BUT I also have a dialog box that is displayed at the top as follows: the title bar of the dialog box is: Photo Screensaver.scr No. Disk.
The message in the dialog box is: there is no disc in the drive. Insert a disk in drive \Device\Harddisk1\DR1Here is a link to a picture of the dialog box if that helps.
How can I remove this dialog of gaffe?
Thanks for your help!
Hi livelife0124,
You can get this error message when you have a player that is removable, configured as drive C letter or when there is actually no removable disk that is not true in your case.
To resolve this problem, you can change the assignment of drive letter for the removable drive to one letter other than C.
Go to the link below to change the drive letter of a drive in Windows 7.
http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter
Hope this information helps
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
In older versions of Firefox, there was a small rectangular window at the bottom right of the screen which got progressively filled with green squares, that your last order has been processed. This allowed you to know that the computer had received the order and close about how it would carry out the requested task. No such window does appear in Firefox 4. That has been omitted or what I have to do something to get it back?
Click on View - Toolbars - then the module Bar, and your progress bar will be there.
-
How to get the screen back to how it should be as at the present time, it is on the side
Hello
Can your hel [, the screen of my laptop is not how it should be and is now on the side as a result of a slip of the hand and a bad button, but we do not know which key it is.
You can advice how to get on the screen back to normal.
Kind regards
Anthony Lawson
Hello
Try holding the CTRL and Alt keys, then press the arrow pointing upwards.
Kind regards
DP - K
-
My colors to the screen have changed - how can I change them back?
My child was able to change the color of the screen on my Dell desktop computer. When I go to Word, the screen is black and the letters are white. I need to redefine white with black letters. Can someone help me with this problem?
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you have a query.
I would like to know some information.
Are you facing this problem with Word?
I suggest to refer to the Microsoft Articles help below and try the steps.
http://Windows.Microsoft.com/en-GB/Windows-8/get-best-display-monitor
http://Windows.Microsoft.com/en-us/Windows-8/personalize-PC-Tutorial
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
Maybe you are looking for
-
Change your Podcast Description and Image
I've been podcasting for only less than a year. The show has grown and evolved, and I really want to update the description and image to better reflect and explain the show. The current description is super super short. I was told to change the descr
-
Satellite C650D-007 starts with a blank white screen
Hello world I need emergency aid, 3 weeks ago, I bought this new laptop from Futureshop.ca and now, today, I pressed the power button to turn it on and when it does I get this white screen of white. I even tried removing the battery and connect the A
-
I want my email, as it appears to the recipient to read: my first initial, followed by my middle name, then my family name. But no matter what I try, It always appears as name the middle initial, then last name. any suggestions?
-
Hello! Please, tell me how much RAM I can insert to the g7-1053er? On specifications HP support up to 4GB. This laptop has Intel HM55 chipset and processor Intel Pentium P6300 supporting up to 8 GB of RAM
-
HP 6500 a: hp 6500 has only get blank pages when you try to print from computer
My 6500 will print word documents works and makes copies of fine whenever I try to print from the computer - email or web pages, I get blank pages the printer is set up via usb, no wireless its not offline - no error messages - don't just blank pages