I formatted my laptop and my drive hard (D :) is not opening! HELP PLEASE

Similar Questions

• I have format my laptop and now I can't use it. Help!

  Hi, I need help with something. I have a HP Pavilion g6-1b79dx laptop, with Windows 7 64 bit. I bought it 3 months ago. had some problems with Internet explore, with some programs that werenâ´t works as it should, so I decide to reinstall Windows, so I put a 64-bit Windows 7 installation disc and I format the drive where it was installed, and then reinstall Windows but now I can´t connect to internet if I can´t download the drivers for everything that is here , I Don t even know what is all that I need a driver for. I'm trying to download some drivers from HP.com but for example for LAN I download 4 drivers, atheros, broadcom, realtek, etc. because I Don t know that we are in this book. I Don t know the material that is in this notebook, so I try with all, but still didn t work. The phone didn t come with a CD or anything, so I try the option to download from a PC, the HP Support Assistant and then install it on my laptop, but as I can´t to connect to the internet, it s useless. I have download the AIDA64 because a friend told me this program to tell me which is the material that I have in my laptop, but the only thing I get from this was that network PCI/PnP is Realtek RTL8139/810 x Fast Ethernet Adapter and believe me, I completely lost m. I regret when I remember I did this thinking, it would be as easy as I do on a PC, where I did this several times without problem. Please help me and thank you very much in advance

  Hello

  Please copy the backup data your and again using HP Recovery Manager:

  HP Recovery Manager can be accessd from the Start Menu.

  • Pressing the F11 key as soon as you turn on the laptop.
  • Set of recovery disks (you have created before)

  http://support.HP.com/us-en/document/c01895783

  Or you can order the new set of this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• Factory installed Windows XP OS on a Dell laptop and have a hard disk crash. How can I reinstall windows when there is no CD?

  Factory installed Windows XP OS on a Dell laptop and have a hard disk crash.  How can I reinstall windows when there is no CD?

  Order Dell backup discs for the specific Dell computer model you have. Carey Frisch

• I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update?

  I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update? What should I do

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI

  Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI that he keeps giving me a message that the serial number I have providede is valid but calling it a product was not found on this computer. I again downloaded the software installtion of my account page and sitill keeps making the same problem. Do I need a new license?

  Hijeanm9453734 ,

  Seems that Acrobat XI was an upgrade from the previous version. You need choose your earlier version of Acrobat, comes its serial key to activate the upgrade Acrobat XI.

  Kind regards
  Nicos

• I have Photoshop CS3 and copied photos in. NEF (RAW) format to the computer (Windows 7), but they did not open. WHY?

  I have Photoshop CS3 and copied photos in. NEF (RAW) format to the computer (Windows 7), but they did not open. WHY?

  Then CS3 with ACR 4.6 is (at best) naturally obsolete as ACR 8.6 is necessary.

• I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  Hello

  It seems that the latest HP published for this model scanner drivers were for Windows XP.

  Software & Driver Downloads Scanner HP Scanjet 3400C - HP customer service:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=61835&task=&

  You can check in the HP Forums for other users who may have solved that problem.

  HP Support Forum - HP Support Forum: http://h30434.www3.hp.com/

  24/7 Online supports for the House and special products of HP:

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&lang=en&product=top

  Concerning

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• I want to use an older version of Photoshop. I have the official copy, etc. of activation key. However, whenever I start Photoshop it requires registration. I tried internet registration and phone, but they seem to not work. Please tell us how regisyter t

  I want to use an older version of Photoshop. I have the official copy, etc. of activation key. However, whenever I start Photoshop it requires registration. I tried internet registration and phone, but they seem to not work. Please tell us how to register the product. It's Adobe Photoshop CS version 8 for Windows.

  The CS/CS2 activation servers have been removed. Download CS2 and use the new number given to the right of the download link.

  ml https://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.HT

• I downloaded Office creative cloud and downloaded and installed Lr. But Lightroom does not open...

  I recently downloaded creative cloud, open Office and work. Then, I downloaded and installed Photoshop and Lightroom. But Lightroom will not open... What am I missing

  check if it is installed.

  If this is the case, suspension av and antimalware and try again from.

  If this fails, reset your preferences - https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

• Accidentally, I saved a PDF file in the cloud and can't be deleted from there. Help, please. I've upgraded to Adobe Acrobat Reader DC and it does not allow me to save the scans on my computer.

  Accidentally, I saved a PDF file in the cloud and can't be deleted from there. Help, please. I've upgraded to Adobe Acrobat Reader DC and it does not allow me to save the scans on my computer.

  Or simply open CD player

  Go to the Home tab then Document Cloud

  Click on the PDF file to be removed

  Click on remove in the top

• After importing the files in lightroom cc2015.2, they are all less exposed and developing the show exposure to-5. Help, please.

  After importing the files in lightroom cc2015.2, they are all less exposed and developing the show exposure to-5. Help, please.

  Hi paulw,

  For existing images whose exposure have changed, please select all and go to photo > develop settings > reset.

  For import next session, please follow the steps below:

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

  Concerning

  Sarika