I get a message at startup telling pnrlz is compressed

Similar Questions

• I get a message at startup telling could not load or run "c:\Users\Mick\AppData---EXE specified in the registry

  He said so make sure that the file exists on your computer

  It is probably the result of a malware infection removed - you need to check the whole system before trying to correct the message.

  Download and install Malwarebytes Anti-malware www.malwarebytes.org and update and run a full scan (DO NOT enable the option of real-time protection!). Delete everything it finds.

• I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

  I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

  SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.

  It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.

  So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.

  http://en.wikipedia.org/wiki/S.M.A.R.T.

• I get error message at startup lift that C:\WINDOWS\emelumihudusi.dll is not found. Impossible to find info on this program, he worked with.

  I searched for information on this error and can't find anything except 'pay' for programs that corrects errors of .dll.  I'm not having problems I can see with one of my installed programs.

  If you don't want to waste your time, I wouldn't do it.

  I'd do things like:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• «Get the message at startup...» "Host process for Windows Services has stopped"... and sometimes losing his

  I started getting a message every time I boot my laptop Compaq Presario CQ60. Message is "host process for Windows Services has stopped". My speaked symbol now has a red cross I've ever had before. When it turns off I often have not all sounds. I have a feeling that this has happened after an automatic update. I did a system restore, but this does not solve the problem. It's the sound that is most annoying that I never know when or where I will not have it. I hope someone can help

  To clarify, the two problems was started at the same time?

  Try to perform a clean boot in an attempt to determine the cause of the error at startup:
  http://support.Microsoft.com/kb/929135

  Try reinstalling the latest audio drivers available on the manufacturer's website.
  Also, try the other steps listed here: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• XP - I get this message at startup C:\Windows\system32\spool\drivers\w32x86\3\dlcdtime.dll

  I have this message at startup and you want to delete it.  I am running Windows XP,

  Original title: C:\Windows\system32\spool\drivers\w32x86\3\dlcdtime.dll

  Momof2_52

  You have an installed Dell printer or have you already had an installed Dell printer?

  DLCDTIME. DLL is linked to a Dell printer.

  Reinstall the Dell printer driver and the software if you are still using the Dell printer. If not uninstall the Driver and the software of the printer Dell

• I get the message at startup

  I get the startup message that I got my motherboard replacement for my laptop since 2 months ago

  product is HP Pavilion

  Model DV3-2360ee

  warranty: 1y1y0y

  series: CND0012NVV

  Model: DV3-2360-ee

  jump your assistant with my this message, it's making me delay when openning this pc

  I get what exactly the message

  product information is invalid

  the following products information programmed into the system card is missing or invalid

  Serial number of product System board (00 a)

  Product number for the Board of Directors (00 a) system

  I'm finding your quick helpness

  Thanls

• I get a message saying startup disk is almost full and to delete files. How can I go about it?

  I have a macbook air and a message comes up saying that my boot drive is almost full and delete files to make more space. What files and where? Thank you.

  Buy an external hard drive if you do not already have one and migrate personal files, things like documents, music, photos, videos, stuff like that.  Once they are on the external hard drive, delete them from your computer.  You would remove them the same way you would remove any other thing - click it, right-click, select "Move to trash."  Delete nothing however, until you have moved to an external drive.  If you don't save a copy somewhere, once you remove them, it's over and you can't get it back.

  To understand what that other things that can be deleted are go up --> about this Mac--> storage.  This will tell you how many you have on your hard drive right now.  Post here a screenshot of it.

• Why I get this message at startup when windows live mail XP: Sorry, we can not synchronize your calendar because the web calendar service is not...

  December 2011 this message continues to apear after startup or sync Windows Live Mail XP. Sorry, we can not synchronize your calendar because the web calendar service isn't available right now. We will synchronize your calendar as soon as the service is again available. My Dell DIME521 and software are up-to-date, please help...

  Hello

  You can post your queries to Windows Live Mail to newsgroups, because the problem is with Windows Live mail.

  http://windowslivehelp.com/product.aspx?ProductID=15

• HP Deskjet 3520: Error Message at startup

  I now have a 3520 printer that I have had for 2 years. Previously, I had a model 5510 and uninstalled all programs to change information.

  In the last 2 months, I get this message at startup upward.  Run the specific DLL module is not found.  C:\Programsfiles\HP\HPPhotosmart 5510d sries\bin\HPstatus BL.dii.

  I am able to click and lose, but I don't know that it slows down the startup

  Any suggestions please

  The Board of directors who best matches is Desk top. Drop-down menu would not allow this selection. Laptop is incorrect

  I followed your instructions but it made no difference.

  I went back to the list and not the 3 elements that says no 'found', and this has solved the problem.

  I do not how to send you a link to see

  Thank you very much

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• HP27-k350xt:. On each startup, I get this message. "There was a problem starting C:\Users\bulldog2u\AppData.

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  BULLDOG2U wrote:
  

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  You don't want in this file.  Ads by Call Builder is malware that opens the ads on your computer.  If you encounter this error, then it is likely that you have an antivirus/antimalware program which was removed from your computer, but left the startup item.  More information on Call Builder, and how to remove can be found here.

  To remove this item from your startup list, follow these steps:

  System (Windows 7) Configuration utility

  1. In the start search box, type MSCONFIG and press ENTER.
  2. Click the Startup tab.
  3. Uncheck the items you want to run at startup.
  4. When you have finished your selections, click OK.
  5. In the box that appears, click on restart to restart your computer.

• When I re-startup I get a message "no available boot device - HDD internal.

  Original title: start the problem.

  Recently, my computer hangs in.  Sometimes, when I re-startup I get a message "no available boot device - HDD internal. Can someone tell me what this means? (Doesn't look good!)

  This probably (should) means that your hard drive is dying

  Try this if you can initialize

• On startup, I get a message "Alert." "The battery voltage is low," what battery? How do ifix it?

  On startup, I get a message "Alert." "The battery voltage is low," what battery?  How can I fix it?

  Try changing the battery CMOS CR2032 (battery on motherboard).