I get ox8024400a error when I try to get updates on Windows XP
I'm on windows xp when I try to download the updates, I get this error message using exlpoer8, when I try to get the updates that I can't
Hello LindaTownson - 602.
Thank you for the question!
It is disheartening to know that have problems you with Windows Update. As I get it right, you get an error code 8024400 a when you use Windows Update.
1. were there any changes (hardware or software) to the computer before the show?
2. the problem persists with specific updates?
Perform the steps in the link and check.
Temporary connection related errors may occur when you use Windows Update or Microsoft Update
Answer to us if you have problems with Windows Update or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
Tags: Windows
Similar Questions
-
Network error when you try to read from C:\Windows\Installer\iTunes.msi
Original title: error when you try to install iTunes on Windows Vista
I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.I am at a loss to understand this - I'm not much of a PC expert either.Any suggestions? Thank youHello
Thanks for posting in the Microsoft community!
You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.Method 1:
Run the fix it and check.
Solve problems with programs that cannot be installed or uninstalledhttp://support.Microsoft.com/mats/program_install_and_uninstallMethod 2:
You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
Download link
Method 3:
You can try the form as follows article knowledge base and check if you are able to install iTunes.
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926Reference link:
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/Just reply with the results. I'd be happy to help you more -
any copy forbidden error when you try to watch HBO in windows media center.
I get all copying prohibited error when you try to watch HBO in windows media center. It seems that my PlayReady is corrupt. Whenever I try to update game ready to go in Media Center, it fails. I tried uninstalling and reinstalling PlayReady. Said again he must udpate, and always fails. Can someone at Microsoft PLEASE Playready works. It drives me crazy,
These steps 1
Still did not work.
Then did it
(5) download http://go.microsoft.com/fwlink?LinkId=105000 ResetDRM.exe
(6) using winrar or winzip to extract files to ResetDRM.exe (ADVPACK. DLL CleanDRM.exe resetdrm.inf) to a temporary folder. ResetDRM does not work by itself on Windows 8 in any compatibility mode so you MUST check out it
(7) use the Explorer to find cmd.exe to C:\Windows\System32
(8) right click on cmd.exe and "run as Administrator".
(9) cd to the temporary folder where you extracted ResetDRM.exe
(10) run "CleanDRM.exe - v". A text window opens after a few seconds and check that several files have been deleted. If there is an error that a resource could not be opened for exclusive access, you may need to reboot and try again after making sure that Media Center does not start automatically
Reset. Now works. Wow what a PITA.
I think that it was all caused by have to swap disks.
PlayReady my % $# ^ & $% ^ $@ #.
I would mark this as an answer, but I don't see a button for that now, (fact)
-
A connection error when I try to launch games for windows.
A connection error when I try to launch games for windows.
It is said... Connection error. Cannot start the program. There may be a problem with your Internet connection or the Live service.If you have problems with an Internet game, look at the following article.
KB 2528246 - troubleshoot games online using Internet Explorer
http://support.Microsoft.com/kb/2528246They have a lot of suggestions which may help your question.
Sincerely,
Marilyn
-
error code 8000FFFF when you try to install updates from windows update.
error code 8000FFFF when you try to install updates from windows update.
Lonnie,
8000FFFF error code when you click on "check for updates" in the item of control panel of windows on a windows update computer vista http://support.microsoft.com/kb/946414
-
0 80280008 error occurs when you try to install updates from Windows Live 2011 on my computer. He tells me that I already have the flavor of different construction of Windows Live. He tells me that if I want to install this version, I need to uninstall the version currently installed on my computer. I don't want this new version, or is my current version very well? How to uninstall version current/how know what my current version?
You can find support for the installation/uninstall/upgrade Windows Live Essentials in this forum: http://answers.microsoft.com/en-us/windowslive/forum/wlinstall
Tip: Windows Live Essentials, not Windows Update, not prompt you to upgrade (update) to Windows Live Essentials 2011 QFE3 (v15.4.3555.0308).
The upgrade is mandatory since mid 2012. See http://answers.microsoft.com/en-us/windowslive/forum/messenger-wlinstall/mandatory-update-to-windows-live-essentials-is-now/0816b1b7-71ff-44f7-8d74-52505bbbf290?page=32#LastReply
-
Download 80080005 error message when you try to install updates in Windows Vista.
Original title: error 80080005
Hello
I'm still not able to run windows update. Automatic repair of Microsoft did not work, nor has repaired all in one Windows. I get error 80080005. Someone at - it ideas please. I am running Windows vista SP2.
Hello
Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.
Try these methods and check:
Method 1: First of all, make sure that no proxy server is causing this issue.
a. click on the round to start, in the search field type cmd
b. right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.c. has the prompt, enter the following command exactly as written including spaces and press enter
netsh winhttp see power of Attorney
If this message appears, type exit, and then press ENTER.
Method 2:
Check if the bits service is started.
a. click Start, type services.msc
b. Locate the Bits (Background Intelligent Transfer Service) service.
c. double-click on it and check if the service is started and the startup type is set on automatic.
Method 3:
I suggest you follow the steps mentioned in the link one at a time and check.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
If the steps do not help, then follow the steps in the next method and check.
Method 4:
You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Put the normal computer as mentioned in step 7 of section.
Method 5:
I suggest you follow the steps:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
After you follow the steps of troubleshooting provided, if you get the error message please response so that we can help you further.
-
800b0100 error code when you try to install updates on Windows Vista
Error 800b0100 code happens while trying to make updates. I recently went back to the default factory settings and I try to do all the updates. I used the updater and fix it also. I restarted the computer and still no joy when you try to load the update for windows vista.
Hello
· Do you get this error when the individual any update installation (such as Service pack updates security etc.)?
Method 1: Turn off the firewall and antivirus software of third parties.
Step 1: Disable the firewall
(a), click on Start and type Windows Firewall.
(b) click on Windows Firewall.
(c) click on firewall Windows turns on or OFF.
(d) turn the Windows Firewall until we have install Windows updates successfully. If the problem persists then please continue with the next steps.
(e) once we install the updates, please turn on the firewall.
Step 2: Disable the anti-virus application installed on your computer. Disable the antivirus firewall.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps under step 7
Also see: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800B0100
-
80246008 error code when you try to install updates for windows 8
I have Windows 8 and I can't install updates. I discovered this when you try to upgrade to windows 8.1 and got a prompt to complete the installation of windows updates and then upgrade. I get the massage "windows update encountered a problem" and the code is 80246008. I tried a search to windows support but I have a solution for windows 7 or vista. I have 8 7 windows not and can not follow the instructions. I also tried the automatic Troubleshooter and managed to fix some errors, but not all, and updates can't be installed.
Hello
If you receive the Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.
Method 1: Unregister and re-register (BITS) Background Intelligent Transfer Service.
a. press Windows + R key and type of BIT /Unregister. and then click OK.
b. press Windows key + R, type BITS/REGSERVER, and then click OK. After you run this command, the operation is complete.
c. check to see if it helps.Method 2: I suggest you run the DISM tool and check if it helps.
1. open an elevated command prompt. To do this, enter in the right edge of the screen, and then click Search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on Search. Type the command prompt in the Start Search box, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.2 type the following commands. Press enter after each command.
Note may take several minutes for each operation in order to fill.· DISM.exe / Online/Cleanup-image /Scanhealth
· DISM.exe / Online/Cleanup-image /Restorehealth
3. close the command prompt, and then run Windows Update again.
DISM creates a log (% windir%/Logs/CBS/CBS.log) file that captures any issues that the tool found or fixed. %windir%\System32 is the folder in which Windows is installed. For example, the %windir%\System32 folder is C:\Windows.I hope this helps. Let us know if you have other problems with Windows in the future.
-
Windows Install Cleanup Tool error when you try to install it on Windows Vista Business
After a failed installation of Adobe CS 4 on my Windows Vista Business 32-bit system, I am now unable to update or uninstall anything Adobe on my PC. I had read several forums, Adobe specifically, when users suggested to install and use the Windows Installer Clean up tool. I have successfully used this app in the past with Windows XP, but when I try to install on my Vista box cleaning tool I am immediately presented with the error:
Windows Script Host: There is no script engine for file extension ".vbs".
Does anyone know a solution for this? I tried hunting one down a few months ago, but could not find something that solved this problem. Or are the users of Vista GROUND just when it comes to this cleanup tool? I want desperately to remove/repair my Adobe products (which work, but cannot be updated) without the need to make a nuclear weapon and to open and lose time reloading of each piece of software, to restore the profiles of boards, etc...
Hello NMITGuy,
You can view the following information about the error: there is no script engine for file extension ".vbs".
http://www.Winhelponline.com/blog/error-there-is-no-script-engine-for-file-extension-when-running-vbs-files/Please let us know if that helps.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Movie Maker will not film because of "another user is running Movie Maker on this computor... publish »
I'm trying to publish a movie on this computor in Windows Movie Maker. The files are .wmv with a band his .wav and are all stored on my computor. I performed this task with success several times and there is enough free space on the computor.
When I click on publish, there are a few seconds where he tries to publish, but then the program goes into a gel and the dialog box appears with the following: "another user is running Windows Movie Maker on this computor. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again".
When I click Close, there is an icon of wmv on my desk with the title of my project, but it is empty. I am the only user on this computor and I am puzzled as to why this should be implemented. I tried to turn the filters but nothing helped. One thing that I tried was to publish the band sound and the titles and credits without video files and I found it worked.
Any ideas?
Thank you Volenteer J. How would you like to know if a .wmv file is corrupt? Is there something I can do to click the .wmv files that tell me if they are corrupt? I need to identify the files that are causing my problem.
==================================================
Sorry... but it seems that I have more questions than answers.You said initially that you could publish the soundtrack and titles with success...
I was wondering if you tried to add a .wmv file to see if you could publish?What was the source of the. WMV files? They are all from the same source?
They were converted from another format? If_Yes_ maybe another
Converter would be worth a try.You change them widely? (split, rotation, transitions...)
There is a possibility that you could import the Windows Media .wmv files
Encoder and convert them to... .WMV to .wmv. Seems pointless, I know...
but it would create a new .version of the. WMV files and can fix that
perhaps never the problem.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Windows Media Encoder 9 Series
http://download.CNET.com/Windows-Media-Encoder/3000-2212_4-14887.htmlUsing Windows Media Encoder 9 to convert a video file to .wmv
http://help.UNC.edu/3940Re-index WMV files
http://www.jhepple.com/support/reindexwmv.htmGood luck...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Original title: Uninstalling fiz 641, error code
Impossible to update windows Vista premium 64-bit edition I get error 641
Hello
· Update is causing the problem?
· What is the full error message?
· You are able to install some other updates?
It seems that there is a problem with the update of Windows. Click on the link below.
How to resolve problems connecting to Windows Update or Microsoft Update
-
Whenever I try to check on the plugins so that I can update them, etc, they start to load and then I get a message 'Service error find Plugin' we encountered an error. Try your request again later. The result is that I can not check for update.
Tonight I tried to check on the plugins. They have all loading up and showed me the State of updates, etc. Thanks for trying to help me. Don't really know what caused my problem, but it works now.
-
I get an error 8024402f when I try to check updates on Windows server 2008.
The following is in the WindowsUpdate.log file:
2012-09-25 12:32:50:371 1216 714 PT +++ PT: Synchronizing server updates +++
2012-09-25 12:32:50:371 1216 714 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, server URL =https://www.update.Microsoft.com/v6/ClientWebService/client.asmx
2012-09-25 12:32:58:758 1216 714 PT WARNING: ECP: could not validate the downloaded cab file digest from http://www.download.windowsupdate.com/msdownload/update/software/svpk/2008/06/1308735_35f1e7e6008a5d3540aed808093686553578957a.cab with error 0 x 80091007
2012-09-25 12:32:58:758 1216 714 PT WARNING: ECP: this trip contained some optimized updates failed. New number of update = 11, former County = 30
2012-09-25 12:32:59:951 1216 714 PT WARNING: synchronization of updates: 0x8024402f
2012-09-25 12:32:59:951 1216 714 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2012-09-25 12:32:59:951 1216 714 Agent * WARNING: could not synchronize, error = 0x8024402F
2012-09-25 12:32:59:951 1216 714 Agent * WARNING: exit code = 0x8024402F
2012-09-25 12:32:59:951 1216 714 Agent *.
2012-09-25 12:32:59:951 1216 714 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
2012-09-25 12:32:59:951 1216 714 Agent *.
2012-09-25 12:32:59:951 1216 714 Agent WARNING: customer WU didn't search for the update with error 0x8024402f
2012-09-25 12:32:59:969 1216 dcc to THE > # RETURN # to THE: research updates [CallId = {B929AD80-1186-4247-BC28-F37AF0BD51AC}]
2012-09-25 12:32:59:969 1216 dcc # warning: reminder of search failed, result = 0x8024402F
2012-09-25 12:32:59:969 1216 dcc # warning: could not find updates with error 8024402F code
2012-09-25 12:32:59:969 1216 dcc to THE #.
2012-09-25 12:32:59:969 1216 dcc # end # in THE: research updates [CallId = {B929AD80-1186-4247-BC28-F37AF0BD51AC}]
2012-09-25 12:32:59:969 1216 dcc to THE #.
2012-09-25 12:32:59:969 1216 dcc to THE timeout parameter next detection at 2012-09-25 22:32:59
2012-09-25 12:33:05:485 1216 714 report REPORT EVENT: {222ADD5C-94EB-453A-A369-AC17354BFDB3} 2012-09-25 12:32:59:951 - 0500 1 148 101 {00000000-0000-0000-0000-000000000000} 0 software AutomaticUpdates failure 8024402f from Windows Update Client sync did not detect with error 0x8024402f.
2012-09-25 12:33:05:485 1216 714 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
2012-09-25 12:33:05:485 714 1216 WER sent report: 7.6.7600.256 0x8024402f 00000000-0000-0000-0000-000000000000 Scan 101 unmanaged
2012-09-25 12:33:05:485 1216 714 report CWERReporter finish event management. (00000000)Original title: impossible to verify updates, windows update error 8024402f on Server 2008
Hi Terry Felesena,
Thanks for sharing this information with us.
In the future, I wish that you post your question (regarding Serverproblems) in the TechNet Forums because it caters to an audience of it professionals.
Check out the link-
This forum is for issues related to the environment of the home user .
Hope this helps!
-
1722 error when I try to install iCloud for Windows 4.0 update.
I get the following message: "there is a problem with this windows package install." A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ". I tried everything that suggested in the 'Community' and online, I could find. Nothing works. I've not had problems with other software including iTunes.
Hello
I suggest you try the steps below and check if it helps:
Step 1: Verify that the Windows Installer service is running or not
Start the Windows Installer service.
1. Click Start, type services.msc and press to enter.
2. from the list of objects, double-click Windows Installer service.
3. change the startup type to automatic and click on the Start button to start the service.
4. click on apply and then click ok.Check whether the problem is resolved.
Step 2: Unregister and register the Windows Setup program again
1. click on Start Orb, in the search box of start, type MSIEXEC /Unregister. and then click OK.
2. click on Start Orb, in the search box to start, type MSIEXEC/REGSERVER, and then click OK. After you run this command, the operation is complete.
3. now try again to your installation.
Additional information:
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651
"There is a problem with this Windows Installer package... "the error messages when installing iTunes for Windows
https://discussions.Apple.com/docs/doc-3551
If you are facing the issue with iTunes, I recommend you contact Apple support for assistance:
http://www.Apple.com/support/contact/
Hope the helps of information.
Please post back and we do know.
Maybe you are looking for
-
Entry door two s in El capitan
Anyone got two bridges working in El Capitan? Is it still possible? With two gateway is average, each interface has a bridge and both work.
-
Satellite L355 - the PNRP service does not start
My Satellite L355 can't join a homegroup on my home wireless network, because the PNRP service will not start. The service depends on, Peer Networking Identity Manager, PNID, starts. File missing or corupt? Any ideas how to fix? Thank you, Jack
-
Got a new laptop, has win8.1. I am able to go down to win7?
Hey thanks for the research. I just got a HP Envy 17-j184nr. It comes with Windows 8.1. Nice series. But I perfer Windows 7 plus 8/8.1. I am able to go down? I know on another hp computer in my house (among the less expensive, under $400) you can not
-
Dashboard have a battery?
I want to know if the dash internet Viewer has a battery or should it always be coneccted to a power socket with a cable. Thank you.
-
* Original title: attachments Help, please. I did something wrong (AGAIN!) I had no problem with access to attachments to my e-mails, but a problem occurred just. I can longer open attached pdf files. I am able to preview the files, but they are too