I get the error access violation
I was do an access with third party software Violation, three, four, five times a day. I end the process in my 3rd party and Outlook program in the Task Manager / processes. But I'm still the access violation error.
Access to the 008BC16F address violation
Access to the 00523588 address violation
I have Windows 7 and office 2013-32 bit. The 3rd party program is compatible with it. The extension is .msi
I am the administrator of my machine.
Please, can someone help me?
Thank you
Response of Linney here--> http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/access-violation-error/19d85a13-e416-4842-9646-93bfd115cff1
If this does not help, you might mention the name and the version of the program 3rd party or ask for help for technical support for this program.
Linney mention looking for malware.
instructions
What is the name and version of your anti-virus program?
If you did not recently, download, install, update and run these two free programs.
Use the free version, not the free trials of "pro" versions Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.
Do not run the scans at the same time. Each scan will take a while. Start one and go do a non-it chore. Once the scan is finished, leave the program to deal with anything it finds.
Once done, you can keep or uninstall programs, or both. If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.
Tags: Windows
Similar Questions
-
I get the error access path/file execution error ' 75 "you try to start a product.
I get the error access path/file execution error ' 75 "you try to start a product. How will I know which file it is trying to access. Is there a log or something?
Hello
1. when exactly you get this error message?
2 have you made any changes to the computer before the show?
Please provide more information on the issue so that we can better help you.
In the meantime, make the boot minimum troubleshooting and check if the problem persists.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note:
How to configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
- Click Startand then click run.
- Type msconfig and click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
- When you are prompted, click restart to restart the computer.
-
Is attached a screenshot of the error. I also use MUSE to teach a web design class, and we have the same question in class. Not a very good example to show the students when it does not work as it is supposed to.
Hello
Please follow these steps and let me know whether or not it solves your problem:
1. exit the Muse.
2. go into the Creative Cloud Desktop app and Sign Out through preferences (in the menu on the gear icon).
3. exit the creative cloud.
4 restart the creative cloud.
5. connect you.
6 restart the Muse.
7. open your file and publish them.
Thank you
Cristian
-
Can install printer drivers which are in 'standard list of printers', but when I try to install a local printer and choose update windows for the Okidata IBM-ML321 on Windows 7-64 bit driver, it errors when you try to install.
Hi David,
I suggest you scan the computer antivirus using the Microsoft Safety Scanner.
Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note:
1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
When I connect my 1 TB transcend hard drive icon only appears in the Local disk and by double clicking on it says access is denied; parameter is incorrect... What do I do?
Hi Olivier,.
I suggest you follow the advice given by Nithyananda J on February 9, 2010 and check if this may help.
Registry warning: Back up the registry
Let us know the results. We will be happy to help you further.
-
When you use Photomodeler program error "access violation 0 x 69594396.
Original title: 0 x 69594396 access violation
I get this error when using Photomodeler and more specifically during the display of the generated 3D model.
Any advise?
Thank you
Hello
Thanks for choosing Microsoft Community!
You have reached the right forum. Let us work as a team and try to solve this problem.
If I understand correctly, you may not use the Photomodeler software; you get the error "access violation 0 x 69594396.
Please answer these questions to better understand the issue:
1. What is the full error message?
2. is it works much earlier?
3 did you changes to the computer before the show?
Let us try the following methods:
Method 1: uninstall and reinstall the program and see if this is useful:
Reference:
Uninstall or change a program:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Important note: before UN-installing, make sure that you have a media and the product code if necessary for re - install.
Method 2: You can contact software support Photomodeler here:
http://www.PhotoModeler.com/Contact_us/default.htm
Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.
-
Original title: error: violation of access 0x7C92A82C
I'm under win xp sp3, I get this message after the airstrike, I installed: error: violation 0x7C92A82C (tried to write to 0x00030FC8), program terminated access. Please help me guys, thanks.
Hi Iwan,
Welcome to the Microsoft community!
After you have installed the Airstrike game, you get error access violation 0x7C92A82C (tried to write to 0x00030FC8), has been abolished.
1. When do exactly , you get this error?
2 - is the full name of the game?
Respond with more information so that we can better help you.
See the article:
Suggestions for a question on the help forums
http://support.Microsoft.com/kb/555375
If you need any other assistance, let us know and we would be happy to help you.
-
Hello to all on the forum,
I am running DIAdem 2015 (15.0.0f6005) on a Windows 7 Pro SP1 i3 4 GB RAM machine.
I want to evaluate a test. Data are expressed as 25 .txt files. I need to plot, one of the values on the whole test time. I tried to combine the data from all 25 in one file .tdm .txt files. I came far enough until I met my problem. After gathering around 15 .txt files in a .tdm, tiara doesn't let me continue. It gives this error message (in German, I'll translate as good as possible):
"When executing command 'DataBlClpPaste('1-52',1859122,0)' a rumtime error has occurred.
Error: ACCESS VIOLATION
Address of the error: 0000 P 280
"Name of the module: FGSData.DLL.
I will describe my procedure in which this happened:
-Open the .txt with plugin I had created the first import
-Ribbon with two windows view channel: have the target in a secondary window group, drag the newly imported from .txt in the other channels
-In the secondary window with new data, select the lines I want to add to the data target group by clicking on the first line, then scroll to the last row and shift-select that. CTRL + c to copy the data
-In the target group, click the first empty line, and then ctrl + v to paste data here
After the last step, instead of pasting the new data in the target dataset, the above message error. I can't do anything, but click on 'ok '. After ok, the program window will not respond to any click except for switching between Navigator / View / analysis /... I have to close DIAdem, where I can always select "close and save", that works too.
I could go a few times after reopening DIAdem, but finally, which stopped working. It now gives me the error message whenever I try to do this routine. The .tdm file is 21Mo now, the .tdx is 1.1 GB.
I appreciate any help on this, I really would prefer combining data using DIAdem on trying to copy and paste around 1 GB of data .txt into one giant .txt file. It takes very long to not even open a .txt of 50 MB file, I fear this would be a messy process.
Best regards
Simon
If you are using DIAdem 2015, there is a new entry in context menu where you can select Add.
Maybe it helps.
The help of DIAdem 2015:
Adding data
Adding data to merge similar series ratings data in order to deal with them. In the process, DIAdem adds the data to load for existing channels with the same name in the data portal instead of storing data in new channels. Perform the following steps to add the external data area data channels in the data portal:
Open the NAVIGATOR tiara.
Select remove internal data to delete the data in the data portal.
Find the Demo1.tdm file in the file browser.
Drag and drop the file in the data portal.
Select the Demo2.tdm file in the file browser.
Open the context menu of the file and select Add data.
Tiara adds the data in channels that have the same name in the data portal. In the properties of the Data Portal window, you can see that the number of values in the channels has doubled.
-
I get the error messages form I mesh and cannot access my profile or friends list '
MIicrosoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry
For iMesh, you can go here...
http://www.iMesh.com/community.html
I don't understand the other two problems that you encounter. If you please would explain what they are and what, if any, error messages that you receive. Also, what antivirus do you use, and you run Windows XP SP3?
--
Gina Whipp
Microsoft MVP (access)Please post all responses on the forum where everyone can enjoy.
-
I have a problem, try to uninstall the ask toolbar. get the error message: unable to access the VB script... need help
Hello
How do you try to uninstall the toolbar?
I would suggest trying the following methods and check if it helps.
Method 1:
Try the steps in the following Microsoft article and check if it helps.
How to fix script errors in Internet Explorer on Windows computers:
http://support.Microsoft.com/kb/308260
Correction of errors in Internet Explorer: http://support.microsoft.com/kb/822521
Method 2:
Try to uninstall the toolbar, programs and features and check if it helps.
Uninstall or change a program:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Hope the information is useful.
-
original title: sharing of Vista with XP
I'm having a problem of sharing back and forth between xp and vista. I've set up the sharing, but I still get the error message that I don't have permission to access files
Kill / disable the Vista password protection option. If you have installed a separate firewall, configure it.
-
I can't download itunes on my computer its gives me an error saying "this installation package cannot be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" can anyone help
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923Uninstall software, remove programs and solve uninstalling problems
http://www.revouninstaller.com/Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
http://support.Apple.com/kb/ht1925Hello questions, see if that helps: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926Turn on Windows 7 'Compatibility Mode' to iTunes:
http://www.PCWorld.com/article/188534/turn_off_windows_7_compatibility_mode_for_itunes.htmlWindows reports that iTunesSetup.exe is not a valid Win32 program
http://support.Apple.com/kb/TS1406First of all check if you have a version of 32 or 64-bit Windows:
1) click the Start button, right-click computer and then click Properties.
(2) in the system, see the system type - it will say either 32 or 64 bits.
(3) download the appropriate version using the links.ITunes download (32-bit):
http://www.Apple.com/iTunes/download/Download 64 - bit:
http://support.Apple.com/kb/DL1037Make sure that the "Windows Installer" service is running, or force start to begin.
(1) open run, and type services.msc, and then press ENTER. You can also go
Control Panel/Admin Tools/Services.(2) locate the Windows Installer in the list of installed services.
(3) check that the status is "started".
If the condition column is empty, right-click Windows Installer, and then select start.(4) If you get the error trying to force start the Windows Installer service,
and then change the Startup Type to automatic (the default value is 'Manual').
and then restart the computer.(5) very Installation Service runs after you restart the system.
Also:
Forum of Apple's Itunes: you can find a solution (if none of the above is of no help) to your problem when you post on their forum.http://discussions.Apple.com/category.jspa?categoryID=150
J W Stuart: http://www.pagestart.com
-
When you try to access the user profile, get the error message "the service user profile Service has no logon. User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should). Anyway to fix the corrupted if user profile profile are available?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
Tried to access the programs and get the error: message 16. What is the problem? Help, please! Photoshop, photoshop elements, Dreamweaver - none of my creative Cloud applications will be commissioning, since my last update. I need to access these programs for the job, I'm trying.
Hi wdriver,
It seems that for some unknown reason the authorization in the licensing folder is deleted. Please try to start one of the applications by right click and select run as administrator, it should solve the problem by doing this.
Please let us know if it helps.
Kind regards
Abhijit
-
This only happens with programs of msi. I used the fixit for me solution and it does not solve my problem and I'm afraid to mess with the registry. What can I do now? I am running Vista Home Premium. I don't know exactly what details you want. Just ask and I'll try to provide answers.
Sorry to take so long to get back to you - but I have tried different things to try to solve my problem.
I was able to upgrade Silverlight without problem. But failed to update Adobe Reader or Java.
I ran the Microsoft fixit to resolve the Error 1606. These are the 50356 fixit. Microsoft help page says:
"This problem can occur if there is an incorrect setting in one of the following registry subkeys:"
- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
- HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
It did not work. I went to the support page that you recommended and ran the fixit there - and who did not.
Then I noticed that this fixit 50356 mentions 'current user' - so I tried to change my standard account to an administrator account. It basically gave me two administrator accounts. (I already had a separate administrator account and was simply put the password so that it will prompt to update Java and Adobe.) Then I tried to update Adobe Reader by using the new administrator (officially a standard account) and had no problem! Then, of course, the problem has been to my administrator account.
I'm guessing that the Microsoft fixit didn't work is because I was on the internet using my standard account, not my administrator account. So, it 'fixed' my standard account, that does not need fixing. I can't connect to the internet using my administrator account, unless it is necessary.
It would be useful that the Microsoft help page has explained that the problem is probably in the administrator user account that is used to download and upgrade programs, that the fixit solution that they recommended would fix the problems only on that account, and I had to log on that account, connect to the internet and then running the fixit. But it doesn't work. It just says: If you get the Error 1606, run this fixit.
I changed my new manager at standard and I'll connect to my normal administrator account and run the fixit from here. If this is the problem with this account, I will be setting up a new administrator user account and delete it.
Thank you very much for taking the time to try to help me. People like me who do not know much about computers need people like you to help us!
Maybe you are looking for
-
This morning at 10: 30 PDT when I opened Firefox browser, I had a type arcade of its follow-up of a siren sound that will not go away until I closed Firefox. Please help me get rid of this annoying noise! This has happened Each time Firefox opened to
-
The split screen does not open with all applications. I'll have my drive open, so I try to split the screen with Notes or Pages, it won't work. I've noticed this with other applications.
-
This receive each time. Have even tried to do manual updates. I am admin of my machine. Some manual updates install successfully. But I need a lot of updates and do not want to do them all by hand.
-
Thresholds to display recent updates causing
Recently, I installed 17 updates and after that the computer has rebooted (and updated some registry files) my screen was resized to not display ~ 2 inches on both sides. It shows everything, but just does not use the entire screen. I tried to change
-
No audio at the bottom of the screen icon.
I have no sound, I can't find the sound icon who was always at the bottom of the screen. I think that the sound could have been accidentally turned off. How can I check that and turn it back on?