I get the message: error code: ERR_INTERNET_DISCONNECTED

Similar Questions

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

  original title: Windows Mail

  Unable to get windows mail to send or receive.  Get this message error code when you try to send:

  Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
  0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
  To find these server addresses, took some time to locate.  After locating and entering, using authentication
  sign username and password, he kept sign asking repeatedly.
  Any help on these questions would be appreciated.

  POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.

  To find these server addresses, took some time to locate.

  POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

  Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• Get the 8024401c error code when you try to update.

  Get the 8024401c error code when you try to update. Tried various fixes - neither works. The message also says that I have installed no update, i.e. no history of update that is false. Any ideas.

  Concerning
   
  Original title: run Windows 8

  Solved the problem. Changed the configuration of updates of ' install updates automatically (recommended) to "check and download (do not install). Updates are now being downloaded and my choice to install.

  Thanks for your help, Jose Antonio, I learned how to scan my computer now!
  Regards Gary

• Often, I get the message error "Firefox cannot find the server.

  Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.

  I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s

  See also:

  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites

  You can try to reset (power off / on) of the router.

• Windows Update fails to run and get the C800044E error code

  Windows Update does not check the updates and I get the C800044E error code.  So far, thi is what I did:

  Get the C800044E error code when you try to run Windows Update.  Tried Mr. FixIt, who did not work and tried to do what does not work also:

  Please, try the following suggestions to see if the problem can be solved:

  1. click on Start, type notepad in the start search box and press ENTER.

  2 copy and paste (or type) the following command lines in the Notepad window:

  net stop wuauserv

  CD %systemroot%\SoftwareDistribution

  Ren Download.old download

  net start wuauserv

  3. on the file menu, click on record under and type Rename.bat .

  4. click on save as type and then click on all files (*. *) .

  5. save the Rename.bat file to your desktop.

  6. right click on the Rename.bat file, and then click run as administrator .  If you are prompted for an administrator password or for confirmation, type the password, or click continue . It renames the download folder.

  7. try to install the updates again.

  8. If the problem is resolved, delete the Rename.bat file that you created in the previous steps.

  any other ideas?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Is this a sudden, new problem?

  Are you having difficulty he run in http://support.microsoft.com/default.aspx/kb/971058 and don't you run it in default and aggressive modes?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the following error code 80070bc9 when you try to do window upsdates

  I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

  Hello Kristen,

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable or uninstall the security software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset components Windows Update the link below:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Hope this helps

• Whenever I try to install these two windows automatic updates, I get the 8024200d error code

  I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

  Hi BobTheDude,

  I suggest you to follow these steps and check if it does the work for you:

  ·         Follow the resolution 2 in the article
  http://support.Microsoft.com/kb/947366

  ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
  http://support.Microsoft.com/kb/963699

  ·         Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1.	Click Start type cmd and then click OK . Right click on cmd and then click run as administrator .
  2.	At the command prompt, type the following commands and press ENTER after each line: net stop cryptsvc Ren %systemroot%\System32\Catroot2 oldcatroot2 net start cryptsvc output

  ·         Empty the software distribution folder

  1.	Click Start type services.msc , and then click OK . Click right services.msc and then click run as administrator .
  2.	In the Services (Local) pane, click automatic updates , and then click stop .
  3.	Reduce the Services (local) window.
  4.	Select all the contents of the Windows distribution folder, and then delete them. Note By default, the Windows distribution folder is located in the drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5.	Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6.	In the Services (Local) pane, click automatic updates , and then click Start .

  ·         Disable security software

  ·         You can download and install the stand-alone package includes updates that failed
  KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

  KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

  Please let us know if it helps.

  Thank you and best regards,
  David

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• I get the message error 1327.invalid drive: M:------tries to install a nuance product

  I try to install dragon naturally speaking and I get the message, Error 1327.invalid drive: M:------.

  How can I fix it

  Hello

  You can try these:

  a. log on as an administrator or as a member of the Administrators group.

  b. Click Start, click Control Panel and then click on performance and Maintenance.

  c. click on Administrative Tools, double-click computer management and then click Disk Management in the left pane.

  d. right-click on the CD ROM drive and click change drive letter and paths.

  e. click the button modify and change the drive to K and then click Ok.

  f. click Yes to confirm.

  g. install Dragon Naturally speaking

  See also: http://nuance.custhelp.com/app/answers/detail/a_id/5720

• I am trying to update Windows and I get the 0x080072F8F error code

  I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

  How many copies of Windows that you downloaded?

  First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

  Follow the steps below to solve the problem;

  
  Method 1: Verify that your Internet connection is working

  This method is rated: moderately easy.

  To run this method, follow these steps:

  (a) click Start and then click Help and Support.
  (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
  (c) in the list of topics, click on solve the network and Internet connection problems.
  (d) click the link that best describes the problem you are experiencing.
  (e) follow the suggestions to solve the problem you are experiencing.
  (f) when you are done, follow the steps in method B to reactivate Windows 7.

  If this method does not work for you, go to method 2.

  
  Method 2: Activate Windows 7 using the automated telephone system

  This method is rated: easy.

  To run this method, follow these steps:

  (a) click Start, and then click computer.
  (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
  (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (d) click on show me other ways to activate.
  (e) click on use the automated telephone and then follow the instructions that are provided.

  
  Method 3:

  Reset your TCP/IP stack

  (a) click Start

  (b) type in the box search command

  (c) right click command and select run as administrator

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

• whenever I try to get the security of microsoft essintials I get the same error code 0 x 80070643 what do I do now? ___

  After several attempts to download microsoft security essentials, I get the same error code 0 x 80070643 what should I do now?

  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/908fad3e-F9FC-4d8a-BE83-ae7d3bc48db5 If this post answers your question, click mark as answer .

• I get the message error loading 3da1a2 ~ \dojrjrj2h.cpp the specified module could not be found

  Whenever I start my computer, I get the message error loading 3da1a2 ~ \dojrjrj2h.cpp the specified module could not be found. Anyone know what this means? Help.

  Moved from Vista devices and drivers Forum.

  Hello

  Google has no information on this file, so it's probably a Malware startup more entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I get the message error "this document cannot be printed.

  When you try to print a pdf file, I get the message error "this document cannot be printed. The problem is when I switch to another printer.

  Hello

  OK, consider to reinstall Adobe Reader. First uninstall it and then reinstall.

  If this did not help then in the print dialog box, make sure the "Print to file" checkbox is not checked!

  Make sure that you have selected the right printer and try to preview before print see if it shows anything be it for printing?

  Have a look here

  https://www.Adobe.com/support/techdocs/333236.html

  Hope above can help,