I got the black screen of death & now im getting disk boot failure, insert system disk

Similar Questions

• I got the Blue Screen Of Death with Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Original title: Help, I got the blue screen of death!

  Can someone help me please? Whenever I turn on my computer, it goes to the BSOD. I tried the last settings that worked, but he went to the BSOD too! In addition, safe mode it won't work goes to the BSOD as well. Nothing works. I have to go to a computer store to fix it, or is - it possible to fix it at home? Please help immediately!

  The BSOD I get says:

  A problem has been detected and windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: disable or uninstall all utility defragmentation or anti-virus disk backup,. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /f to check for hard drive corruption, and then restart your computer. Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Hi TheCookeNinja,

  I suggest you run the check disk (chkdsk) of the Recovery Console & check if you are able to boot to the desktop correctly.

  Step 1: To start the Recovery Console, you can follow this link.

   

  To start the computer and use the Recovery Console

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_overview.mspx?mfr=true

  Step 2: At the Recovery Console prompt, type the following command and then press ENTER:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Reference:

   

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I hope this helps.

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• Does anyone has found a fix for the black screen of death on Mass Effect 3 on Xbox 360?

  My game Mass Effect 3 crashed on Xbox 360.  It freezes and becomes a black screen of death just prior to the start menu.  For some reason, is that xbox live associated profile.  It works on any profile other than the one I used and played through all 3 games.  I spent an hour and a half with xbox live support and they could not solve the problem. They also recognized that I'm not the only one with this problem.  We tried to remove and reinstall my profile, I downloaded my profile on the hard drive of my another xbox 360 console without result. We also moved all the parties backed up to the cloud and remove all content of Mass Effect 3, still no luck. They suggested that I come here and try to find answers and start a rallying cry for a patch to fix this problem.  It's extremely frustrating after playing every game Mass Effect 3 thanks to several times that all of my choices and just saved games be erased by a stupid bug in the game.  I have hundreds, if not thousands of hours invested in the series.  I don't want to start over with Mass Effect 1 and play through it again on a new profile.  Who can say this bug won't happen on my new profile anyway?  Please, if anyone else has this post problem here if you have resolved, or simply to add your voice to those who need this fixed a bug.  Thank you.

  Hello

  This forum is supported only for the Windows operating systems (have no idea why they told you to come here), so I suggest you to stay in touch with Xbox support.

  XBOX support:
  http://support.Xbox.com/en-us/games/browse#games%2Fpc-games%2FNavigationList {2} Ms

• Comments on new MBP XP got the blue screen of death at startup.

  I get a blue screen of death when I copied and then started a guest Windows XP on my second MacBook Pro. I've used this comments XP on my old MBP for a year without problems. The two Mbps run VMWare Fusion 3.

  During startup, I got the message "features supported by the processor (s) in this machine are distinguished by the features supported by the processors of the machine on which the snapshot has been registered."

  Here are the details.

  1. I made a judgment of my guest XP on my old MBP

  2. I then copied the folder of the Virtual Machine - Open /Users/ - I chose the stermaster2_1VM.vmx -.

  2. has asked if the machine has been copied or move - I chose copied.

  3 merger then threw "features supported by the processor (s) in this machine are distinguished by the features supported by the processors of the machine on which the snapshot has been registered." -I chose Yes

  4 merger threw "cannot connect virtual peripheral Serial0 because no corresponding device is available on the host. You want to try to connect this virtual device whenever you turn on the virtual machine? "- I chose YES

  5 merger: "Virtual device Serial0 start disconnected." - I pressed OK

  6 merger: "Cannot connect virtual peripheral serial0 because no corresponding device is available on the host." - I chose Yes

  7 merger 'VMware Fusion is unable to provide all the graphics features expected by this machine virtual.' - I pressed OK

  Then a blue screen of death

  I was wondering if you see anything wrong with what I did above.

  Thank you

  Bernie

  Check if you have a file *.vmss in the Directory VM - If yes - delete it and try again

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Got the blue screen of death on the old Dell PC that I can to restore without losing my son especially pictures files

  Insurmountable boot disk

  The safest option is to remove the drive from the computer, mount it in a USB caddy and plug it into another computer to see if it can be read.

  This involves absolutely no changes on disk and therefore has the greatest opportunity to recover the files intact. Although you can try to boot from a Windows DVD and run a repair when it comes to something like the photos that are by definition irreplaceable, I would always look a 1 passive recovery.

  You can then go to active repair knowing that essential equipment is secure.

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Difficulty for nvlddmkm.sys Black Screen Of Death

  I think I finally found a solution for the black screen of death bugs nviddmkm.sys and all the latest drivers Nvidia.  It works on my IQ816 with NVIDIA 9600GS, this should work for most TouchSmarts who have black screens randomly.

  It is a free utility called RivaTuner which works with Nvidia cards.  You can get it here:

  http://downloads.Guru3D.com/download.php?Det=163#download

  Follow these steps:

  Install Rivatuner.

  Click OK when it gives you the box of not being a supported card or whatever.

  On the screen that appears, click on the small icon next to customize it's under the driver settings in the middle of the screen.  Then click on the map icon.  It looks like a video card and should be the first icon on the left.

  On the screen of the base clock, click the check box at the top to allow.  Click on detect when he asks.  The value of the drop-down list on the right to 3D.  Then set the clock of kernel to 550 or as close as you can get to it.  I had 551.

  You can check start with Windows or to wait and see if it is correct, and then return to the screen and check start with Windows.  Who will ensure that the setting will stay all the time.  Otherwise, it is just to the original settings.

  Click OK.  And it should be.

  If you need help, watch the video tutorial about it here:

  http://www.YouTube.com/watch?v=NU8_EMjSUf4

  So far, since I did that, no black screen at random death.  So this can be.

  I am pleased to announce, this was the solution for my plant video.  I got not a single accident because I did.  RivaTuner saved.  My pc works perfectly now.

• Vista black screen of death without hope

  After being hit but an annoying Vista Security Online virus, I have restored the computer system. At the end of the restore, I'm met with the black screen of death.

  So I searched online for remedies.

  CTRL Alt Delete returns without window

  By pressing SHIFT 5 times doesn't give me the ease of control option

  Safe mode with command prompt does not give me the prompt (just a black screen)

  by pressing F8 and using the start option last charge always gives me a black screen

  I don't have my vista drive.

  I have my Windows 7 disc (I got it because I bought a laptop and they did a promotion for a free update)

  I the have not yet installed on any of my systems, I have in my drawer and hoping that he upgraded to 7 could solve the problem, but it still just black, it does not load the disc.

  Any help would be grateful, if you please.

  Fixed a problem with system restore with an another system restore? Heh

  Anyway had it works

  I managed to find a torrent of recovery windows vista ISO and burned it to a disc
  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  I think that he would start and I would like to access the disk, went to repair this computer, then did a system restore to a time where the blackscreen wasn't there.

  like 2 hours later, he finished and I started and I met a black screen, but this time it was different, I was actually able to Ctrl Alt Del

  Was about to do the "New Task-> explore" everything but the office and everything just started by itself. After the computer restarts to ensure that the problem has been resolved, it started normally

• Windows 7 black screen of death - please help!

  Hi, so due to a failure, I had to turn disconnect a computer from work from the wall, wait, and plug it in again. I made sure to turn off safe and everything...

  in any case when I turned it back on, I got the black startup screen. I tried safe mode (cannot start... end by themselves KSOD followed by restarting the computer), I tried to repair the system and the system restore (does not work because I have no restore points). I have tried "enable boot logging", "departure from the last known good configuration", "safe mode", all with the same problem. If I can get past the login screen that it just goes to the black screen of death, followed by an automatic restart. Then when it starts again it says "BOOTMGR is missing".

  Any suggestions? I did a system repair disc and started with the CD player, and who also did nothing. Starting to think I'm a little screwed here.

  Hello

  I realize has the inconvenience that you are experiencing with your PC to start. I will certainly help you to question.

  I appreciate your efforts to resolve the issue. However, this error indicates that the boot sector is corrupted or missing.

  I suggest you to refer to the section of rebuild data BCD (BCD) of Windows recovery environment (WinRE) from the link below and check if it helps:

  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»

   

  For more information, you can also check out the link below:

  Resolve stop (blue screen) error in Windows 7

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Satellite L450D - 13 X - black screen of death/Blue Screen of Death

  Hello everyone.

  I have a Toshiba Satellite L450D - 13 X for children, and for the price it's a good laptop. Have had no problems with it until two weeks ago, when the screen froze for boys while playing a game and downloading a program on the net. Had to make a stop of force and since then, we have a BSoD on each startup. That's what we tried:

  On "Starting Windows", we are given the option to either 'Launch Startup Repair' that ends as BSoD or "Start Windows normally" who returns to the list of option "starting Windows."
  Any attempt enter 'Safe Mode' BSOD results.
  Attempt to boot an ISO of the disk recovery Windows on a USB key (we did put highlight and make promotion up) results in BSoD. Borrowing a correct installation of Windows 7 DVD and highlighting what an option cause BSoD.

  In fact, the only option that we used who threw something different has been using advanced startup options. On one of these options, we've got the Blue Screen of Death with the following information:

  Unmountable_Boot_Volume
  Disable memory the Bios Options such as cache/occultation

  Technical info

  Stop: 0x000000ED (0xFFFFFA80023C2CDO 0xFFFFFFFFC0000185 0000000000000000 0 x 0 x 0000000000000000)

  I don't mind erase the hard drive and leave, there's nothing on what is essential. Very, very well, I'd appreciate a steer on it. Checked the Web for things and nothing seems to help for other options. I'm not particularly tech literate but can follow directions.

  Thanks in advance.

  It is really possible that the HARD drive is faulty.
  If possible try to get another same HDD used for test purposes and install OS using the Toshiba recovery image.

  A friend of mine had a similar problem and after Exchange of HARD drive, everything went well again.

• I just got a black screen with "this copy of Windows is not genuine".

  Original title: OS not real question?

  Well, I bought a computer off Craig's list this week. Yes, I know this isn't the safest place to get a computer, but what's done is done. The current operating system of the computer is Win7. However I just got the black screen with "this copy of Windows is not genuine". I looked at the back of the computer and saw that he has a real sticker Win XP Pro. So is there anyway I can just download XP Pro on this computer and be good from there?

  Thank you
  KnightChain

  Check with the manufacture of the computer to see if you have a "recovery partition" and how to use it to restore XP or if they still have the support of Windows XP available with they can send you to usually a small fee.

  J W Stuart: http://www.pagestart.com

• Black screen of death on Vista

  Hi, I'm new to this forum. I am havign a big problem with my vista operating system. I connect and I get a black screen with only the mouse cursor and taskbar oeprational. I don't you items on the desktop and are unable to the period of office. Also, can not access to the records that either photos or documents or anything this either in the drive c. I managed to create another user account and I don't get the black screen. Only the other account. I tried the fix microsoft here and not good. I tried the SHIFT 5 times key trick and ease of access link and disabled windows reporting service error and the calendar. I ran antivrus and use avast in real-time. can anyone here help? I refuse to pay over the phone using Microsoft. again, I have 2 user accounts and one of them gets the black screen of death. The other is fine. It is also a vista 32 bit OS I use. Another thing is the mail and the internet to work in the account of the black screen. As I write this, I have internet and electronic mail. I need the destop back again once my files are there. Hope you can help me.

  Sincerely,

  Douglas

  Hi Mamluk,.

  You seem to have answered your own query...

  If a new user account works and one does not, then it is clear that the old user account is damaged.

  You can follow the instructions in the link mentioned to transfer all your files to the new account below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Then, it is recommended to delete the old profile without work.

  Kind regards.

  AM1984

• Pavilion g6 can not boot black screen of death...

  Hello

  I have a g6 2240-CA Pavilion which will not start upward.  I get the 'HP' symbol and a message about 'Prepare auto repair'... then it goes in the black screen of death.

  It runs Windows 8 (pretty sure its 64-bit version), System ID 1849 and ST9500325AS ATA Hard Drive.

  I ran to the verification of diagnosis for the (vast) memory and hard drive.  The memory test the HD failed.  Specifically the "HD SMART Check" success and failure "HD short DST Check" with the following details:

  Failure ID: Q4M8GW-6HV71A-MFPWW1-60WV03

  Product ID: C2N57UA #ABL

  Let me know if you need more info... Alan

  Hello

  According to test results, you posted, and it does not point to hard drive failure. Is your older machine for less than 12 months?

  In this cases aged under 12 months contact HP in your local area and organize a repair service.

  Checkurtech

• First white screen of death, now black screen on the internal, external screen works

  Hello

  a few months before I could not suddenly start my macbook more. He had the white screen of death and absolute no functionality in addition to its departure.

  A few days ago I got the macbook, open/close a couple of times so that it is operated and suddenly the keyboard LED lit and the screen

  turned black. I realized that he really started and connected to the external monitor. everything works fine now in addition to the internal display.

  I run Apple Hardware Test mode clamshell, but extensive testing even said that there is no material errors.

  can I conclude that my screen is not faulty? I thought it of the graphics chip, but wouldn't the AHT it detects then?

  Another thing to mention is that the battery should be changed (warning hint)

  I tried PRAM - & resetting the SMC without success.

  MacBookPro 13 "A1278 mid-2012.

  I would really appreciate any kind of advice.

  Thanks in advance

  Alex

  The symptoms you describe point to a faulty screen or display connection.  Make an appointment at an Apple store genius bar for a final assessment.  The event will be FREE.

  Ciao.