Cannot find my car with maps in iOS 10
Although I activated the option to show my location parking there is no pin code to my car parked in Apple maps or in the notification window (cards destinations).
I use an iPhone 5 with iOS 10.0.1 and connect the phone to my car via Bluetooth (not Aplle because play).
I disabled the option, and once again now and I restarted the iPhone.
Greetings, Walter Goodfellow and we thank you for using communities of support from Apple!
It seems that your iPhone on iOS 10 5s is not allowing you to take advantage of the new feature, "find your car". I'll be more than happy to help with this. Don't forget to try "Find your car" after each troubleshooting step.
1. How to back up your iPhone, iPad and iPod touch - I highly recommend you to make a new backup of your iPhone to make sure your personal information is safe.
2. reset the iPhone settings -, on your phone, go to settings > general > reset > reset all settings. This returns your iPhone settings to their default settings.
3. use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on Mac or PC to completely erase your iPhone. In the settings of the iPhone doesn't that erase your personal information.
First, select "Set up as new iPhone" and connect to iTunes and App Store and now iCloud. Retest "find my car". If she works continue with the last step.
4. restore your iPhone, iPad or iPod touch from a backup - follow the steps described in this article to replace your personal information on your phone.
Have a great weekend!
Tags: iPhone
Similar Questions
-
Install the Microsoft silverlight plug in. it's necessary to watch movies on my vista computer. When I try it is the message I get. Cannot find a volume with enough disk space for the file extraction. This is the message I get trying to watch a movie on netflix.
Hi cardsharkha,
I suggest you try the steps mentioned in the link below for cleaning broken Silverlight installation and check if the problem persists
How to manually clean a broken Silverlight installation
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
-
Cannot find a process with the name 'perl '.
Hey all,.
Tryign to configure the script in my dev environment and I receive the email ok, but does not get the report attached to the email... Here are the keys error I get with executing the script on the computer Windows 7 using PowerCLI 5.0... Thoughts?
___________________________________________________________________________
Get-Process: cannot find a process with the name 'perl '. Process audit na
me and call the cmdlet again.
C:\scripts\report.ps1:3 char: 18
+ $pp = get-process < < < < perl
+ CategoryInfo: ObjectNotFound: (perl:String) [Get-Process], Pro
cessCommandException
+ FullyQualifiedErrorId: NoProcessFoundForGivenName, Microsoft.PowerShell.
Commands.GetProcessCommandYou can not call a method on a null value expression.
C:\scripts\report.ps1:4 tank: 16
+ $pp.waitforexit < < < <)
+ CategoryInfo: InvalidOperation: (waitforexit:String)], Runti
meException
+ FullyQualifiedErrorId: InvokeMethodOnNullNew-Object: Exception calling ".ctor' with '1' or the arguments:"Could not find fi.
the "C:\scripts\vmware_health_check20110912.html". »
C:\scripts\report.ps1:8 char: 18
+ $att = new-object < < < < Net.Mail.Attachment ($file)
+ CategoryInfo: InvalidOperation: (:)) [New-Object], MethodInvoca)
tionException
+ FullyQualifiedErrorId: ConstructorInvokedThrowException, Microsoft.Power
Shell.Commands.NewObjectCommandException by calling 'Add' with '1' arguments: "value cannot be null."
' Parameter name: agenda.
C:\scripts\report.ps1:14 char: 21
+ $msg. Attachments.Add < < < < ($att)
+ CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
+ FullyQualifiedErrorId: DotNetMethodExceptionYou can not call a method on a null value expression.
C:\scripts\report.ps1:16 char: 13
+ $att. Have < < < <)
+ CategoryInfo: InvalidOperation: (available: String) [], RuntimeEx
reception
+ FullyQualifiedErrorId: InvokeMethodOnNullRemove-Item: can not find the path "C:\scripts\vmware_health_check20110912.html" be
cause, that there is not.
C:\scripts\report.ps1:17 tank: 12
+ Remove-Item < < < < C:\scripts\vmware_health_check$dt.html
+ CategoryInfo: ObjectNotFound: (C:\scripts\vmwa...ck20110912.ht
ml:String) [Remove-Item], ItemNotFoundException
+ FullyQualifiedErrorId: PathNotFound, Microsoft.PowerShell.Commands.Remov
eItemCommandThe script uses the Perl API and not the PowerShell. So the last SDK Perl install and be sure that your backup script as *.pl rather than *.ps1
Concerning
Joerg -
Windows cannot find any neworks with Wi - Fi
I have a Toshiba laptop that connects to the internet via a Belkin N router.
During an internet session, the laptop can lose connection and if I try to connect to a network I get the error message "Windows cannot find any network."
Nothing has been changed during the session.
Laptop computer shutdown and restart will allow the laptop to auto automatically reconnect to the preferred network.
My impression is that it is a software problem.
Hi kaspercat,
Rather than restart you tried the option "diagnose and repair"? Right click on the internet icon (two monitors flashing) in the notification area and in the menu drop-down, select diagnose and repair. This usually works fine for me if the laptop on my network loses connection.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com
-
Cannot find the 'endpoint' with 'RemoteObject' property in Flex 3
Hi all
I am uttering the 'RemoteObject' class object inside the class action script. I'm here
unabe to find ownership of "endpoint" with the remote object in Flex 3.0.I am currently using
the SDK 3.2.Earlier I used this property earlier in Flex 2.0.Can whole body sugget me what
is the replacement in flex 3 for this, or how to get this property.
In Flex 2.0
===========
var rm:RemoteObject = new RemoteObject;
RM.source = "ServerSideClassName";
RM.destination = 'amfphp ';
RM. EndPoint =http://Ip or server PC/ProjectName/amfphp/gateway.php;In Flex 3 (sdk 3.2)
==================
var rm:RemoteObject = new RemoteObject;
RM.source = "ServerSideClassName";
RM.destination = 'amfphp ';
Cannot find rm.endpoint here.Thnx in advance
Mayeul Singh BartwalHello Arnaud
I m not sure but I think you used the remote object from the package of «mx.rpc.remoting.RemoteObject» class
instead of "mx.rpc.remoting.mxml.RemoteObject. That's why is does not show property as the 'end point '.
To verify remote call from the package «mx.rpc.remoting.mxml.RemoteObject» with the object
May helps you
Thank you
Virat Patel
-
Context: Target cannot find the node with id 33
Hello
In my qml file, I used the spreadsheet component. When you click the button, I tried to call the RPC function that calls the web service and according to the response from the service web I have to redirect to special qml. But while qml opening of the CPP, I get the following errors.
libpng warning: iCCP: known incorrect sRGB profile Context: Failed to find target node with id 33
For a moment, I am able to redirect to special qml but control returned to previous qml.
I am not able to understand why this error came? When I run my application a day before it was working fine. When I reset the device and upgrade the operating system 10.2 I get this error.
Here is my code in the PRC:
QmlDocument *qml = QmlDocument::create("asset:///backgroundProcessImageFile.qml"); qml->setContextProperty("RoamAssist", this); AbstractPane *root = qml->createRootObject
(); globalApp->setScene(root); Hey... my problem is solved...
Insted to create the user interface using the sheet I just create new page and open it using NavigationPane.
I still don't know if this issue is due to the component of the roadmap or due to the os version upgradation.
-
Cannot find network cards with Vista
Hello
I have problems with my Dell Inspiron 1720 under Vista not recognizing one of my network cards. I checked that my modem and router work correctly (they are) but still my laptop will not pick up not my Belkin N1 router wireless signal or when I hard it wire as it says network adapters are not found. I had a series of reports of unusual message telling me that the 'State of dependency is unknown", and that I should try to restart the DCHP etc. I followed the instructions to the point where it says "Windows cannot fix this problem - contact your service administrator.
Any thoughts?
Did you check the status of your network adapters in the Device Manager? If they are disabled, try allowing them.
I hope I could help
-
Dear friends,
I'm using Windows 7 Ultimate 64 bitI'm really happy with the answers given on this subject, but after the installation of "WindowsXPMode_en - us.exe" and "Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu ".installation went well but I can't find any file on my computer with vpc extension, and I don't see the Windows XP Mode folder in Program Files.When I try to reinstall, I get the message that it has already been installed. In folder options, I enabled see all files including system files.Thank you!Thank you very much!!!
After I posted the question (and struggled with the issue for a while),I decided to uninstall Virtual PC and XP Mode, and then when I reinstalledthem everything was fine.In any case thanks for the elaborate and useful response which I'm sureothers will benefit from it. -
Cannot find the boxes with inlay of text that have been converted from Quark
Hi all. It's kind of a weird one. I have a lot of documents that have been converted to different versions of Quark to Indesign CS5.5. I need to find all the text boxes that have a 0.139 text inset, which seems to be the default for text boxes that have been converted from Quark that have text box. I'll find/replace, choose the command object and set my search criteria for spacing to insert at 0.139, leaving all other criteria being. He comes back and says no matches found. If I create a new document and test it, it works fine. Is there something that I am missing? What is a "bug" due to a converted Quark document? I tried to uncheck all the attributes object except inset spacing without result.
Doing this by hand is VERY time consuming as you might imagine.
Any help would be greatly appreciated.
The inDesign CS5.5, Version 7.5
Mac OS x 10.6.8
Bryan
I think that your problem is with your conversion unit. 0,0139 inches do not match one point PostScript (it is equal to 1,0008 PostScript points). You should try the same method you were using, but rather try to enter "1 point" as your search query.
-
Cannot find "" keys associated with certificates to create certificates p.12
Hi there, hope you can help. Eager to create Distribution certificates & developer p.12. Went through procedure at the point of a double click on "ios_development.cer" and "ios_distribution.cer" to install in Keychain Access.
I see that these certificates are in Keychain Access under System'Certificates.
However, Keys 'System' the relevant keys do not exist. And in Login 'Keys' there are 4 keys that might be good: 2 public keys, 2 private keys. BUT they do not have an arrow on the left so I do not see if the correct certificate is associated with them (as described in the step by step guide to DPS pg19).
Mac currently on 10.6.8 so I have not yet downloaded X Code. Planning to improve the system of short time. When I update and install X Code, so I'll be able to see the right keys and associated certificates together in "key"? Is there something that I missed? Hope you can help, thanks.
Xcode is probably irrelevant to this issue (even if you do not want to install an intermediate certificate at some point, either individually or with xcode). If you double-click the .cer file and the swirl arrow does not appear, it means that the certificate was not imported correctly. Try using the command import in the menu. If this does not work, delete and remove any that you have created and try again. For best results, close the Keychain Access utility whenever you complete a certificate p12.
-
HP Officejet 150 mobile, HP scan doesn't work (cannot find scanner)
Hello
I just bought a HP Officejet all-in-one 150 Mobile. I installed the complete software package (downloaded on the HP Site) bluetooth on a laptop Acer Aspire S5 for windows 7. Printing seems to work fine, but when you start HP Scan, I get the following error message:
Sane, the software cannot find the scanner with suggestions to resolve.
Is it possible to scan with a Bluetooth connection? Any other suggestions, what goes wrong?
Best regards
Roelof Crèvecoeur
Hello Roelof Crèvecoeur,
Scanning is not supported via a Bluetooth connection, only printing is available for connectivity also, you will need a USB to scan:
http://support.HP.com/us-en/document/c03137985
NOTE:Scan functions are not available through a Bluetooth connection. Scan functions are supported only through a USB connection.
-
This isn't the same problem as similar comments that relate to the inability to delete the folders that contain the zero byte files.
If I try to rename a file in my system, I get "Cannot find this item" with the choice of 'Try Again' and 'Cancel '. When I click 'Try Again', it always succeeds. -My system is not paralysed - but it is quite boring. I can even right-click on my desktop and choose 'new... '. Folder"and type a name, and I get"cannot find this item ". What is interesting is that the name of the element changes even before I click on 'Retry '.
If I have a folder named "Folder1" and I rename it to "Folder2", I get the error "Folder1" could not be found - that is in fact true, as it is already renamed "Folder2".
Why Windows 7 looking for the old folder name after renaming it? I also disabled AVG live scanner without result.
Any ideas or suggestions would be greatly appreciated.
Thank you.
I finally got.
I used the same solution for the similar problem in Windows Vista. Once I got to my company laptop, I exported this 2 registry keys.
Hkey_local_machine\software\microsoft\windows\currentversion\explorer\folderdescriptions
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\explorer\FolderDescriptions
Merged with my pc and this is!
The "shell" command also works again (ex: shell: staff opens the account folder)
I downloaded the reg file and you can get it here http://cid-fb5a28bc4a1cc9b6.skydrive.live.com/self.aspx/Public/Folder%5E_fix%5E_win7%5E_x64/FolderDescriptions.rar
This is for Win7 x 64. Use it at your own risk.
-
Cannot find how to install iPhoto om macbook IOS 10-7-5. New with apple
Cannot find how to install iPhoto om macbook IOS 10-7-5.
New with apple
Have you bought your Mac of opportunity? A new mac should have with pre-installed iPhoto, if the Mac comes with Mac OS X 10.7.5.
If the Mac initially had another system installed, look at the system installation discs, which belong to the Mac. On one of these disks should be an installer for iPhoto and other iLife applications.
If the original system of the Mac is Mac OS X 10.7, there will be no installation disks.
In this case look at the App Store, the fourth purchases tab, if you see iPhoto with a button I agree. Press this button.
If iPhoto is not visible on the purchases tab, the previous owner has accepted the pre-installed iPhoto already to the AppleID and may not be transferred to you. You can buy your own copy. Apple is no longer develops and sells iPhoto. Try buying an installer of iLife 11 on Amazon or eBay.
iPhoto 11 works most completely, however. The functionality of the site is longer supported on the Mac OS compatible version X 10.7.5, because Apple has only the support of Google Maps.
If your Mac is compatible, consider upgrading to Mac OS X 10.11. El Capitan and the use of the new Photos.app instead of buy a program that is no longer supported and developed.
The Photos.app installs automatically, if you upgrade to El Capitan.
-
IPod touch 6 is compatible with speaker portable juiceblock. Have tried looking on the Internet but cannot find a Yes or no. Thank you
Yes. This
D5U http://www.Amazon.co.UK/juice%C2%AE-square-Bluetooth-portable-speaker/DP/B00J2S3
says:
- Compatible with most devices with the A2DP Stereo Bluetooth®
and this profile is supported by iPod
-
Problems with the order of the music through car after upgrading to iOS 9.2.1
I use the iPhone 6, iOS 9.2.1 BMW 3 series and it's control of media (menus, different keys etc.). The iPhone is connected with a USB cable.
When the music is stopped on the iPhone, I can't start playing music with the controls of the car. I have to use the play button on the iPhone, to start the music.
I can control the application music with the controls of the car then. After the music stops, the music cannot play again, only with the play button on the iPhone. This isn't safe when driving... The problem occurred after the upgrade to 9.2.1.
I also have a model of bmw 3 2012 series, my iPhone 6 iso 9.2.1 does let me not even play music via Bluetooth. He also says that the USB cable is not compatible, it allows me to Bluetooth my phone but not my music, I need to plug thanks to the lead to play music, very frustrating
Maybe you are looking for
-
I just bought the latest iPad and now I have restored from a backup, it has been deleted and the songs at random out of my playlists for example a playlist, used to have 534 songs (I know because they are always on my ipod) and now he has 137. Why he
-
How can I find the IP address of my MacBook pro
How can I find the IP address of my MacBook pro
-
How to open files that I backed up on disk hard ext if it is saved in the bkf format?
-
My Advisor in charge of HP has stopped working, how to fix this?
I try to open my care advisor and it says that it has stopped working. I can go to my control panel and do things like that.
-
Java or adobe flashplayer, should I install everything first?
is one of these prominent?