I have a computer that came with "factory-installed" XP. I've updated to Windows 7 but to go back to XP. What happens if I uninstall Windows 7?

The computer has 4 or 5 years old - inherited my mother-brother aged 96 year.  I have none of the original installation disks.

you have an hp computer try this press and hold the CTRL key and press F11. then follow the instructions to reinstall xp. Do this when you turn on your computer

Tags: Windows

Similar Questions

  • I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

    I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

    How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

    Error loading \3\DLBUtime.dll

    I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

    I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

    Can someone help me with this?

    Aprilm,

    You are LuLu5119, who posted a question last August?

    If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

    Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

    In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

    Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

    Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

    Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

    If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

    As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

    MalwareBytes Anti-Malware: http://malwarebytes.org/
    SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

    For MalwareBytes Anti-Malware, download, install, update and run.
    For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

  • Got a laptop as a gift do not have the disk that came with it. I I get it?

    Got a laptop as a gift do not have the disk that came with it. I I get it?

    On Saturday, July 19, 2014 17:26:38 + 0000, Ramiboca wrote:

    Got a laptop as a gift do not have the disk that came with it. I I get it?

    Probably no disk came with it. Instead, you have a recovery partition.
    For information on how to use it, read the instructions or watch on the
    web site of the manufacturer.

  • I want to reformat, but I don't have any software that came with my pc

    I ' v had this pc for a while now and becomes slow and full on the problem, I would like to reformat. I ' v done on my old xp system but never with vista.

    I ' v had this pc for a while now and becomes slow and full on the problem, I would like to reformat. I ' v done on my old xp system but never with vista.

    See the documentation that came with your computer for the method that the manufacturer provided to reinstall the factory delivered.  They are required to provide sort and normally it's a partition on the hard disk (several times drive D but sometimes in a hidden partition).  The manufacturer of the computer will also provide a method to create a set of food DVD the computer also.  If you can't find the manual that came with your computer, then you need to access the web site of the manufacturer and find their documentation.  They will also normally have a place where you can buy media if you do not or cannot create our own.

  • I want to reformat Windows Vista but I don't have the disc that came with my laptop.

    I am using windows Vista and I need to reformat. But I lost the CD that came with the laptop when I bought it. What can I do to reformat with WIndows Vista original CD wthout?

    original title: Lost CD in windows format.

    Vista can be downloaded from here, it should work with your product key on the side of your system and phone activation.

  • How can I re install Windows Vista after upgrading to Windows 7? I don't have any disks that came with my computer reset.

    original title: what am I doing here? Help, please

    the computer that we originally came with vista home premium installed on with no disc reset and I want to change Windows 7 to vista, but I don't have the disk to reset for it, anyone know where I can get the drive, or if it would be possible to reset HP windows vista 7.

    and I have all the vista files in a separate hard drive

    I really need help can someone help me please

    Hi Jesse,.

    I suggest contacting the manufacturer of your computer to obtain the replacement installation discs for Windows Vista:

  • Can I use ANY XP Professional disc to reinstall the operating system on my computer. I have the thing professional XP installation sticker code on my computer, but do not have the disc that came with my computer.

    My C: drive boot sector is dead.  Now, I need to get a new drive C.  I don't have the original disc supplied with the computer.  I don't have access to an XP Professional Upgrade disk.  Can I use with the passcode on the sticker on my computer to install the operating system on a new hard drive?  If this is not the case, what should I do to get XP installed on my new hard drive.

    It is one thing for a replacement...  Thank you

    You cannot use your authentication code with a upgrade disk.

    See How to replace Microsoft software or hardware, order service packs and updates of products and replace product manuals .

  • How to restart a computer that came with windows already installed.

    I have a desktop with windows 8, which was installed by the manufacturer.  It crashed and tried to reload winows 8 of microsoft. Recovery usb I downloaded from microsoft was trying to restart windows 8.   Initial start-up asked me the windows KEY.  The key is loaded into the bios but is not visible.  How can I regain access windows KEY?  Thank you

    You're telling me that the manufacturer could not / refuses to send you the installation media to restore their computer to condition "as delivered"?

    Who is the manufacturer?  I know that Dell, HP, Lenovo, ASUS, Toshiba, etc all have them set up programs to help users specifically with (this installation/recovery to get to their systems support) as they agreed (in their license agreement with Microsoft) provide a method for the end user to do exactly this.

    In many cases the 8/8.1 Windows product key is embedded in the BIOS at the factory for these machines.  You could read here on some methods for such a key - but honestly - you shouldn't have it (must be able to skip that part in installation and always get installed.):

    https://itsolutionsblog.NET/3-ways-to-extract-the-Windows-8-product-key/

    Otherwise, unless you provide the computer name of such manufacturer...  Here is the process for gt these media for some manufacturers:

    Contacting OEM for recovery media:

    You * REALLY * use support for recovery of the manufacturer when possible.

  • I have lost my Windows XP Professionsla installation disc that came with computer and I see the message asking me to insert disk 3 to reinstall the files. What should I do?

    I lost the Windows Professional disc that came with the computer. I get a pop up requires me to insert the disc 3 of which I don't have the installation disc. Even if I try to do a system restore I need the disk. I can't lose information that is on the computer and do not have an external drive. What should I do?

    There is no disc 3 of Windows XP Professional.  Windows XP (other Media Center if I remember well) was a CD.

    Please copy the message down verbatim - including the title bar - and who post here.

    You can move this pop-up window on the side and also do all the following - in the order given anything of it periodically, you're already doing...

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used.  Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • My IllustratorCS4, iMovie and iNdesign CS4 that came with my computer when I bought it about 4 years ago does not work after I was informed by a representative of Adobe until this day my computer. I still have the programs on my computer. How can I get re

    My IllustratorCS4, iMovie and iNdesign CS4 that came with my computer when I bought it about 4 years ago does not work after I was informed by a representative of Adobe until this day my computer. I still have the programs on my computer. How can I get the re install

    If you're ready to uninsntall, then reinstall, you can download at the bottom of the link;

    Download the CS4 products

  • can't activate windows xp with the product key that came with the computer

    I got a computer of 510N HP Pavilion from a friend who was absolutely riddled with viruses and malware of all kinds.  Every thing I did to clarify apparently nowhere got done or made it worse.  At the end of the day, the computer would only begin to restart, stop after the start of the HP logo screen, then start to boot, etc and more.  All I could do was to install the hard drive in another computer and format, from scratch.  Now, I'm trying to install the system to XP op for the disc that came with the computer.
    the problem: the code the product key on the case went wrong with the disc.  After searching for solutions, I found a code on the disk by searching the files it contains, tried and it worked!  Problem is when I try to turn it on, it says it's an "unauthorized product key."  I tried to enter that code on the box and who says he is "invalid".  The Cd look authentic; are for distribution with new pc HP and Compaq.  After a further inspection drives are XP Professional SP2, while if it is XP Home Edition.  What gives?  Activation does not anyway. It is any use that will not make me buy a new set of disks?

    Please let me know if more info or detail is necessary.

    PS - only a single piece of hardware has been changed - the cdrom initially provided with the computer was bad, so I went out to perform the installation.

    When you perform a restore to the factory on some HPs condition you have two choices: 1) a restoration which keeps your data and programs (in a repair installation); (2) a full destructive restore which brings back the machine to the State, it's when you first opened the box. In your case, you have already wiped the drive, so the question is moot. I would call the HP technical support. Normally when you use an OEM recovery media (HP, Dell, etc.) a product key is never required during the restore. If you have used the media to restore HP shipped with your system and are always asked for a key and one on the sticker machine is not accepted, then something is certainly. MS - MVP - Elephant Boy computers - don't panic!

  • Uploaded image of Windows 7 Professional will not accept the product key that came with my computer.

    I have a Dell laptop, Studio, approximately 1 year, delivered with Windows 7 Professional installed - the label with the genuine product key is located at the bottom of the laptop. Shortly after I got it I deleted the recovery partition to make room for Linux installed next to Windows. I had problems with Windows system (mainly caused by me bad installation software and drivers without proper backups) so I decided to reinstall Windows. I had already deleted the recovery partition and wouldn't use it anyway because I prefer a clean system without unwanted from the manufacturer in this regard. I did not receive a Windows operating system installation DVD with my computer, so I downloaded a (64-bit Windows 7 Professional, the same as the original operating system) which already had SP1 on it (the version of Win7Pro installed Dell's not SP1). I installed Windows on this drive and attempted to activate using the product key that came with my computer, but it would not accept the key. I don't have time to try to solve this problem, but now the period of one month is up and my computer does not work correctly.
    I suspect that the problem may be due to me using the SP1 disc. If this is the case, should I reinstall Windows again? I have * NOT * GOING to buy another product key when I have already paid for a genuine version of Windows. I just want to be able to use my computer without the ridiculous slowdowns caused by pre-installed software and the way I chose.

    Thanks for any help with this problem, I really need fo fix my computer.

    original title: Activation error, Windows 7 Professional
    Windows product key: *-* - M3DJT - 4J3WC-733WD
    Windows license Type: OEM SLP

    The key to your report is your OEM SLP key which can not be activated. This isn't the key to COA.

    but the key I tried to use is what I copied on the COA the day I got the computer of the book where I put all the information on my computers.

    Is the product key in your book is the partial key in your report?
    You must change the product key to the one on your COA.
    Check your compartment of the COA.
    The other solution is to reinstall your Dell OEM recovery disks or recovery partition. This self will activate your computer.
    Additional information:

    Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

    (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

    (B) COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

  • Can I use the CD that came with my Palm Z22 to install on my new computer Windows 8 2005?

    I'm upgrading from a Dell XP machine on a computer Dell Windows 8.  My old Palm Z22 driver installation CD will work to load the software into my new Windows 8 machine; or do I need to download a new software specifically for Windows 8?

    After losing almost three frustrating weekends, I finally got my Z22 to synchronize with Windows 8.  You never answered my first question [can I use the CD that came with my Palm Z22 to install on my new computer Windows 8 2005?], that would have eliminated a lot of uncertainty in my many attempts to synchronize with the download of version 6.2 has recommended you.  Fortunately, I wasn't the original CD with version 4.2, because 6.2 has toured with a bit more clear instructions and a new download of http://www.palmdr.com/windows-7-64-bit-usb-drivers

    Thanks for your advice in any case.

  • Question about re - install the software that came with the computer

    I inadvertently deleted the controller Ethernet and Bus High Definition Audio my laptop while trying to remove the Real Player I downloaded. How can I get these? What do I need to use the recovery disk that came with the computer or y at - it another way? If I use the recovery disk will I lose data and other software on the computer?

    Thank you.

    Hello

    If you are lucky man you will be able to use the tool to clean Windows system restore.
    This tool allow you to roll back the State of the OS to the point of beginning.
    I think you can use it and try to roll back the OS to the point where you have removed these applications.

Maybe you are looking for