I have a HP Folio 13 1020US. One of the slim AC adapters are compatible?

Similar Questions

• I have a Kodak printer all in one, and the only thing I want to do is yellow ink. Can someone help me?

  I just put this new ink in my printer and print all my papers in yellow. I turned it off and waited, then walk back and I always get yellow ink.

  Hi vickiemullis,

  ·         What is the model of the printer that you are using?

  It seems like it might be a problem with the cartridge.

  However, try the following.

  Method 1: Run the next Fixit tool and check if it helps.

  Problems printing and printing errors

  Method 2: Check if the following might help.

  Printer in Windows problems

  Contact Kodak for help.

  Support home page - Kodak

• Binds a guest operating system to one of the two network adapters on the host computer?

  Sorry if the topic is confusing.  I have a host operating system to Server 2008 running on a server that has two network jacks.  Allows to call an (192.168.10.24) and B (192.168.10.25).

  My guest operating system is set to bridged with the IP 192.168.10.26 mode

  I want to say VMWare to always use A NIC when it comes with this guest operating system.  Is this possible?

  In my (Control Panel Windows) network connections, I see my two NICs A and B as well as VMWare Network Adapter WMnet1 and VMnet8.

  Thank you!

  Run the utility for configuring the network (vmnetcfg.exe) as an administrator on the host computer, disable the automatic bypass, set vmnet0 to one of your physical network cards and a virtual NETWORK adapter not used, such as VMnet2, and then assign the other physical NIC. Then to your comments, change its settings and select vmnet0 or vmnet2.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• I can't send mail to one of the two accounts of e-mail with the outgoing server.

  Recently, I was unable to send an email to one of the two accounts which are the two aol. One of them is netscape. They both use the same outgoing server 'smpt.aol.com' I've tried the suggestion to remove the password on behalf of netscape (the one I can't send). Now I get a 5.7.1 sender address rejected. I'm sure this is a settings problem and probably a dealing with passwords, but I just can't solve. Help!

  I checked both accounts and servers as you suggest. The first time he asked me, he said that have been rejected. When I pressed try again, it has been accepted, and now everything seems to work fine. Thanks a lot to you two. I really appreciate it.

• I had all my precious bookmarks and apps on the google toolbar and now with Firefox 5 I learn that the google toolbar is not compatible with firefox! Google is in the cloud. Have you cut us to the Cloud?

  On my previous Firefox browser I mainly used applications on the google toolbar, not Yahoo, one that is not as good as the google toolbar. Now, the google toolbar disappeared and when I tried to download, he said that it is incompatible with Firefox 5. I noticed there are a number of queries on this subject, but no solution found. I'm sure you can give an update to allow us to recover our toolbar with all our info stored. Otherwise, I might have to use IE.

  Many users have gotten the function of the Google toolbar again by installing the Add-on Compatibility Reporter. Google just needs to test the toolbar with Firefox 5 and change something in their code specifying the versions of Firefox with which it is compatible.

  Add on Compatibility Reporter: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

  You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

  • Adobe PDF plugin for Firefox and Netscape
  • Shockwave Flash 10.2 r152
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
  • Open the Adobe Reader program in your list of programs
  • Click Help > check for updates
  • Follow the instructions to update
  • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
• Download the full installer (If you have NOT installed Adobe Reader):
  • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
  • Use one of the links below:
    • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
    • See also the download link': http://get.adobe.com/reader/otherversions/
• After installation, launch Firefox and recheck your version.
• Update the Flash plugin to the latest version.
  • Download and SAVE to your desktop, so you can find the Setup program later
  • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
  • Once the download is complete, exit Firefox
  • Click on the installer, you just download and install
    • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
  • Launch Firefox and recheck your version or up to the download link below to test the installation
  • Download and information: http://www.adobe.com/software/flash/about/
    • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
    • Use IE to go to the site above to update the ActiveX to IE
  • Download manual installers.
    • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
    • Note the separate links for:
      • Plugin for Firefox and most other browsers
      • ActiveX for IE

• How would duplicate these anchors - or, how would do everything that I reflect on one side the other side?

  So I'm new to Illustrator and have begun to make a logo, one of the first things that I really need to know is how can I duplicate anchors - I know that I can mirror the forms but I don't want to continue to do that every time I change an anchor on one side... I leave you a screenshot for you show more clearly!

  Draw half of the shape, and then go to Effects-> deformation and transformation-> Transform...

  Check Reflect X and set the anchor point to the left and type 1 in the "copies".

  now, when you move any anchor point on the right, that happen on the other side

• Suppose we have sal, comm in flat file, but in the staging table that we have

  Hello
  
  Suppose we have sal, comm in flat file, but in the staging table we are totsal col.i need to give sal + comm totsal in ctl file.how I have to give.
  
  Can you please help on this.
  
  Kind regards
  Ramanantsoa.

  Have you tried with [BOUNDFILLER | http://www.orafaq.com/wiki/SQL * Loader_FAQ #Can_one_skip_certain_columns_while_loading_data.3F] option?

• [Folio 13-1020us] SD card reader stopped working suddenly

  For about a year, I had an SDXC card in the card reader integrated my Folio 13-1020us.

  It was fine until a few days ago. Then something that I was downloading it has not completed, which is how I noticed that he had ceased to work. Now, it does not appear in the drives in my computer, and it does not appear in Device Manager.

  In an older HP laptop, I can at least see the letter of the card reader and the name that I gave him, so I think that the card itself should be fine. But I don't see anything when I place it in the Folio.

  I have a feeling that the drive itself has failed. I'm out of warranty by a few months. What I have to extend my warranty and send it to get it fixed? I don't want to use an external drive, because I use the card as extra storage space.

  Operating system: Windows 7

  SD card: Mark PNY, 64GB SDXC

  If the card works on other PCs, the card is OK.

  It is regrettable that there is no diagnosis for the card reader PC Diagnostics UEFI test. You can. However, to run the test component from the system board.

  The next step in troubleshooting to make sure that the issue is not with the operating system, perform a recovery or a refreshment. Both of these measures involve delete all your data, so It is recommended that you copy all the important data to an external storage device before a refresh or a HP Factory image recovery.

  To the factory image recovery, you will need to call the HP Recovery Manager. Access Recovery Manager HP when you are connected to Windows or by using usb recovery media you should already have created now. Invoke the charm of the search and the type of recovery.

  

  If niether of these procedures did not have a positive effect, then the problem is probably likely to be a problem of Board of Directors system and internal. The only way to solve that resides at the center of Service HP.

• I have a single folio paid app and I want to migrate to a mult folio app with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi ap

  I have a single folio paid app and I want to migrate to an app of folio to multi with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi application?

  I'm sure that the only way to proceed is to make a free portfolio for all the world in your new application of muli-folio. There is no way to match the records of the purchase of an application with a new application that contains a folio.

  Apple wants to see at least one element of the library is available free of charge, in any case if the application has a utility when downloaded from the store anyway.

  Neil

• I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

  I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

  < email published by host >

  As you know that these are user forums, it is not a good idea to post your e-mail address on a public forum - I asked the host to remove it.

  What "information" do you want to go? You can transfer iTunes downloads to another account, or to merge accounts - all downloads are permanently associated with the account that has downloaded (if only this account can potentially re-download purchases, downloads of updates of its applications, authorize such purchases on iTunes from the computer, and make in-app purchases in them).

• I have a file svg 1095 bytes that works in chrome, but Firefox and Internet Explorer Remove somehow one of the components, you can solve the problem?

  The bottom rectangle is missing, if I change the top of this rectangle invisible 1 pixel upward or down it becomes a 1 pixel line, very strange.

  <?xml version="1.0" standalone="no"?>
  <svg width="3cm" height="3cm" viewBox="0 0 1000 1000"
       xmlns="http://www.w3.org/2000/svg" version="1.2" baseProfile="tiny">
    <title>Genetics Logo</title>
    <desc>Genetics Logo</desc>
  
  <mask id="circles">
    <rect fill="white" width="100%" height="100%"/>
    <circle fill="black" cx="846" cy="800" r="170"/>
    <circle fill="black" cx="500" cy="200" r="170"/>
    <circle fill="black" cx="500" cy="600" r="190"/>
    <circle fill="black" cx="154" cy="800" r="170"/>
  </mask>
  
    <polyline stroke="black" stroke-width="140" points="154,800 500,200" mask="url(#circles)"/>
    <polyline stroke="black" stroke-width="140" points="846,800 500,200" mask="url(#circles)"/>
    <polyline stroke="black" stroke-width="140" points="154,800 846,800" mask="url(#circles)"/>
  
    <circle class="CtlPoint" cx="154" cy="800" r="130"/>
    <circle class="CtlPoint" cx="846" cy="800" r="130" />
    <circle class="CtlPoint" cx="500" cy="200" r="130" />
    <circle class="CtlPoint" cx="500" cy="600" r="150" fill="#C00"/>
  </svg>

  Imagine that the lines had no stroke. The top two lines are tilted so that if you drew a box round them aligned to x and there axes would not empty.

  The bottom line is horizontal. If you exclude his race-width of the rectangle enclosing has no height.

  It turns out it's important!

  You do not specify one attribute maskUnits so the default is used http://www.w3.org/TR/SVG/masking.html#Masking which is objectBoundingBox and it turns out that this (http://www.w3.org/TR/SVG/coords.html#ObjectBoundingBox) is incompatible with forms that have no framework encompassing.

  The specification SVG that specifically said...

  Keyword objectBoundingBox should not be used when the geometry of the applicable element has no width or no height, as in the case of a line horizontal or vertical, even when the line has actual thickness seen due to having a width of line not zero as the width of the line is ignored for limit box calculations. When the geometry of the applicable element has no width or height and objectBoundingBox is specified, then the given effect (e.g., a gradient or a filter) will be ignored.

• I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version

  I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version. Without losing all my favorites and the saved passwords?

  Yes, see this article:

  • Import bookmarks and data personal from another browser

  After:

  • Update to the latest version of Firefox

• FF jump between tabs if I have several open at the same time and it sometimes seems to be trying to load the same page one above the other

  When running FF for awhile, it starts to jump between different tabs I have open without clicking anything whatsoever. Also, it will sometimes appear that another copy of the same tab I have open try to open again at the top of page. The address bar that appears at the bottom of page loading will appear one above the other and the page will jump up and down about a 1/8th of an inch. Out of the enclosure, then by restarting FF does not solve the problem. I have to restart the computer and then restart FF for him to quit.

  I changed to Chrome and it doesn't, but I prefer the FF browser so I can get this fixed number.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list.

  I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4

  Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see.

  You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message?

• Is it safe to have it checked by my macbook and repaired in one of the distributors in Dominican Republic, using my one year warranty Apple?

  May 2015, I bought a MacBook Pro in New York. I loved, but yestarday, April 2016, out of nowhere, the screen has decided to go all crazy. She has never fallen, or drowned or had any kind of accident. I live in Dominican Republic so I can't take it to an Apple store. The only thing I can do is bring to one of the Apple here distributors in the country. I want to just make sure that it will be in good hands and it will be fixed. They guy at the store iZone said it might be a manufacturing problem and that I still have my one year warranty we free repair. But still, it is safe to do in a store that is not exactly "Apple"?

  The Apple store closest to me is about 150 miles. I use an authorized Apple dealer, and they make my warranty repairs. Never had a problem.