No start after the sp3 of Windows install

Similar Questions

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Lightroom does not start after the upgrade to Windows 10, Version 1511, 10586

  Hi all

  After the upgrade to Windows 10, 1511 Version, lightroom 10586 CC can't be launched. Adobe cloud nor any link office or file system path to the files directly program. Lightroom.exe can be seen in the Task Manager for a second and then disappears to nirvana. No answer, no trace.

  What should do?

  standard things as uninstall - re - install, stop between the two, log out of the clouds - connect to the cloud, register of audit were made in several variants without success!

  Kind regards

  Robert

  Thank you hipolitorodrigues,

  your answer showed me the way. I found a solution more simple in a parallel thread, whose response brought back LR to life.

  CU, Robert

  8  re: does not start Lightroom CC

    

     Tanuj Sandal   14.12.2015 19:41 (als Antwort auf: antonk97314826)

  Go to the Panel, then programs and features.

  Please select Microsoft Visual C++ 2012, 2013, and fix it.

  Restart the computer and then let me know if the application works.

• Windows XP mode virtual machine does not start after the upgrade to Windows 10

  Hello

  After the upgrade to Windows 7 Pro for Windows 10 Pro, my virtual Windows XP machine (which was created from the "XP" mode in Windows 7) no longer starts.

  It shows:

  This system is not allowed to run "Windows XP Mode". Now, the virtual machine will be turned off.

  How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

  VMware Workstation 12.1

  Hello

  How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

  I fear that the statement is pretty much on the mark.

  Microsoft caught only supported XP Mode in Windows 7, it has been since Windows 8.

  See also:

  https://support.Microsoft.com/en-us/KB/2724115

  You might be able to extract the folder integer vhd it and import it in VMware Workstation as a separate virtual machine. In the end, 'XP Mode' just was running a virtual machine in your Windows 7 after all.

  --

  Wil

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• Satellite Pro L850: ATI Catalyst was able to start after the update of Windows

  Satellite Pro L850 with Windows 8 Pro 64 bit running OK with default Toshiba Catalyst Control Center and the 8.982.10.6000 video driver version. Video chipset is AMD Radeon HD7670M.

  This week, Windows Update offered an update of WDDM1.2 for HD7670M video driver to version 9. I thought it was OK to install it, as he came formally to Microsoft. The updated video driver installed OK.

  After a reboot everything works perfectly except the specially modified Toshiba Catalyst Control Center. CCC reports that "there are currently no parameters that can be configured using Catalyst Control Center". After that I drove back the new video driver version 9 to version 8.982.10.6000, CCC started working again.

  I checked for my laptop model Toshiba product support page, but it is not a new CCC by download. Toshiba will never be released a new CCC that works with the new Microsoft video driver? What alternatives are there?

  As far as I know these drivers are offered as option drivers and you should not install them. Stay with the original drivers. Don t update a driver offered through Windows update.

  Have you tried to roll back the OS to an earlier time before this update has been installed? If it does not do it and check the functionality.

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pavilion HDX 16: Windows 7 does not start after the upgrade to Windows 10

  Hello

  I have a system to dual-boot with windows 7 and ubuntu (with Windows 7 and NeoGrub Bootloader Windows Boot Manager).

  Recently, I upgraded from windows 7 to windows 10 via free upgrade offered by SM. However, I didn't like windows 10 and tried to upgrade to windows 7 by the following settings-> update of the security & -> Recovery-> Go Back to Windows 7.

  After the long process of decommissioning, cannot start windows 7 and the "Startup Repair" tool began to run. However, he could not solve the problem. Other recovery options 'system restore' and 'image system recovery' is not such that it could not find any restore point or the image created previously (I'm sure it were created before upgrade restore points).

  So, although I can boot ubuntu without any problem, I can't start windows 7. After the "starting windows" screen, I get the blue screen (a problem has been detected and windows has been shut down...).

  I intend to use the DVD to install windows 7 for repair, but

  (1) I don't know if I can boot from the CD because it is a dual-boot configuration

  (2) I'm afraid of losing work ubuntu OS.

  I appreciate if someone can help me find my Windows 7. I thank very you much for your time.

  Sorry, but there are a lot of reports on forums of Win10 the option of GoBack does not always work correctly.

  You should be able to boot properly from the same DVD of Win7 if you dual-boot with Ubuntu, but be aware, if the startup repair works (you may need to run three times), it will replace the link to start Linux in the MBR and after that, the machine starts immediately to Win7.  You will need to reinstall GRUB to get Ubuntu boot back.  You may be able to fix the boot of Ubuntu using repair boot: Boot-Repair - Community Ubuntu Documentation

• Unable to start after the installation of Windows updates

  original title: windows update 10/11/2011.

  When I install the updates above that my pc does not restart, I restore it to before the update and my itunes icon disappears.

  I installed both times and the same thing happened twice, am now a little worried if you want to try again or what to do next.

  Any help would be greatly appreciated, but nothing technical massively please!

  Thank you

  Nigel.

  Hello Nigel,

  I would recommend installing either of these updates at the same time until you see this behavior.

  When this occurred, use system restore to go back to when the last update was installed and can hide the update, which is the origin of the problem.

  Best regards

  Matthew_Ha

• HP Pavilion Notebook 15-p050ca: graphics driver error message started after the upgrade of Windows 10 model installed on #: G6U13UA #ABL

  I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."

  I checked my graphics driver and it says that it is up-to-date.  I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem.  An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.

  I also tried the Intel and HP driver update utility and told me that my drivers are up to date.  However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."

  I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade?  Advice or opinions would be appreciated!

  My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279

  I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.

  I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver.  I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.

  I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).

  With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel?  If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.

• Gateway 7330gz does not start after the installation of Windows XP SP2

  Gateway 7330gz had a hard drive failure, so installed new hard drive (160 GB drive), file a copy of XP Pro, starts without a problem, pulled down to XP SP2, saved on hard drive, run SP2, and it installs without warning and restarts.

  Then goes into loop.  Download the gateway splash screen, The Win XP logo comes up and the progress bar is on 2-3 loops - gateway splash screen, repeat... If I F8 for boot menu selections, I can do a safeboot with networking.

  I reformatted and reinstalled XP added once again, all the appropriate drivers I can find to remove yellow? in the Manager list of device without change.

  There are only XP Pro on the machine when I start - absolutely no other software package has been installed, no external devices are connected.

  My plan was to drop XP Pro, SP2, and SP3, (updated IE along the way) and add MS Security Essentials. Then pick up all the other patches since SP3 before you add any other software.

  Thoughts on why the boot failure after installation of SP2?

  Solution found

  In BIOS advanced together to the top was an option called INTEL speed step

  Disabled the option and restarted in SP2 with no problems.

  Adding SP3, MS Security Essentials with no other problems...

• Computer will not start after the installation of Windows Vista SP2

  
  After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer.  Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair.  Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair.  No chance that the machine always fails to start and always displays the window "Statup repair."  Auto repair is always unsuccessful.  Repair suggestions will be appreciated.  Thank you.  Bob G.

  Support Microsoft still offers a FREE support for Vista SP2.  Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Latitude E5510 not start after the installation of Windows 7 64 bit

  Hey all,.

  Recently, I tried to install Windows 7 on my brother's cell phone to try to update to Vista. The installation went well, but when he tries to restart for the first time, the screen remains empty without having to start. I tried to format the drive and try again and still nothing.

  No idea what it could be?

  Silas

  Hi Silas,

  My apologies for the late reply.

  You can check the SATA operations in the system BIOS. Move operations SATA AHCI to ATA or vice versa, as shown in the image below:

  

  Also be sure to remove all external devices connected to your computer and remove the SD card in it if connected.

  See if it makes a difference.

• C55 satellite does not start after the upgrade to Windows 10

  I have the Satellite C55 and love it.

  How ever I did upgrade windows 8.1 to 10 and when I turned off my laptop.

  the next time I tried to use it, I had no bootable files so I used my USB that I did but I am faced with two options of connection of windows that won't let me or another something logon user domain etc., a friend told me to hit the windows and R at the same time this shows several tabs option but I don't know what I'm looking for that help on these tabs.

  I am disabled and rely on my laptop for all things in the company to shopping for groceries etc. Can someone help me to understand.

  Oh and TY to my friend for letting me use his laptop to post this here.

  When I look at the screen is blank image icon where my picture should be, I go to sign in to Microsoft and it says I have to be online. But I can't put to go online, it doesn't do anything when I connect the cable from the router to the laptop. I am hopeless when it comes to computers. Y at - it something I don't or something, I should be doing that I'm not please someone can help me. If there is I would like to warn you, that you need the patience of a saint like as I said that I don't know when it comes to computers. Thank you in anticipation of someone who has the courage to help LOL