HP USB Flash Drive v155w not detected by my laptop

Similar Questions

• HP envy j110tx: my flash drive does not detect in the hp j110tx start menu

  When I m trying to install windows usb 8.1, my USB is not detecting in my laptop boot menu like j110tx.

  But detects the USB even in my pc another and it contains the bootable file and it is lodable too

  I've looked everywhere but I have nothing, so please help me

  Hello:

  You have created Windows 8 or 8.1 Installation USB Flash Drive with UEFI?
  http://www.eightforums.com/tutorials/2328-UEFI-Unified-Extensible-Firmware-Interface-install-Windows-8-a.html

  http://www.eightforums.com/tutorials/15458-UEFI-bootable-USB-flash-drive-create-Windows.html

  Concerning

  Visruth

• 16GB USB flash drive does not not on Satellite L300-11F

  Hello

  I have a laptop Toshiba Satellite L300-11F. It comes with 2 USB ports.
  I have a pendrive plus 1 GB and all recently bought a Maxell 16 GB USB key.
  The USB works flawlessly at work, desktop pc, but doesn't seem to work with the laptop.

  I managed to use that only once since the USB port of the laptop simply does not recognize.
  I can tell that the Red led does not Flash and the Flash DRIVE is not accessible.
  I tried to use the hub USB Toshiba provided, no chance either :(

  2 USB ports are ok I use mouse, digital camera with her.
  Is the 16 GB USB key, it works perfectly with other machines. * desktop pcs *.

  I'm missing a few USB drivers or what is the problem?
  Please help I need to be able to use the device on the laptop too.

  Thank you!

  Blaze

  Can you use a Flash DRIVE with a lower capacity on the two USB ports?

• USB flash drives do not work

  Hi all

  I have a couple of USB flash drives. I recently got a new computer and none of them work. They work on a computer with Vista and a Macintosh running leopard OSX. I tried to install the drivers for them, but they do not work. I tried to uninstall the from Device Manager, but they don't always work. Also, one of them appears SOMETIMES (very rarely) and when he does works incredibly slow and unresponsive so. I searched the internet for each method I can find, but nothing yet. And they work very well on other computers. Can I use bluetooth USB and a USB mouse and pregnant too much work, but the sticks of memory will not work. Also do they not appear on Device Manager. I have Service pack 3 2002 edition came with the computer.

  Hello Hasan516,

  Thank you for your message.  Have you tried formatting of thumb drives?  If you have data on them, you will need to copy these data to a computer first.
  If you can see the drive but not access it under XP:
  Open 'My computer' > click the drive and select "format...". »
  When the Format window opens, scroll down the "NTFS" file system, and select 'start '.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• USB flash drive will not format

  Dane Elec 16 GB USB drive flah.

  When inserted, it tells me that it needs formatting. But I can not format, because somehow, it is write protected. However, there are not switch or any possibility of mechanics to remove the write protection.

  I tried unlocker, formatting to ntfs (with XP, Win7, and BACK), but nothing works.

  Any suggestions?

  Groet puts goede Rob

  Hello

  Have you tried to format your USB key, but instead to use NTFS you use FAT 32?

  Click on windows start orb
  type cmd and do a right click and select run as administrator
  type diskpart
  disc type list
  Select the drive that is your USB. For example, if your USB is no disc select 2 then type 2
  clean type
  type create partition primary
  Type format fs = fat32 quick
  Type exit

  Now see if it finally formatted your USB Flash drive

  Kind regards

  Andrew

  Always "vote as helpful" for those who helped and 'mark as answer"If the info helped you in a sort of way. Thank you, Andrew Young - MCTS Windows 7, configuration

• USB flash drive has not not found on the computer

  Original title: Flash Drive operations

  They gave me a flash driver allows to display certain information, I put it in my USB Port, it lights up, but nothing appears on my screen to indicate what he. I went to the computer, but do not see

  any removable device for a flash drive option. How to open this to display information on the USB

  Hello

  1 have USB flash or external drives readers have worked on your computer?
  2. what operating system is installed on your computer?
  
  Method 1:
  You try to run the Fixit.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  If you are using Windows 7, you can follow the methods mentioned below.
  Method 2:
  Run the troubleshooter of material and check what is happening.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   
  Method 3:
  You can check under diskmgmt.msc, whether or not the USB received a drive letter. If not, then try to assign one and check. Follow the steps.
  (a) open computer management by clicking the Start button, clickControl Panel, clicking system and security, clickingAdministrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, click disk management.

  (c) if the flash drive recognized in disk management and if there is no drive letter assigned, I suggest that you do a right click on the drive and assign a drive letter.

  (d) click the drive to change and then click change drive letter and paths.

  Do one of the following for the assisgn drive letter.

  • For letter an if it has not already received, clickAdd, click the letter you want to use and then click OK.
  • To change a drive letter, click change, clickassign the following drive letter, click the letter you want to use, and then clickOK.
  • To remove a drive letter, click Remove, and then clickYes to confirm that you want to remove.

  Check this link for more information:

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Method 4:
  You can also check in the Manager of device if the device is in the list.
  a. connect the device to the computer.
  b. to open Device Manager, type devmgmt.msc in the start search box and hitEnter.
  c. check if the device drive is listed.
  d. in Device Manager, expand the device listed in the device list.
  e. If the device is listed, right click on it > click Properties.
  f. in general, look under device status for the message. After back if there is no error message.
  See also:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device
  
  Method 5:
  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.
  
  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:
  (a) click Start and then click Control Panel.
  (b) click System and Maintenance, click System, and then click Device Manager.
  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.
  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.
  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following link for assistance.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  I hope this helps.

• Flash drive is not detected

  Original title: Flash drive problem

  I got my player wiped clean flash caused by a virus. Now, when I insert the disc nothing happens. I am not very informed when it comes to these things, but I thought that my data would be entered on the drive again, just like the first time around. Made null and void by car when I had the deleted info?

  I have a laptop Compaq Presario with Windows Vista Premium. Also, I just had the motherboard replaced, but I don't think it would have something to do with it. I appreciate your help!

  Thank you
  Elda

  Hi Elda,

  Thanks for posting the question in the Microsoft Community!

  The USB is not detected.

  1 have you tried in different ports?

  2 are you able to use other devices USB?

  I suggest you follow the steps:

  Method 1: Run the fixit

   

  See the site:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Then, as all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the steps:

   

  a. click Startand then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click on to expand Bus USB controllers, right click on the controller host, click on uninstall and click OK.

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. repeat the substep c to uninstall all items under Bus USB controllers.

  Now, restart the computer, and all USB controllers will be installed automatically.

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• USB Flash drive does not work with Windows 7 Pro 64-bit

  I have several USB thumb drives, some of them do not work when I plug them in while others work very well. By experimenting, I reduced the problem with the 64-bit Version Windows. All of these USB keys works well in my other computers that have 32-bit installed and also even computer with the 32-bit version installed on different hard drive. All of these thumdrives are detected immediately and works without a problem. The 64-bit version, I have uninstalles and reinstalled readers, drivers updated for readers and controllers USB chipset, reasigning letter drive without a resolution of the problem.

  It is interesting to know that this problem only occurs with some discs that I (like Ativa 4 GB, 4 GB generic and Verbatim 4 GB). While I discovered that you can do all the nonworking day thumdrives work once if you shutdown computer and plug the thumdrive into the USB port and the computer to boot, boot time is longer than usual and when it is operational in 30 to 45 seconds drive appears in the list of devices and you can read, write and format normally without any problem to experiment. When you pull chase him and reconnect to USB port after 10 seconds same problem appears aggai. First of all, you get the message that the disk must be formatted and if you try to format you will get a message that windows cannot format the drive. If you try to access the drive, you get message that Drive is not accessible. If I take this player and plug it from 32-bit without problem, you see all the files in the drive and are able to read the writing and the format is normally.

  I'd appreciate if I am able to get an answer as a way to solve the problem.

  Pavan

  When you disconnected the battery of the laptop, you did, be sure to press and hold the power button for about 10 seconds?  This causes the rest of completely discharge power.

  This tip came in practice more than once in my experience.   ^_^

• SanDisk Cruzer Mini 512 MB USB Flash Drive is not recognized on Windows 7

  When I plug my USB drive inside fails to update the driver. Is there anyway that I can download the driver manually?

  Hello

  You meet other USB problems on this system. The Cruzer works on other computers?

  Check with SanDisk support because they have excellent online support, including live Chat and documentation.

  SanDisk - Support
  http://KB.SanDisk.com/app/home

  See also the appropriate bodies of SanDisk:

  SanDisk - Forums
  http://www.SanDisk.com/SanDisk-support/forums

  Cruzer not recognized by the PC
  http://KB.SanDisk.com/app/answers/detail/A_ID/10/kW/Cruzer/r_id/101834

  ===========================================================

  Other troubleshooting methods:

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• AT300 - USB flash drive does not work

  I have a 16 GB at300. I try to plug in a flash drive with a micro usb to usb than female but adds nothing.

  The cable works with any other device. How can I use a flash drive with my AT300?

  Hello

  You need a special microphone USB OTG (on the go) cable to connect an external USB device.
  You can also try a Micro-USB On-the-go USB 2.0 OTG Host-Modus-cable adapter for
  I found a few online shops internet or amazon.

• Iomega Dx HD scenario is a 1 TB USB hard drive is not detected. USBSTOR.inf_bb2778a0 is Windows Xp SP3.can some a guide miss me on this

  IOmega screenplay reader Dx-1 TB hard disk HD media detects not in Windows Xp with Sp3.

  On the group network appliance is seen with the IP address.
  need USB mass storage device driver USBSTOR.inf_bb2778a0.
  can anyone guide me on this driver download?

  XP should come with the standard drivers for mass storage devices.
  One of the best sites I've seen for USB problems is the following:

  "Troubleshooting for USB Drives.
    <>http://www.Uwe-Sieber.de/usbtrouble_e.html >

  I think that your problem is covered by the paragraph about 1/2 at the bottom of the page titled «Asking XP drivers»

  HTH,
  JW

• USB flash drive does not appear in my computer on XP

  but he is assigned a drive letter in the management of devices. If I right click on the drive in the device management, it goes to the folder in Explorer
  but then disappears

  Hi gstercea,

  Thanks for posting in the Microsoft Communities. The problem description, I understand that the USB does not appear. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  I suggest you follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Let us know if you need more assistance.

  Thank you.

• does not detect not USB flash drive? __

  USB flash drive does not detect not?

  Hi AwaisAmarQazi,

  ·        He recognized before?

  ·        Do you remember recent changes made to your computer before the show?

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the name of the device

  2. try the steps lying in the link below: why my computer doesn't detect my new USB device when I run Windows XP or Windows Server 2003? :http://support.microsoft.com/kb/314634

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB flash drives not error 39 working -.

  Original title: USB flash drives doesn't work do not

  Hello
  My USB flash drives do not work in one of my USB slots. All other USB devices work correctly.
  Device Manager displays a yellow triangle with an exclamation mark next to the hard drive
  Have tried to update the drivers but points out the best drivers already installed.
  Connection drive after that a restart prompt message "driver installation", followed installation failed, error 39.
  I installed the latest drivers for the chipset of my Board.
  I have the Nations United-mounted and re-installed readers all affected.

  Grateful for the help, please.

  conx82

  Hello

  Have you tried the thumbdrive in another computer to be sure that it is still viable?

  ----------------------

  Try a restore of the system back to until the drive disappeared.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances. (There may be none.)

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I got Windows 7 and when I plug it does not recognize a sandisk to my pc USB flash drive

  I got Windows 7 and when I plug it it does not recognize a drive flash USB San-disk on my PC, all the other brands are. Can someone help me?.

  Hi Martin,.

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that a USB SanDisk flash drive is not detected on the computer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To resolve the problem with the connection of a USB flash drive, I need more information:

  1 have you tried plugging the machine into the other USB Ports?
  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to connect the USB device to another computer and check if it gets detected. If this is not the case, this could be a problem with the USB device.

  Method 2:
  If the USB device is detected on another computer, you can run the hardware and devices Troubleshooter and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:
  I suggest you try the procedure described in the article and see if it helps.

  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Check the link for more information.

  Install, view, and manage your devices and printers
  http://Windows.Microsoft.com/en-us/Windows7/install-view-and-manage-your-devices-and-printers

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.