I have a hp pavilion dv7. I get a blue screen. What should I do?

Similar Questions

• I have a HP Pavilion dv7 and my agreement now bad hard drive to the Geek squad. Do you know where I could buy the recovery disk?

  I have a HP Pavilion dv7 and my agreement now bad hard drive to the Geek squad. My problem is that I'm not able to find my recovery disc and HP has no more of them. Do you know where I could buy the recovery disk?

  The official win7 ISO images can be downloaded here;

  http://www.w7forums.com/official-Windows-7-SP1-ISO-image-downloads-t12325.html

  You download the version installed on your HP, burn a dvd using ISO, software, the burning at the slowest speed, on quality discs, then install it using the Win Key on the label on your PC.

  You will then need to install specific drivers of HP, not of the preinstalled HP software will be at your disposal

• Hi I have a brand new HP pavilion dm1 and I get a blue screen: BUGCODE_USB_DRIVER

  Since I started using my new laptop I randomly get a blue screen that says: BUGCODE_USB_DRIVER. The other info I got is the following:

  • OS version: 6.1.7601.0.1.0.768.3
  • Locale ID: 5130
  • Collection BC: fe
  • BCP1: 0000000000000008
  • BCP2: 0000000000000006
  • BCP3: 0000000000000006
  • BCP4: FFFFFA8004860000
  • Service Pack: 1_0
  • Product: 768_1

  I am using Windows 7 64 bit
  I don't know what to do. The only suggestion I got it that allow the system to restore everything as it was by the manufacturer. And I did it, but the problem has not been fixed.
  Can you help me please?

  If it is a brand new computer, you should immediately bring her back to your place of purchase or contact HP for repair or replacement.

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it.

  I get the blue screen with the exception of system Service in Windows 8.  It seems that many people have of it.  I can't use my computer without losing all the data every few minutes.  It is brand new.  Fix?  It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.

  For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.

  Many users report the same error recently and so far have all AMD/ATI graphics cards.

  If all goes well the graphic driver update will help.

  If the problem persists, consider uninstalling 2778344.

  Then, at the moment, 'hide' 2778344.

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• I bought and am download creative cloud and it takes forever? It was 40 minutes and I have DSL. Also I am gets mixed messages on what Mac OS, I need to do this... I have 10.6.8

  I bought and am download creative cloud and it takes forever? It was 40 minutes and I have DSL. Also I am gets mixed messages on what Mac OS, I need to do this... I have 10.6.8

  You might be found wanting for all Cloud applications.  Here are links to some of the requirements of the system.  If the programs you want to use is not in the list you can find the same way I did the Google search using "name of product system requirements.

  The system configuration required

  Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

  After Effects - http://helpx.adobe.com/after-effects/system-requirements.html

  Photoshop - http://helpx.adobe.com/photoshop/system-requirements.html

  InDesign - http://helpx.adobe.com/indesign/system-requirements.html

  Flash - http://helpx.adobe.com/flash/system-requirements.html

  Illustrator - http://helpx.adobe.com/illustrator/system-requirements.html

  Dreamweaver - http://helpx.adobe.com/dreamweaver/system-requirements.html

• I get a blue screen after installing windows7

  I have intermittent blue screen of death after installing windows7 home premium on Pavilion m9040n. Can anyone help?

  It is indeed a clean install of windows 7. Thanks for the reply, I solved the problem. The problem is I have a Hauppauge winTV TV tuner card is installed and cela mucks the other pilots on this installation. Everything went well after I got rid of the TV card. It seems that hauppage isn't a suitable driver for their card and windows 7 install their WDM driver for him and it does not. When I try to use the TV card and not a few seconds later, I get a blue screen of death and fans try to work overtime for an unknown reason.

• I get the blue screen of death, I do before going to the Geek squad?

  I get the blue screen of death, I then close my pc and restart in safe mode and then trouble shoot. I can then restart normally and then it is fine for awhile. I don't always have to be on the internet to get the blue screen. I have AVG and super anti-spy ware and run full scans and they say that there are no threats. So what else can I try?

  Messages you receive when you restart the computer, more a review of the event viewer should help you determine what is causing the BSOD.  The BSOD is not necessarily related to malicious software.

  You have posted in the forum for the forum of anti-malware for Microsoft Security Essentials (MSE).  Since you're using AVG, your post is off-topic for this forum.

  You can expect from a forum moderator move your message or if you want to, you can seek assistance in search and/or post in the appropriate Forum Windows:

  http://answers.Microsoft.com/en-us

  Kind regards...

• My computer date deadline and I get a blue screen message

  My computer is less than 60 days old, and now for a week, he stops (crashes) at least once a day. When I reboot, I get a blue screen message. I have vista with all kinds of measures to protect against viruses and worms. Automatically, it downloads and installs the updates daily and other than that I have not downloaded or installed anything from the internet.
  Microsoft Geeeeeee, I am not a Curmudgeon and don't know how to fix my machine. I just need (and wait) a reliable system that works! What is the problem and how to fix it? Thank you.

  Thank you very much for your answer, but I have read far more after my post and understood how to correct the problem. Microsoft has created two UPDATES of BAD August 27. in safe mode and I went to my control panel, see updates, uninstalled the 2 bad edits. I don't remember the exact numbers, but one was 36xx and the other was 29erxx.  Now, my computer is fine. If anyone who reads this message is having the same problem, go to the blue screen and updates of messages to read on how to solve the problem.

  How is BTW, that microsoft has put 2 updates of bad anyway? You should be ashamed for causing problems for your customers!

• Why what I get a blue screen on my laptop, and then it restarts

  Remember - this is a public forum so never post private

  Ideas:

  • Why I get a blue screen on my laptop and then rebootingPrograms with the fact that you have problems
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  § What is the exact error message that you encounter the blue screen?

  § East - this happen randomly or whenever you access any program on the system?

  § Remember to make changes to the system?

  § Since when are you facing this issue?

  Give details, so that we can help you in a better way.

  I suggest you disable automatically restart the system and check the exact error you encounter in the blue screen and let us know. Follow the steps mentioned below to disable the auto reboot.

  a. right click on my computer and then click Properties.

  b. click on the Advanced tab.

  c. under Startup and recovery, click settings to open the startup and recovery dialog box.

  d. clear the checkbox automatically, restart and then click OK, the number of times required.

  e. restart your computer so that the settings take effect.

  Method 1:

  Step 1:

  In safe mode, check if the problem persists. Follow the steps mentioned below.

  a. restart the system and then keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  If the problem persists then in safe mode, I suggest you to do a clean boot. Follow step 2.

  Step 2:

  Follow the steps mentioned in the article below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Method 2:

  I suggest update you the drivers on the system for the graphics card, etc. on the sound card system and check if the problem is resolved. I suggest update you also the drivers from the chipset on the system and check.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• Turning on my computer I get a blue screen saying 'Checking file system on C:.

  Original title: can not enter Windows

  Turning on my computer I get a blue screen saying "checking file system on C: the type of file system is NTFS.  The volume is dirty.  CHKDSK checks the files (step 1 of 3)»  It freezes ever complete the check, and I have to manually turn off the computer.  I can't get into Windows and also get this message in SafeMode.  Thank you.

  Hello

  We can refer to the following article and first try Method 3 and check if that helps.

  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  If you're able to boot in SafeMode woth command prompt, then you also, try Method 2 of the above article.

• get the blue screen for video ati3duag.dll and also 0x000008E (0xc0000005), 0xBF0C8855.

  ERROR MESSAGE
  I get the blue screen for video: ati3duag.dll, BFO72000, time stamp 33fb6e2af. How to find & fix the problem? Speak not disable bios memory.

  Also I get: 0x000008E (0xc0000005), 0xBF0C8855.
  This happens when I want to watch a video.
  

  
  
  I use windows XP Home Edition

  Thank you
  Laurie
  

  I guess you have a problem with
  your video driver. You may want to update or
  It may have been a version that your
  hardware has problems with.

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...