I have a HP Photosmart C5280 printer that has a jam of transport.

Similar Questions

• I have a HP Photosmart C5280 of Japan... Now I'm in the Philippines...

  I have a HP Photosmart C5280 of Japan... Now I'm in the philippines... cartridges here are incompatible with my printer... what should I do? your support page says that I have to reset my printer... How do I do that?

  I think you need to contact support to make this difficulty.

  Start at www.hp.com/support and click the contact HP link, once you have navigated to your local site.  Note that the instructions on this page I sent you to think you have cartridges for your new country available when you contact support.  You can find information of the cartridge for the country, you're now at www.suresupply.com.

• I have a HP Photosmart C8180 printer on the printer screen it displays C2FF8575.

  I have a HP Photosmart C8180 printer.  On the printer screen, it displays C2FF8575.  It won't turn off, unless I unplug islet that my Undo button keeps flashing. What does all this mean?

  The code of C2FF8575 refers to a fatal mistake in the firmware of the printer. The only thing you can do when this error is a hard reset. I will include the instructions below. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Rollers which collects the paper in my Photosmart C5280 printer make any movement.

  I have cleaned the rollers, checked the settings, changed the paper, dusted off the printer, but rolls that are supposed for the paper do not move, and the printer gives me a message 'Out of Paper' and do not print.  Any suggestions?  He is an all-in one Photosmart C5280, running on Windows XP, directly connected to the computer.

  If the entry of paper rolls do not move, then it is possible there is something stuck in it or the sensors that control are having a problem.

  * I start by remove all paper from the paper tray and check at the front and the back of the printer to make sure nothing is caught in the rollers

  * Hard Reset the printer by unplugging the unit while it is turned on, wait 30 seconds and plug it back to.

  Thus, there is a document provided by HP with the steps to resolve when a printer does not have paper in the unit.  The document can be accessed here.

  I hope this helps.

• I have Laser1005 and Photosmart 5550 printer but I couldn't use it on Win7 32 bit version

  Try to install the drivers that I download from the HP Web site, several times, but up to no positive sign, please help urgently.

  Last a few hours I am trying to install the Laserjet1005 driver, but it appears after clicking the Agreement page waiting for the user to plug in the unit, after that no progress, but the printer already connected by usb, the system indicates that you please solve my problem now if possible, thanks.

  Registration date: 2008-12-02 Message 2 of 2 (10 views) report inappropriate content Re: I Laser1005 and Photosmart 5550 printer but I couldn't use it on Win7 32 bit version

  [New] 12/03/2013 options 10:50 Hi RAJIB471, unplug the USB cable from the computer and wait for Setup to ask the you plug.

  Today 13/03/2013, I try as long as your Instruction, but result is the same as yesterday, once again I'm tempted this process also but no result.

  I use HP LAserJet P1000_P1500 series driver as suggested on the Web site. Up to now no + ve progress.

• I have a Dell (Dell V305) printer that is only a year. He has been guaranteed. What was happenning, is that the printer does not print up what I uninstall/reinstall.

  I'm having a problem with my printer does not print.  What I do I uninstall the printer and reinstall then it works very well for a week or two and then the problem starts again until I have reinstall the printer again.  The printer has ink, so it's not the problem. That's how I know it does not print: when I try to print a cartridge level page show empty and I can't print.  Yet once, when I uninstall/reinstall the printer, then the catridge levels show complete and then I can print.  I thought that maybe it could be that some issue that when I uninstall the printer that not all components are removed.  I uninstall not uninstall printer functionality and not the Add/Remove Control Panel.  Uninstall from the control panel would solve this problem?  Please notify.  Thank you, John

  Hi sockers,.

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  4. you receive an error message when printing?

  I suggest you run the fixit tool available in the link when you are unable to print on the computer and check if it helps below.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  If the previous step fails then I would suggest that you uninstall the software from the printer to the computer using the method mentioned in the link below and then install drivers from the Dell site.

  Uninstall Dell V305

  Drivers & downloads for printer V305/V305w AIO inkjet

• Why can not install my HP photosmart c5280 printer?

  My printer is a HP photosmart c5280. When I try to install it, a message come, thing about system requirements. Can anyone help please?

  See if it helps:

  Message "your system is unresponsive to the minimum requirements of the system" is displayed on the computer while installing the HP software
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01896918&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3204464

• HP Photosmart premium printer that disconnects constantly with my wireless setup.

  My Photosmart printer disconnects constantly.  I have to go to the Wireless Setup Wizard to bring him back.  I use a laptop HP pavilion dv6-321.  I also have 2 dell desktop computers that are connected is the same too.  I'm using Comcast as my ISP and have a Cisco's Linksys wireless router.  Can anyone help?
  Thank you.

  Hello

  1 did you change on your computer before this problem?

  2. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  "Method 1".

  Follow the steps in the article.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2

  Check to see if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  (For Windows 7)

  Previous post your answer for you help in this matter.

• HP photosmart C309g: we have an hp photosmart C309g printer printer all-in-one is it compatible with a laptop Lenovo B50-80

  want to know if the photosmart C309g is compatible with the laptop Lenovo B50-80

  For compatibility, you should check if the laptop has the required ports to connect to the printer and a compatible operating system.

  Lenovo B5080 has 1 x USB 2.0 and 2 x USB 3.0 ports and comes with the operating system Windows 10.

  The laptop Lenovo has required port. But Windows 10 operating system drivers are not available for this printer. The short answer is - NO

  However, you can follow the instructions on this link to try to get the printer to work with the operating system Window 10:

  http://support.HP.com/us-en/product/HP-Photosmart-premium-all-in-one-printer-series---C309/3984414/model/3793675/document/c04658195/

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• How to scan to PDF? I have the HP Photosmart c4680 printer and m7-1015dx Pavilion computer.

  How to scan in pdf format. I have printer hp photosmart C4680 & pc hp Pavilion m7-1015dx Entertainment, using the Windows 7 operating system.

  The computer only allows me to scan all the documents in for example jpeg photo format. My old computer has a program called HP solution center this permit scan me to PDF.  The new configuration of hp can only scan to the size of the photo. How can I fix it, so can scan documents to pdf format?

  Hi, you probably need "Full Feature software and Derivers" at the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=au&dlc=en&sw_lang=&product=3739150#N193 if still does not work. Please try to download and install for free a product called PDF24. You can open this program and import from a scanner, you can also use this program to edit the scanned or as pdf documents. Here is the link to download: http://en.pdf24.org/pdf-editor.jsp best regards.

• Photosmart C5280 print black vertical lines on documents.

  Any program you print from, lines appear. They also appear on the Windows Test Page. However, they do not appear when a test page is printed to the printer.

  I tried to install the printer on another computer, but the same thing happens. Head cleaning and alignment do not help. I scanned a wonky page to give a bit of an idea of what's going on. Then I tried different print settings, fast/project, general, of the word and the printer prints correctly again. Windows Page of Test prints correctly also. This is the second time this problem occurred. The Chuck and buy a new one?

  Operating system is Windows 7 Enterprise 32-bit.

  

  Hi there Raddy1977;

  Have you used this article?

  Go to the link provided and follow the instructions in the article is a guide to many of the troubleshooting steps that will correct the problem you are enduring is imperative that apply you it in the order presented, without leaving any.
  http://support.HP.com/us-en/document/c01005561

  Let me know the results;

  I hope this helps!
  RobertoR

• I have a HP Officejet K550dtn printer that won't print black

  They gave me this printer.  Everything seems to work OK except the black does not print!

  I checked the print HP 88XL cartridge and it seems to be fairly complete and I pierced the small seal on the cartridge to make sure it doesn't have ink and mass and the black liquid on the needle, the ink supply seems functional.  I don't know how this is supposed to weigh when complete... so that the info would be useful.

  I can't the printhead to move to the position of LHS, following the directions in the Self-Help, I found on the web.  I was able to do it once but it won't now work for some reason any.

  I tried the printhead cleaning online to see if it works and it spits out about 20 + pages with NO black on them.

  I tried 10 tap without help and tried 6 tap and this is where it goes through 20 + pages without stopping and no black.

  Want to try manual cleaning the print heads, but cannot get them to move to the LHS.

  I know that the tube containing the set of 3 colors and black cartridge print head are very thin and long (design?), but could not see anything that is crimped or any other problem with the tube.

  I noticed that when the printer is turned on color cartridge lights are "on" while the HP 88XL is not... What is that saying?

  I don't want to spend a lot on getting that BIG BOY working so any help is appreciated...

  Thank you

  Adrian

  Hello
  When the printhead moves to halfway to the left unplug power supply and remove the printhead and the printer, then turn on.

  Try this solution for bad printeheads http://www.youtube.com/watch?v=y6YjL7mff5c

  or replace

• I have a HP Photosmart C310a printer - purchased so I could print from iPad/iPhone

  Why does this work? between my iPhone and this printer.

  My impressions of Mac fine and it's wireless to the printer.  In fact, when my phone is not printing I went to the mac and it printed fine.  My iphone is not always the impression in fact, that he can't even see the printer.

• HP photosmart c5280: printing on CD and DVD

  I have not used the printer for a while and when I used it, it would not print on the DVD, but it did print on A4 paper.  I tried cleaning, printing facility head several times but to no avail.  I installed the latest drivers, software and the last program HP updated for this model.

  Dear HevnLgh

  Thanks for all your help in the past.  My printer is now printing labels for CD/DVD.

  Kind regards

  John White

• HP photosmart c5280 printer all in one

  I'm the horizontal through all my photos that I feel.  How can I solve this problem?  The color is very good in the photos, but I need to stop the horizontal lines through the print job how.

  Hello

  Glad to know that the first problem has been resolved.

  For the second question since his impression that you tried increasing the font on the computer, because the impression is dependent on the computer and the application used for printing.