I have a laptop hp pavilion 2313ax laptop 2002ax aka g6. BIOS does not appear dynamic switching option.
HP Pavilion 2313ax g6 laptop hp pavillion 2002ax us g6 aka.
Config.
1 processor Amd quad core a10 - 4600 m
2. 1 TB hard drive
3. 6 GB of ram
4 card 2 gb dedicated graphics + 512 MB integrated graphics. (7660 g + 7600 m)
5. windows 7 ultimate 64-bit.
The problem is that, when I dxdiag, then the video ram appears as 931 MB of ram. Even when I go to the bios there is no option regarding the dynamic switching of graphs in the system configuration.
Is it possible that there are no graphics card in my laptop?
or
The dedicated graphics card ram is 1 GB instead of 2 GB such as specified in the box.
I bought this laptop 3 days back.
Hello Ramit2313ax. I think I found the answer to your question.
I noticed similar problems in which the users had reported that dxdiag showed incorrect information concerning their GPU RAM. After some research, I was able to locate this document. Although the values returned are not those mentioned in the document remains very much the same. You can also find a lot of discussion on the issue on Google. Here is a link to my Google search results. Take a look at the threads listed there if you would like more information. In short, unless you noticed suddenly bad performance out of your graphics card, it is probably a non-issue.
If you find this useful or want to say thank you do not forget to click the White Star under my name to give me laurels; I really appreciate it.
If you have any questions do not hesitate to ask. I wish you a nice day!
Tags: Notebooks
Similar Questions
-
I bought photoshop CS5 in 2011 and my laptop crashed and I bought a new one and had to re install the program. How can I do that I have my original email with the confirmation number ETC, but it does not appear on my order history?
Download from products of CS5 download
Install and enter your serial number.
-
I don't know what else to try.
Here is an article on how to add a shortcut to the click right order send to: http://www.howtogeek.com/howto/windows-vista/customize-the-windows-vista-send-to-menu/. In your case, you must add a link to drive F, and then he would be there for your use (as long as you continue to call the peripheral drive F). You can also add one for a folder or two in drive F (or just about anywhere else) if that is your wish.
I hope this helps.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
-
I have to change some settings in my bios so that I can start my CD of restoration but whenever I click on the parameters of the UEFI firmware and select restart it never brings the Bios screen.
When the computer begins to boot, start to type the F10 key continuously. This should access the BIOS.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
Hi, I tried again and again to this backup that I have to do, its only accepts no not my USB key, but demand for the discs. I know that I can use the flash player, how, please?
Hello
-What do you mean by "backup on my windows 9?-Are you referring to "Windows Internet Explorer 9?-What are you trying to backup?-You are aware of any changes made on the computer before this problem?If you try to run the backup in Windows 7, please visit the links below to learn more about the backup in windows 7.Backup and restoreWhat is a system image?Back up your files
Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:
http://support.Microsoft.com/kb/555375Hope this information helps. -
I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?
original title: wap encriptaciónHello
Maybe this can help.
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914
-
itshow msg
Insert the disc pls
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html===============================================================
Check with Toshiba support, their drivers online (update or reinstall) and their forums.
Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
HY, I used to use your adobe photoshop cs6 I have my laptop. some of the reasons for my laptop was not working, so I've restored my laptop. I have tried to reinstalled photoshop with old license No, but his does not work. what I would do.
Please return to the message sent to you.
-
Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?
Hi Andy,.
I checked the reported compatibility list, and the game is listed as compatible. Work in 64-bit or 32-bit Windows 7? I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently. If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem. Let me know if you've done all that and you still have questions, and we can try something else.
Kevin
-
My wireless home does not appear on as a network available on my work laptop and always did before. He brings up and connect on my laptop. I have a Linksys broadband router - summer use it for at least two years with no problems until this. I know that my wireless works on my laptop because there is an unsecured network listed in the available window.
A really strange thing that happened two weeks ago (and I don't know if it's related) was my personal laptop was fine during several hours - then he kept abandonment of the internet connection. I couldn't keep him connected - reboot etc didn't work. I've not logged again until today - and that's what I use now. He connected very well today.
My work laptop had been connected to my wireless ealier in the week, but when I tried to connect as usual Thursday night he has not logged automatically as it has always done in the past. Nothing has changed. Security patches that my company had sent through this week have not downloaded until after that I tried to connect and couldn't. There is nothing new - he had no reason to think I should not have automatically connected as I have in the past.
Hi suemoo,-What version of service pack of Windows XP you are using?This problem occurs because the media connect action is not sent to the wireless service correctly.Method 1: Disable and then enable the wireless network adapter and check if it helps fix the problem.To do this, follow these steps:a. start the network connections tool in Control Panel. Click Start, click Control Panel, click on network connections and Internetand then click on network connections.b. right click on wireless network connectionand then click disable.
c. right click on wireless network connectionand then click enable.
Method 2: Try the methods listed in the following article and check, if it helps in fixing the issue:
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
Computer laptop XP does not appear in the network of Vista laptop
My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.
Can someone help me with this? Thank you so much in advance.
HelloMaybe this can help.To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.
http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have permission and security issues with Vista/Win7, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.
Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.
-----------
If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
Color problem
When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.Problem with the video card, cable or tv. I will try to update the video driver first.
-
My laptop Dell XPS 17 (L702x) does not recognize an SSD pro Samsung 840
Hello
I buy all my first SSD for my laptop Dell XPS 17 (L702x) (8T7CQS1). I managed to install the Samsung 840 pro (MZ-7PD256BW) at the HARD School of XPS drive, but the BIOS does not detect as a second HARD drive.
My BIOS version is the most recent: A19 (26/10/2012), I tried to load the BIOS default settings, but no change.
The SATA in the BIOS mode is AHCI.
What could I do with them?
Thanks, if you can help me,
Kris
Hi Kris,
Traction test drive 1 and put the SSD in this slot. Then boot in the BIOS to see if the drive is detected.
-
Hi all
I have a laptop beatsaudio that has been upgraded to win10: the HARD drive failed and I replaced it with an SSD.
The BIOS does not allow to boot from USB USB even when CD install to UEFI key.
Any help will be appreciated
Hello
I realized a work around:
Secure boot off
Legacy support on
and here's the big one
Boot HDD in legacy should be last on the list
The BIOS does not recognize that there is no. OS installed and continue to the next boot device as any other bios hp good done, it just stops putting so he can finally boot USB.
Thank you
-
HP Pavilion dv6-3259wm: CD / Blu - ray player does not open / working properly
My CD / Blu - ray player does not open. I can force it with a paper clip and put in a disk in this way, but it does not turn on and play the disc. The drive does not appear as a file selection as part of my hard disks in my computer section.
With that I guess my optical drive is broken, so I tried looking for a replacement. I looked up the name of the optical drive in the HP PartSurfer and he says it's called SPS - DRV DVD SATA BD Combo 12.7. Just to make sure, is this the right part I'm looking for? If so and say that I should go ahead and order this part, how do I go about removal of the optical drive in my labtop and its replacement by the new drive?
Hello
Yes... It is the right part for your laptop.
HP Pavilion dv6-3259wm Entertainment Notebook PC - (XZ087UA): 603678-001
You can follow the instructions from the links below:
Removing and replacing the CD/DVD drive
Or,
HP Pavilion dv6 Entertainment PC - Maintenance and Service of Guide
Maybe you are looking for
-
Other devices PCI Serial Port driver for Tecra R840-A208 necessary
After formatting, I'm unable to find PCI Serial Port driver. Is there someone who has the same driver problem?
-
HP PAVILION G6 2320: upgrade graphics for HP PAVILION G6 2320
Can I put my graphics for the PC with the configuration below? If so, what are the best options and extent of memory, I can go up to? HP PAVILION TX NB PC 2320 G6 i5 - 3230 M CPU @ 2.6 GHz (Planning to upgrade disk SSD and RAM 4 GB to 8 GB) http://h3
-
Looking for part # 0744 3 AT 579 HDD Upgrade
1. number and product name•Pavilion dv9720us 2 operating system installed (if applicable)Windows 7 64 bit 3. error message (if any)N/A 4. all changes made to your system until the problem occurredN/A 5. in the title of the topic, include a brief and
-
I buy don't pack widow vista home premium part No 10-52148 x Cd and part no printed in Malaysia is X 13-65749. I reboot and install window vista but can not active there. Please notify
-
A subscripcion of the year is over and I always get fresh!
So yes, I had the subscripcion of one of the 21/02/2014, I have over the software and im still get charges for adobe in my bank account!6 months of additional charges, I want my money back as simple as that.