I have a license an image to stick to adobe, but the watermark still appears. How can I make them disappear?

Similar Questions

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• I have a trial version of Illustrator and could not find the pencil tool.  How can I add it to the toolbar?

  I have a trial version of Illustrator and could not find the pencil tool.  How can I add it to the toolbar?

  It is in a group with the Shaper tool

• My menu bar disappears when I move the cursor to the top of the document.  F9 it back, but I have to hit it twice everytime I go up to the menu bar.  How can I disable this feature?

  My menu bar disappears when I move the cursor to the top of the document.  F9 it back, but I have to hit it twice everytime I go up to the menu bar.  How can I disable this feature?

  Read this:

  Bug: KIS version 15.0.0.463 patch B Acrobat Reader XI - Kaspersky Lab Forum

• When I do a bad screen images balloon race to fill the entire screen. How can I find them to normal?

  I don't know what to do so that the stroke of the image upwards. Do not fill the entire screen, they fill the screen to normal size. This has happened on two sites. How can I get them back to normal.

  Is it on Android or desktop? On Android, try double-clicking to zoom out. On the desktop, to reset the zoom, try Ctrl + 0 (it is a zero).

• After you disable the built-in webcam, imaging devices disappeared from the Device Manager. How can I make it reappear if I can activate my webcam?

  Hello

  After you disable the webcam integrated my laptop ASUS N80V, imaging devices disappeared from the Device Manager.  I use Windows Vista x 64.  How can I make it reappear if I can activate my webcam?
  Thank you
  Chris

  First try a system restore to a date that precedes you disabled the camera, it could allow the camera back.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Try reinstalling the camera driver. On my previous Asus link there is a click to download on that link. You must communicate your model number or click on 'Auto-Detection model '.

  There is also a forum on the Asus Support link, you can try to ask your questions here.

  You can also try the update of the BIOS available on the download link and then check if the unit is on.
  BIOS update guide for ASUS laptops
  http://Forum.NotebookReview.com/ASUS/174395-BIOS-update-Guide-ASUS-Notebooks.html

  Take note of the setting warn in red text.

• I have synced my 2 laptops, but there is no logo next to my favorites on the new list. How can I get them there?

  After using Sync to synchronize modules for my two laptops, preferences, BOOKMARKS, etc., I have little empty square next to all my favorites in the new PC, but none of the logos that appear beside bookmarks on my old PC. The old one (which I still sometimes use) running Windows 7 and the new; Windows 8.1., just in case this information should be listed here.

  How can I get the corresponding logos to appear next to the bookmarks on the new PC, instead of just empty squares?

  You see the FavIcon Reloader extension on the topic: page addons?

  • Firefox/tools > Modules > Extensions

  You can find "Reload-icons of Favorites" in the bookmarks menu.
  Reloader FavIcon: https://addons.mozilla.org/firefox/addon/faviconreloader/

• I have error code 28 for my cd rom, Miss me the .inf file CDROM how can I replace this file

  Acer Aspire 2929 and a HL-DT-SL DVDRAM GSA-T40N ATA DEVICE

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• "service pack do not have. recovery of Exchange"has been ongoing for more than 12 hours. Have turned off on the reboot, but the message remains. How can I fix?

  I installed the service pack and when the computer restarted message "service pack do not have. restoration of the changes. "came and slept there. I tried to turn off computer and start in safe mode, but nothing helped. Has been ongoing for more than 12 hours and no change. Any ideas? Thank you

  Hello

  You can try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• I have an old time favorite dark based on software screen saver... How can I make it work on vista?

  This old Screensaver works with windows 95/98/xp... but I think it might be a way to make it compatible with windows vista? do you have any suggestions?

  Hello Ariel,.

  For more information about installing a screen saver, see the help provided with the screen saver that you want to install. You can also check if it's compatible with Windows Vista.

  If this is not the case, try to install the screensaver in Windows XP compatibility mode and check if it works.

  You can read the following article to install in compatibility mode.

  Make older programs in this version of Windows

  For more information, you can also refer to the following article:

  Change screen saver

• my image of the screen is big how can I make it smaller

  My screen is the major newspaper on what it is because of this, how can I fix this need help I tried everything what

  Hello

  You can still use the ENTER key to OK, do not click OK with the mouse cursor.

  There are a few things you can try:

  Change the resolution of the screen;

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  If that fixed it, go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  Or do a system restore to before that happened.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• I have a Nikon D7200 and 12 elements does not read the RAW files. How can I to update or upgrade?

  Hi people. My 12 items does not read the update on the new RAW format Nilon D7200, a well known problem. In my view, that there is a new vintage Reader 9.0 for Photoshop Elements. Anyone know how I can get it? Thank you

  Very kind of you respond and I put your answer. PSE 13 accepts the ACR9.0 oyu know? TKS

• My 2 daughters have itouch, as well on my account even apple. How can I activate them text each other.

  My doughters each have an Itouch. They want the other text, but they are both the same account. How can I enable them to trxt each other.

  Every girl needs their own Apple ID to send and receive messages independently.  Apple intends that Apple ID (account) to an individual and not shared like you girl make.  Two people who share the same ID will cause all sorts of problems as you discover.

  However, family sharing allows people within the same family (up to 6 members or Apple ID) for share purchases such as applications, videos, and music. Separate IDs Apple will allow each girl to adapt their content to the individual, who will play an important role with the child earlier than later.  You can access most content another has purchased.    Implement the family share - Apple Support

  With current Apple ID shared as a member of a family separated, each girl and you can download their favorite of this shared ID content.  The idea is that each family member has their own tastes and can't do everything Captain ID contains.  Still with the family sharing, if family members want to share, everyone can access the other content.  Following this concept, when the child is ready to enter the world on their own and start their own family, they can take their music with them.  Let therefore the current shared Apple ID where over time.  Over time that it potentially becomes a monster, everyone has a hard time to get in their stuff.  Also there is no privacy in the shared ID of Apple.  It may be important for a growing family, which does not necessarily have a common knowledge of the interests of each other.

  For share purchases between members of the family:

  iTunes Store

  When logged into your own app and iTunes store Apple ID, app in iTunes Store on iDevice to iOS device you want to add content too, choose lower right of the screen > bought > family member to choose who bought item > select type of purchase > choose element > click cloud with down arrow to add feature, Member of the family of shopping.

  App Store

  When you are logged in your own App store and iTunes Apple ID, in App Store app on iDevice to iOS device you want to add an application, a member of the family bought (including the master Apple ID), choose updates from the lower right corner > bought high > choose member of the family who purchased the app, app to find in the list and click on Free or cloud with down arrow icon.

• I have a virus inches in my file and I lost all my files from the image. How can I get them back?

  I have a virus inches in my file and I lost all my files from the image. How can I get them back? Folder was on the desk. So please help me. All files were very important for me. Thank you.

  I have a virus inches in my file and I lost all my files from the image. How can I get them back? Folder was on the desk. So please help me. All files were very important for me. Thank you.

  =====================================
  Are you running Windows XP?

  Please post more details. The more information you share
  you chances of a solution.

  How do you know it was a virus?

  The virus has been removed?

  When the problem happened everything first?

  "Was" folder on the desktop? You say all
  folder is missing?

  The file might be in the trash?

  Is it possible that your files are still there but have
  become hidden?

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  If the photo thumbs reappear... they can turn washed
  outside. To clear this up... right click a thumbnail or a
  selected (highlighted) group or folder and the
  menu... Choose... Properties, uncheck the box.
  'Hidden' / apply / OK.

• I have synced my LR my android mobile. Why the images in a different order from the catalogue on the PC and how can I get them in the same order?

  I have synced my LR my android mobile. Why the images in a different order from the catalogue on the PC and how can I get them in the same order?

  You can check the order of Lightroom Mobile synchronization.

  Click on the collection name and choose the last option to sort.

  It should be similar to this screenshot:

  

  Once you get to know Lightroom Mobile images sort order, you can set the same sort order on your desktop of Lightroom.