I have a new Dell Inspiron with Windows Vista Home Premium. I BOUGHT IT NEW. After having a new hard drive installed when I lit a message came saying...

Similar Questions

• laptop (Dell Inspiron) with Windows 7 Home Premium is now slow to most of the activities - loading of the pages in the browser, etc.

  I heard that after a few years of use, Windows-based computers lose their ability to function. This happened to me before and I bought a new laptop. Now, I think that it happens again. The laptop (Dell Inspiron) with Windows 7 Home Premium is now slow to most of the activities - loading of the pages in the browser, etc... He is also declining my VPN connection occasionally, but also my direct connection is very slow. Latency shows speedtest software provided by the ISP in addition of 250 ms, download speed of 1 MB/s (compared with 8 planned) and 0.05Mbps download. The ISP has corrected this once, but I'm wondering now if it is the computer which is slow rather than on the network because my laptop works well on the same network/router. Is there one solution to this other than another new laptop?

  Jonathan,

  You say that your computer is slow, but all of the examples you give are rather than slow computer operations slow network communications.  To avoid any unnecessary work, check how fast the computer is on the tasks that don't use any network.

  If it works fine for tasks not network then you can concentrate on the problems of network as being the only concern.

  It has also become very slow for no network tasks you should study other causes.  Just as an example: If, like me, you sleep / turn off the computer when you are not using it then defrag will never work, so you can run it manually to make sure that doesn't cause problems.   Describe your symptoms in this thread so that someone can advise on the best course of action.

  In the unlikely case where you must run Dell Factory Image Restore, then the instructions are in your manual PC *.  Before doing this, run Dell Datasafe Local Backup then click on Backup, recovery to create - media allows you to create a bootable USB of the partition that you can use the normal procedure that failing Dell Factory Image Restore [to do this, even if you have already solved your problems so that you could face if the hard drive has failed never completely].

  * Procedure Dell Factory Image Restore [excerpt from the manual for Dell Inspiron 1545]

  1. turn on the computer.

  2 when the Dell logo appears, press several times to access the Advanced Boot Options window.

  Note: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.

  3. Select repair your computer.  The System Recovery Options window appears.

  4. Select a keyboard layout and click Next.

  5. to access the recovery options, log in as a local user. To access the command prompt, type administrator in the user name field, and then click OK.

  6. click on Dell Factory Image Restore. The Dell Factory Image Restore welcome screen appears.

  Note: Depending on your configuration, you may need to select Dell, then Dell Factory Image Restore factory tools.

  7. click on next. Data delete screen is displayed.

  Note: If you do not wish to continue Factory Image Restore, click Cancel.

  8. check the box to confirm that you want to continue reformatting the hard drive and restoring the system software to the factory condition, then click Next.  The restore process begins and may take five or more minutes. A message appears when the operating system and the applications installed in the factory have been restored to the State of the plant.

  9. click Finish to restart the system.

• Error code 37. I have a model CM5688E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has enough work. How to operate again give idea? The computer is less than 2 years.

  Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium.  My Optiarc DVD RW AD - 7203 has left a couple of weeks of work.  Anyone have an idea how I can get it working again?

  Hi Sunday47,

  There are many causes of Code 39 errors:

  ·         A required device driver is missing.

  ·         A required binary file is corrupted.

  ·         There is a problem with the file I/O process.

  ·         A driver that refers to an entry point in another binary file cannot load.

  I suggest you try the following steps:

  Step 1: Run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If the problem persists,

  
  Step 2: Uninstall and reinstall the drivers.

   

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System and then click on Device Manager.

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  5. When you are prompted to confirm that you want to remove the device, click OK.

  6. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Click here for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Dell Factory Image Restore - Dell Inspiron 1564 - Windows 7 Home Premium

  Hello

  My laptop (Dell Inspiron 1564 - Windows 7 Home Premium) slowed down a few days ago and I decided to restore the system to Dell Factory Image. The process started but stopped at most of halfway and gave the following message: "unable to apply the Image. I rebooted the system, but it would now not start, not even in safe mode! Perhaps, during the process of restoring a few essential Windows files have been erased.

  I want to restore the Image of Dell and can not reinstall Windows because I lost the product key of my Windows 7 original installation DVD provided by Dell at the time of the purchase of the laptop. Your help / advice is solicited and would be much appreciated.

  Thank you.

  P.S. The system recovery Partition is intact and has factory.wim and other related directories / files intact.

  If you use the Windows 7 Home Premium DVD Dell reinstallation it will automatically apply the Dell OEM SLP activation. In short, a product key is entered from the DVD and active if and only if the BIOS is validated by Dell to perform Windows 7. Therefore, you do not have the key 25-digit number on the certificate of authenticity. If you want to know the code then look under the battery.

  See here for more details:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-7/Windows-7-installation/

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM INSTALLED PR AND I HAVE NO CD

  Good evening

  I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM PRE INSTALLED AND I HAVE NO CD. I HAVE A THOMSON HOME WIRELESS INTERNET, TOO.

  I CREATED THE SETUP CD.

  IF I RESTORE MY LAPROP FOR FACTORY CONFIGURATIONS I LOSE MY CONNECTION TO THE WEB? IF SO, WHAT SHOULD I DO IN THE ROUTER?

  Thank you

  Saturday, may 3, 2014 15:41:51 + 0000, eduazevedo wrote:

  Good evening

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM PRE INSTALLED AND I HAVE NO CD. I HAVE A THOMSON HOME WIRELESS INTERNET, TOO.

  I CREATED THE SETUP CD.

  IF I RESTORE MY LAPROP FOR FACTORY CONFIGURATIONS I LOSE MY CONNECTION TO THE WEB? IF SO, WHAT SHOULD I DO IN THE ROUTER?

  No, you should not lose it.

• Can I install Office 365 in a PC with Windows Vista Home premium

  Can I install Office 365 in a PC with Windows Vista Home premium

  No, you do not have Windows 7 or newer.  Windows Vista lost all support and compatibility years.

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• my laptop hp dv5 with windows vista home premium series starts do not

  my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

  Hello

  Power outages often lead to problems of material with computers / laptops.

  If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

  If under warranty contact HP.

  If this isn't the case, under services, contact a repair shop, local.

  See you soon.

• I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Error code 80070005.

  I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?

  original title: error code 80070005

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  Windows Vista Home Basic to home premium compatibility

  the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  How is - happen you to Vista Home Premium.  No, they will reinstall Home Basic.

• You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium. Do you know where I can find documentation and how - in?

  You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium.  Do you know where I can find documentation and how - in?

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the below link:
  http://social.technet.Microsoft.com/forums/en/IECs/threads

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Logitech Setpoint incompatible with Windows Vista Home Premium?

  I have Windows Vista Home Premium. I did a reinstall on a HP Pavilion a1600n desktop. At the same time, I bought the logitech mk700 keyboard and mouse combo. Immediately, I started having problems with the new mouse and the old mouse wired logitech that I used previously. The main problem is that the mouse will not click on the home screen where I have a choice of 3 desktops. I have to use the tab and arrow keys on the keyboard to select my desktop and logon. In addition, the mouse intermittently will not click on IE8 or Firefox 3.6 or the Windows desktop. It will highlight, but not to select the different boxes and necessary navigation buttons. I tried various steps including trying to update the drivers to the set point 6.1 (could not because cannot uninstall the setpoint 4.8 software) uninstall and reinstall and update drivers by using Device Manager and nothing works. Any help/suggestions will be much appreciated.

  Thanks for the reply. The problem turns out to be with Logitech hardware. It was a faulty mouse. Logitech sent me a new mouse and by using the set-point 6.1 or the 4.8 it works very well.

  BTW, I just did a clean install and have no junk, etc on the computer, but I ran different cleaning utilities just to check. See the thread above routine that I just finished.