I have a Pavilion a6244n desktop computer. It does not, start just beeps long short 2 and 1. Beep codes HP

Similar Questions

• My computer (xp) does not start, just keep trying to start and recycle. Does not start in the chest or any other mode.

  Tried the recovery disc, and he said he couldn't fix it, but I don't know if I'm doing things.
  I tried the xp disc and run Setup, after that he installed something that he said that he could not find a hard drive of the computer

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  Restore the previous settings, repair facilities, and retrieve data.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I received a phone call from someone claiming to be windows and I have stupisly access to my computer, but does not give them the credit card details. This could be a problem

  I received a phone call from someone claiming to be windows and I have stupisly access to my computer, but does not give them the credit card details.  This could be a problem

  Hello Ann,.

  If you allowed them access to your PC, then it is a problem. I considered reinstalling my OS and change all my passwords. It would also make sense, if you use the online banking etc., to inform your bank that you have a security hole on your PC. This will alert them to anyone using your current password to the Bank etc.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Deactivation of PSE on computer that does not start

  Hello

  I have 10 PSE on my desktop and on a laptop computer that does not start at the top. I have a new laptop on which I want to install and activate the PSE, but cannot access the installation on the old laptop unregisters it. Can you do this remote please?

  Thank you very much

  Tim Leech

  You should contact the Adobe Support via chat and ask them to reset your activations.  They can't pin a specific machine well.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• My computer it does not turn off when I go early and turn it off?

  My computer it does not turn off when I go early and turn it off? u can help me, please!

  Hello

  ·         What operating system do you use?

  ·         Did you do last changes made on your computer before the show?

  If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  If you use Windows XP, see:

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

  See also:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• HP (JEALOUSY?) Desktop computer: PC does not load

  Someone please help, my computer does not start. It starts fine then before loading it asks me to reload my PC to an earlier time were it worked. It shows then the logo at the top and underneath the wheel loading, then the wheel stops, I don't know what to do, any help would be greatly appreciated

  UPDATE: the computer asked me to restore to an earlier date, I did, he said it needs to restart, now it starts all simply not at all it is stuck on the loading screen, please help

• Pavilion g6: on the laptop does not start...

  My computer hp laptop pavilion g6 have big problem of 2 weaks...
  First of all, they was directly cut working 25 to 30% battery level indicates without.
  Then in the last 5 days, they went to the startup problem
  And white screen... any time they start, but after 2 min keyboard or the cursor is a not working properly... some time say to prepare the satarting but does not start...
  I'll try all the formulas of yours but not working...
  Start the computer laptop led light still
  Led light also on but near the power light has no power continuous blink... That's the problem... Please help me as soon as possible...

  What is supported of these problems...

• NEED to recover files from the xp computer that does not start.

  I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?

  I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...

  -Boot your system and access the BIOS Setup
  -It will vary with different systems, but try to press "F2", "F10" or "delete".
  -If you need help with this step, let me know the model of the system, and I'll see what I can come up with
  -In the configuration of the BIOS, looking something like "Device Boot Configuration"
  -Go to the hard disk configuration and change the current option
  -Here are the most common options that I can think of:
  -SATA IDE, AHCI, (newer systems have more options, such as IRRT)
  -If the current option is "SATA", change it to "AHCI" or "IDE".
  -If the current option is 'DCIS', change it to "IDE", etc...

  It's just a quick run through a possible fix, without knowing the details of your system!  If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!

  -Riley

• Laptop computer G60 does not start

  I'm having some trouble starting by G60 Notebook.  The system runs Windows 7, but since it does not start I don't know if the system is a 32-bit or a 64-bit.  What seems to be the case, it's that he's trying to start and simply itself turns off.  For this, this little trick after having tried to boot Windows "normally".   I ran the diagnostic tests for memory and disk and both indicate that memory and disk are in agreement.

  I now get a cannot find the BOOTMGR.  I tried to recover the BOOTMGR using the recovery partiion, but what I will meet with the first issue of the computer itself put it off before it can perform the restore.  I do not have the disks for the OS, so if it's the secret I have to order a set.

  Your help is appreciated.

  Hi @LarryN

  Thank you for your request, I will do my best to help you.

  I understand when you try to start Windows normally, it turns off automatically.  You were able to test the hard drive and memory and all the two passed.

  Here is a link to an overheating and Auto Shutdown Troubleshooting questions that can help.

  Here's another if this isn't the issue. Troubleshooting of Error Messages on a Blue Screen may occur at the start or start

  You can also try booting in safe mode. Enter SafeMode (Windows 7)

  Select repair your computer.

  If the problem still persists repeat the process above, but select Safe mode with command prompt and follow the instructions to open the system recovery options.

  Again choose command line

  Enter the following information to the /rebuildbcd bootrec command prompt and press ENTER.

  Once this completed successfully try to start Windows normally.

  If you still have a question I suggest make a recovery in the factory

  Performing a recovery of system HP (Windows 7)

  While the recovery, there is an option to backup your personal files to avoid data loss.  If you do not already have one, now is a great time.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  At any time you can contact HP support for assistance.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Find product key Windows 8 on a computer that does not start

  I bought a laptop Lenovo, a little over a year and all of a sudden, he started a loop when I try to turn it on. The computer seems to want to start with the Lenovo logo and then I get a blue screen with an irritating "your PC has encountered a problem and needs to restart." We are only collecting the error information and then we'll restart for you. : ("message and then the computer restarts and does it again and again and and more.")

  I brought my friend who is a technician and he said that I need the product key Windows 8 to create the Recovery Disk/USB. So I checked the area in which my laptop has been delivered to and there is no product key is located. Is it possible to find even if my computer does not start? I can access the configuration screen, but I can't find anywhere here either.

  Any help with this would be really appreciated.

  Thank you

  LUN

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

  You must use the recovery partition to reinstall Windows 8, if its not functional, you should ask a Lenovo recovery media:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.

  If this does not work, contact technical support

  replacement of http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do and demand

  See also:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT076024

• ENVY of HP dv6 7357se: No. BIOS, computer laptop does not start

  Hello

  My laptop doesn't even start that too suddenly. After working for work that I put in standby and it does not start after that.

  I don't even see the "HP" logo

  I removed the battery for a while and reinsterted it. the bios came back for 2-3 seconds and it stop. I turned back on it and no. BIOS.

  I pressed the power button, only caps lock flashes and nothing else.

  Why this problem has come and what to do?

  HP document troubleshooting here may have something that will help you:

  http://support.HP.com/us-en/document/c01732674

• Pavilion 20 all in one pc: my HP Pavilion windows desktop 20 8 does not have the recovery disk

  I bought this recovery disk awhile back and it never worked to find the computer. You can here the disc is spinning inside but nothing apears on the screen. I did a hard drive test and everything came back by the way. I tried to enter my UEFI firmware settings to reset the BIOS, but I click on the option each time it gives me just a blue screen with the 0xc000000f erorr code so I can't even their.

  So it seems that the recovery partition is corrupt and the recovery disc you, where ever you got was defective or not bootable data.

  You will need to order HP recovery discs, if they are available.

  If you live in the USA/Canada, call this number...  1-800-334-5144.

  If you do not live in the USA/Canada, call the support number HP business PC for the country where you live.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/b usiness_desktops/6005us_332630_007.pdf

  Alternatively, you can download and create an ISO of 8.1 to Windows Installer.  But there is no HP software however.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• I have a windows vista desktop computer. My usb adapter see all fi networks wi and the lapttops work with it, but it says that it cannot connect when I try to connect. What is my settings on my pc?

  My computer settings re-put recently. It's not the adapter I bought a new and the wi - fi works very well. Help, please! I already did the thing where you go on manage wi fi represents and has deleted information and tried again, but they don't seem to work.

  Hello

  
  

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  
  

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

• I have no sound on my computer, it does not have any pregnant either.

  My computer no sound and does not recognize the speakers won't play CD

  I had the problem with the speakers being not recognised by Windows 7 and the solution that worked for me was to go to start: System: Device Manager: sound, video and game controllers: from there, right-click on your High Definition Audio (or whatever your audio) and select update.  Worked immediately for me and not too early to watch videos with my son before bedtime :)