ENVY of HP dv6 7357se: No. BIOS, computer laptop does not start

Similar Questions

• Bad Bios and laptop does not start

  One day, I tried to run an update of the bios and I now know that I made the biggest mistake by forcing my laptop off while running. It's a sudden reaction when my laptop had seemed frozen. I was reading on the update file/app/what is to have all closed while it performs this update but if tempting as I couldn't move my cursor and I had not yet started the update, just opened. After forcing to close, I cut on and get nothing more than a black screen, no light in the display. Y at - it any way to solve this problem at all? I went to someone about this issue, they said that I might need a new motherboard I want to buy because I just think that I mind as well buy a new laptop instead.

  Acer Aspire One ZA3 netbook
  Windows Vista

  That's all I know of memory and what is on the laptop

  Hello

  The BIOS is for the motherboard.

  And we cannot help you with BIOS problems.

  You will need to contact the manufacturer of your computer; Acer.

  If you put the wrong BIOS you can ruin your motherboard.

  See you soon.

• Upgrading RAM and now computer laptop does not start for Windows 7

  Hi all

  I'm working on laptop HP Pavillion G7-1070us of my father, and I'm having a problem starting after the installation of 8 GB of RAM.  I upurchased 2 sticks of 4 GB of DDR3 PC10600 UN buffered, NON ECC RAM of Frys and everytime I go to start the laptop it throws an error that can not load Windows and offers to run the repair or start normally... little matter that you select, it goes back in the loop of what prompts to repair or load... The BIOS recognizes all the 8 gb... have you tried 2 different sets of different manufacturers (Patriot and Crucial). As soon as I pop 2 2 GB sticks in it boots fine... I even tried to start the the Windows 7 DVD to repair windows, but he always comes back in the loop... I tried the two current and previous BIOS without success... Help, please

  Hello

  Sorry, I've updated the link:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+G7-1070us-upgrades.html

  Kind regards.

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Envy of HP dv7t quad laptop: laptop does not start

  My laptop does not start I get the message.

  Computer does not start. "A required device is not connected or is not accessible.

  Error code: 0xc0000185

  Using diagnostic tools, I get these results:

  Quick check memory: failed

  Hard drive short DST CONTROL: WARNING

  I am "spent" for the rest of the diagnostic checks.

  Thank you

  khosrowbp

  Your hard drive is failing, fast (these things last forever). You need to replace as soon as POSSIBLE. If you have important data on what cannot be replaced I suggest you plug it into another computer as an external drive and pulling all the data you need it off.

  If you do not have the possibility to connect the drive directly on another PC, you can download a live Linux CD/USB.

  Step 1: Acquire a blank CD or USB. If you use a USB port, format it in FAT32.

  Step 2: Insert your chosen in your PC Backup media.

  Step 3: Download Unetbootin.

  Step 4: Select a distribution in the drop-down list. Just about anything will work, but for your application, I would recommend "Puppy Linux".

  Step 5: Select your media.

  Step 6: Once Unetbootin is complete, insert your media in the PC is installed on the corrupted hard drive.

  Step 7: Boot puppy. (You may need to select your Flash DRIVE or a CD in your BIOS)

  Step 8: The use of the included file manager, mount the hard drive and browse for the files you need. You can then save these on another DRIVE or a CD drive, or the internet.

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• My HARD drive is detected by the BIOS, but it does not start

  I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
  Please, I need help!
  Thanks in advance

  Hello

  Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
  Board or wiring.

  Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
  forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ---------------------

  The manufacturer Diagnostic utilities - use them to check the disk.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Deactivation of PSE on computer that does not start

  Hello

  I have 10 PSE on my desktop and on a laptop computer that does not start at the top. I have a new laptop on which I want to install and activate the PSE, but cannot access the installation on the old laptop unregisters it. Can you do this remote please?

  Thank you very much

  Tim Leech

  You should contact the Adobe Support via chat and ask them to reset your activations.  They can't pin a specific machine well.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Satellite L300 - 20 d - after updating the BIOS, that it does not start now

  Hello

  I bought my wife a Toshiba L300 - 20 d (PSLB8E-0CK00YEN). It came with loaded Vista, which it cannot do.

  My grandson offered also to sort. He has installed a new hard drive, loaded with XP and managed to get almost all the drivers working except the WiFi.

  After spending many hours, he decided to update the bios of v1.8 to v1.9. Since it does not start... It happens with the Toshba screen, start windows normally, then it attempts to load windows, flashing and start the cycle al.

  He has tried default settings, tried a XP disk, setting on the disk, nothing. He just does the same thing in safe mode.

  Any suggestions will be appreciated

  Concerning

  Keith

  Hello

  The wireless network card is enabled with the hardware switch on the computer laptop and FN + F8? Check this box!

  Additionally, make sure that the latest driver on the Toshiba site is installed, and check the settings of the wireless network adapter TCP/IP.

  Moreover a description that is more accurate than the WiFi works not would be very appreciated.

  Good bye

• Need help setting bios to boot from the cd. I did already but the laptop does not start again for cd player.

  Hello

  I forgot that my administration windows log password after the holidays.  I have loaded down a free program called Ophcrack and had set my laptop to boot from cd 1 but I just cannot get the laptop to boot from a cd.  He just continued boot from the internal hard disk.

  The cd is an image and it is bootable on my desk.

  The model of laptop: laptop HP ENVY m6

  Product number: C2N77UA #ABL

  BIOS version: F.25

  Processor type: Intel Core i7-3632QM CPU @ 2.20 GHz

  OS: Windows 8.1

  I only did a password reset disk (I'm learning the hard way now!).

  I don't want to do a "System Recovery" because I have some data on it.

  I realize there are paid there password recovery tools windows, but I would like to use this 'free' program to try to break 1.

  I just need help / instructions to set the bios for laptop can be started from a cd.  I also tried to boot from a key USB but the laptop kept begin its internal drive.

  Help, please.  Thanks a ton!

  Ted

  Hi Ted,

  You are welcome

  Boot into the bios menu and go to the very section where you have disabled the Secure Boot.

  Find an entry called materials and this value to Activate.

  Save the changes and exit the bios.

  Follow the previous procedure below:

  Insert the bootable disc of Ophcrack and laptop stop.

  Tap away at the esc you key start Notepad to open the Start Menu.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Kind regards

  DP - K

• NEED to recover files from the xp computer that does not start.

  I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?

  I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...

  -Boot your system and access the BIOS Setup
  -It will vary with different systems, but try to press "F2", "F10" or "delete".
  -If you need help with this step, let me know the model of the system, and I'll see what I can come up with
  -In the configuration of the BIOS, looking something like "Device Boot Configuration"
  -Go to the hard disk configuration and change the current option
  -Here are the most common options that I can think of:
  -SATA IDE, AHCI, (newer systems have more options, such as IRRT)
  -If the current option is "SATA", change it to "AHCI" or "IDE".
  -If the current option is 'DCIS', change it to "IDE", etc...

  It's just a quick run through a possible fix, without knowing the details of your system!  If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!

  -Riley

• Find product key Windows 8 on a computer that does not start

  I bought a laptop Lenovo, a little over a year and all of a sudden, he started a loop when I try to turn it on. The computer seems to want to start with the Lenovo logo and then I get a blue screen with an irritating "your PC has encountered a problem and needs to restart." We are only collecting the error information and then we'll restart for you. : ("message and then the computer restarts and does it again and again and and more.")

  I brought my friend who is a technician and he said that I need the product key Windows 8 to create the Recovery Disk/USB. So I checked the area in which my laptop has been delivered to and there is no product key is located. Is it possible to find even if my computer does not start? I can access the configuration screen, but I can't find anywhere here either.

  Any help with this would be really appreciated.

  Thank you

  LUN

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

  You must use the recovery partition to reinstall Windows 8, if its not functional, you should ask a Lenovo recovery media:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.

  If this does not work, contact technical support

  replacement of http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do and demand

  See also:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT076024

• HP ENVY 15-uo11dx: did a reset and now it does not start

  I did a reset system where I chose to erase all mt files and apps. Now, he ends up with the spinning thing and does not start. I can get info from the bios with the F2 key and updated and then restored to the bios and nothing.

  Well I thought about it myself by pressing the F11 key several times and following the menu there. Thanks to this HP online

• Dv6 6155TX: laptop does not start. Black screen. LED, work of fan key, function

  Hi, my laptop is not starting, not even the BIOS or the manufacturer logo. I checked the RAM, tried to reset the CMOS battery, removed the HARD drive. At first, it worked for 2 - 3 times, but after 5-6 hours when I turned it on, it does not. I don't think that this is a display problem because windows key + B produces no beep. CPU fan works fine. Help, please.

  Hi, the problem was the corruption of the BIOS because of power failure. I have reset the BIOS of the USB.

  Thanks for you answers.

• Laptop computer G60 does not start

  I'm having some trouble starting by G60 Notebook.  The system runs Windows 7, but since it does not start I don't know if the system is a 32-bit or a 64-bit.  What seems to be the case, it's that he's trying to start and simply itself turns off.  For this, this little trick after having tried to boot Windows "normally".   I ran the diagnostic tests for memory and disk and both indicate that memory and disk are in agreement.

  I now get a cannot find the BOOTMGR.  I tried to recover the BOOTMGR using the recovery partiion, but what I will meet with the first issue of the computer itself put it off before it can perform the restore.  I do not have the disks for the OS, so if it's the secret I have to order a set.

  Your help is appreciated.

  Hi @LarryN

  Thank you for your request, I will do my best to help you.

  I understand when you try to start Windows normally, it turns off automatically.  You were able to test the hard drive and memory and all the two passed.

  Here is a link to an overheating and Auto Shutdown Troubleshooting questions that can help.

  Here's another if this isn't the issue. Troubleshooting of Error Messages on a Blue Screen may occur at the start or start

  You can also try booting in safe mode. Enter SafeMode (Windows 7)

  Select repair your computer.

  If the problem still persists repeat the process above, but select Safe mode with command prompt and follow the instructions to open the system recovery options.

  Again choose command line

  Enter the following information to the /rebuildbcd bootrec command prompt and press ENTER.

  Once this completed successfully try to start Windows normally.

  If you still have a question I suggest make a recovery in the factory

  Performing a recovery of system HP (Windows 7)

  While the recovery, there is an option to backup your personal files to avoid data loss.  If you do not already have one, now is a great time.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  At any time you can contact HP support for assistance.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!