I have a printer MFC - 240 c of brothers

Similar Questions

• WINDOWS 8 DRIVER FOR MFC - 240 C PRINTER

  I cannot locate the windows print driver 8 for my printer MFC - 240 c.  This printer is compatible with windows 8? I went to the brother download site, but there are no drivers. Thanks for your help.

  Compatibility Windows 8 Center offers a diversity of opinion about the full compatibility with the MFC - 240 c. There are two voices for compatible and one speaker against. Report complete here.

                    

  Support Brother MFC - 240 c page site (here) indicates that the drivers specific to Windows 8 for the MFC - 240 c are available on Windows 8 or Windows Update. There is also a white paper about Windows 8 driver support available here.

• I can't get my brother MFC 240 c to print documents from Windows or Internet.

  I have not fiddled something since I am not at all computer savy, but everything suddenly my brothers MFC 240 c printer prints not all documents while I am online or when I'm in a Word documents... Help

  Be as I am pretty ignorant in the computer solve this Department, please provide... Minies instructions step by step to fix the problem... If you can.

  I don't know what else you say, simply stopped the printer printing... and it does not indicate a need of ink... or any other impediment.  So, can you help me?  Thank you.

  Hello

  1. what exactly happens when you try to print? You receive an error message?

  2. you remember any changes made to the computer before the show?

  3. what operating system is installed on the computer?

  4. what web browser is installed on the computer?

  You can run the fixit from following link and check:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Also, check out the following links:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479

  Let us know if it helps or if you need further assistance on the issue.

• Unable to connect to a printer Brother MFC - 240 c to Windows 7 computer network

  The computer of my network which is connected directly to the internet and my router is a computer running Windows Vista (32 bit). My computer is connected through the network to access the internet and the printer connected to the computer base. My computer was also under Vista and networking has worked well.

  I installed Windows 7 (64-bit, not by choice, done automatically) on my computer and now I can't connect to the printer on the Vista machine. I can access the internet (even if it is significantly slower than when I had vista) and on basic computer file sharing, but I can not configure the printer. The printer is a Brother MFC - 240 c
  If anyone can help it would be greatly appreciated.

  Thank you

  I'm assuming you get an error indicating that the print driver for 64-bit is not installed in the Vista machine.  You can either install a 64-bit driver that has the same name as the x 86 driver on the Win7 machine printing and reattempt the connection, install the 64-bit driver that has the same name on the Vista computer (for other 64-bit machines), but it's more difficult.

  Alternatively, you can set the machine to check Windows Update for a printer driver that has the same name as the 32-bit print driver.  If gpedit.mcs run for the version of Windows you have.
  Computer configuration
  Administrive models
  Printers
  Extend the point and print for windows update research connection

  If there is no matching driver name, you cannot make a RPC connection, but you can create an SMB connection.  Search for Local Port.  There are many posts on this.
  Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

  I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

  Hello MichelleOZ,

  Items scanned by scanner are stored as Images (usually from the MPEG files) so I would look in the pictures folder. Otherwise if you remember what you call the files when you saved them you could also search for them via Windows Explorer.

  File photo:

  1. open Windows Explorer

  2. look in the folder list on the left side of the Windows Explorer window

  3. Locate the folder of photos

  Search:

  1. open Windows Explorer

  2. place your mouse cursor inside the Windows Explorer search box (upper right side of the Windows Explorer window), and then type the name of the file that you want to search

  3. Windows will now search for the file.

  4. once found, click on the file to open it.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I have a brother printer mfc which was yesterday scanning & now the printer does not connecct to pc... Help someone

  To have a printer brothers for a while... until yesterday would not connect to the pc for scanning.checkedd connections programming.

  HI Milton,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the printer connected to the computer.

  1. What is the model of the Brother printer?

  2. don't you get error message when the printer is not connecting to the computer?

  Run the printer Troubleshooter and check if that helps.

  Open the printer Troubleshooter

  Answer to us if you are having problems with connecting to a printer or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Installation of the Brother MFC-240 c failure

  OK, so I installed a printer/scanner/copier (Brother MFC-240 c) and my (Dell Studio 1749) system became slow insainly! so I restarted. then the Windows Aero effect disappeared and that basic services has begun. so, basically is started in Mode safe without the trunk. I couldn't do anything requiring a parameter system, or something of the sort. I tried to restore it and I got a message that the required services could not be started! that has been the standard message for everything. I got it somehow to start as it should, but now Kaspersky is sayign databases are corrupted and I can't understand it. Well. But what I would do if it were to happen again? I finally restored the 17/09/10 somehow. IM fine with the way it is now, but I want to what to do if that should ever happen again, and what I can do to prevent it. any help would be amazing! Thank you!!!

  Hello

  ·        You are able to use the printer on the system?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I you suggest to uninstall the printer from the system and perform a clean boot, and then install it and check.

  Step 1:

  Uninstall the system printer.

  Step 2:

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Step 3:

  Reinstall it on the system.

  See the article mentioned below.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 2:

  I suggest you to optimize Windows 7 for better performance.

  OptimizeWindows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi dear, I have a printer on winxp 32B and need insttal hp1300 all in a win764bit network.

  I am admin network. I have a printer hplaserjet1300 on pc with Windows XP (sp3) 32-bit. I buy an all in one pc with windows7 64-bit.

  connect my printer on pc (windowsxp (sp3) 32 bit) old and is sharing. So I need to add a single (windows7 64 bit).  I can not add it.

  Can you help me?

  Best regards

  The printer Hp laser jet 1300 5se insttaled in windows xp (sp3) 32-bit. And I need insttal now for Windows 7 64-bit. Please give sulotions in this way.

  Thank you.

  I await your response...

  Try the link below, it might help.

  Try changing the printer to be connected to the pc win 7 instead of the xp one if you are having problems.

  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

• I have a HP photosmart printer. I have problems printing of documents. I get a message that I have more paper. However, there are paper and the tray is installed properly. What can I do?

  I have a printer HP photosmart Plus B209. my pc is communicating with my printer but the printer will not print because it repeats me more paper. However, the tray is properly installed and loaded paper. I unplugged my printer and plugged back in nothing works. All boards

  Hello

  1. What is the full/exact error message?

  2. who is the operating system installed on the computer?

  A supply of paper problem can occur for several reasons, such as rolls of papers dusty or contaminated, the condition of the paper in the tray, or even problems with the software.

  You can run the troubleshooter and check.

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: You can change the operating system that is appropriate in the article.

  See also the steps from HP article:

  HP Photosmart Plus (B209a, B209c and B209b) all-in-one printers - all-in-one not picking up or feeding of the paper in the Photo tray

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3777155&prodTypeId=18972&ObjectID=c02156652

  Hope this information helps. Response with status so that we can help you.

• have problems printing wirelessly on my C510 estn. I get an error message that says: I'm paper when I did the paper

  off message on my c510 estn paper

  I have problems printing wireless to my C510 estn. I get an error message that says: I'm paper when I did the paper

  Hello

  1. what operating system is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem occurs.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4073314&prodTypeId=18972&ObjectID=c02248120

  Hope this information helps.

• I have a printer a Dell V305 who, in a part of the computer, said his thereand it says in "all programs" the dell printer folder is empty, WHY?

  Do you guys do anything better? WHY have I not talking to you twice about my problem?  I HAVE A DELL V305 PRINTER. IN THE CONTROL PANEL, IT SAYS THAT I HAVE A PRINTER. IN THE "ALL PROGRAMS", HE SAID THAT HE DIDN'T THERE HAS NO PRINTER. WHY?

  Hello James,.

  It seems that you see the contradictory information on the question of whether or not the printer is installed.

  A few questions:

  1. What operating system is installed?
  2. Have you tried to install the driver for this printer?

  We will make an attempt the following:

  1. remove the printer from the PC.
  2 uninstall the printer from the PC driver.
  3 reinstall the printer driver.
  4 reinstall the printer.
   
   
   
  Best regards
  Matthew_Ha

• HP Officejet Pro 8600 Premium: I have a printer HP 8600 pro works fine with my Windows 7 computer, but not with Windows 8.1

  I have a printer HP 8600 pro works great with my computer Windows 7 & computer laptop, but not with my laptop Windows 8.1. When I tried to print wireless (I didn't try connected), it would print only the first pages of 2 or 3 of everything I tried to print. I uninstalled the printer and inserted the CD to try to re - install and I got an error message indicating that the printer does not work with my operating system. I was able to install it earlier, but now, it will not install at all.

  Too bad. I'm sorry. I'm went to the HP Support Web site & downloaded a new driver & now it works!

• When I print a document, I would like to see the ToolTip that appears, as to what the printer, he went to and how many pages have been printed. How do I put on the taskbar?

  When I print a document, I would like to see the ToolTip that appears, as to what the printer, he went to and how many pages have been printed. How do I put on the taskbar?

  Hello

  Why are you trying to pin the window print on the taskbar?

  It is not possible to pin window print of the taskbar.

  The following article might be useful.
  Print notification messages do not appear when you print to a network printer
  http://support.Microsoft.com/kb/873147

• I have a printer HP 1600, scanner copier, installed on the computer, but I can't scan help!

  I have a printer, copier, scanner installed on computer, HP1600 however, for some reason any, that I can't scan, I tried to re - install, but computer tells me that I can't use the 'run' app.help please!

  Hey Kevin,

   
   
  1 have you made changes to your computer recently?
  2. What is the exact that when you try to re - install error message?
  3. what happens when you try to scan using your printer?
   
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Follow the link and check if that helps.
  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=1140734&prodTypeId=1
   
   
  Method 2: Follow the link and download and install HP scan Diagnostic Utility and check if it helps.
  Find and fix common printer problems using HP Diagnostic tools
   

• I have a printer all-in-one HP Photosmart 5520, running Windows 7 on an Acer netbook.

  I have had this printer for 8 or 9 months and have been printing with this 3 or 4 times a week. I changed the cartridges twice. My black cratridge began printing sporatically and I replaced it with a new cartridge. (it was almost empty)

  Now, nothing will be printed in black. I ran the cleaning cycle twice on the new cartridge without success. I returned to my dealer and purchase of all new cartridges (black, cyan, magenta and yellow) and installed all 4 carts and print a test page. All colours printed correctly... but not black!  I printed again the diagnosis Page print twice and printing clean cycle twice without success.

  Does anyone have and suggestions? The unit is still under warranty.

  Thanks for any help.

  Geoffb

  Hi Geoff, I would recommend that you contact HP support by phone immediately. It is possible that you need a replacement for the printer.

  Please let me know how you go

  Thanks, Ciara

  Phone numbers

  http://welcome.HP.com/country/us/en/wwcontact_us.html