I have an xp machine fault is 98% error: an error occurred during the reconfiguration

Similar Questions

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• Time Machine "an error occurred during the creation of the backup folder"

  Hi all

  In September 2015, I bought a 6 TB WD MyBook to use with Time Machine. Initially, I have me back an Early 2011 MacBook Pro 13 "and now it's an iMac late 2015 5 K. On both machines, the drive is connected directly to the USB port (without hubs was between the disc and the Mac). After about a week or two, I received a message "unable to full backup. An error occurred while creating the backup folder".» I clicked on OK, rebooted the MacBook and she continued to save. This message pops up every week or two weeks, and I ignored him. When I got to the iMac, the message still popped up after a few weeks, and he even got to the point where it would show every day when I woke up to the iMac to sleep after a day at the College. Several clears and even erase the disc course made no difference. I made contact with WD and they sent me a new drive (a 8TB vs the original 6 to). Now, the message popped up again today.

  When I was home from Uni, I was support my MacBook Pro 2015 retina on a FireWire drive, which I had used before purchasing the WD 6 to, using Apple's FireWire adapter Thunderbolt. It worked without any problem. In addition, back up my MacBook Pro via FireWire 2011 worked well for 4 years. Given that the MacBook Pro saved without fault when the drive is connected via FireWire, and problems have emerged only when I started to use a USB drive, I start to think that it is a problem of USB. I turned it off put hard drives to sleep when possibleand have active Power Nap and still get the error.

  Anyone else see this issue?

  Thank you very much in advance!

  See if Pondini can help you http://pondini.org/TM/C10.html

• An error occurred during the restoration of the virtual machine

  Hello world

  I pause my vmware and when I try to restore it I have this error

  «An error occurred in restoring the State of the virtual machine files "C:\Users\Asus\Documents\Virtual Machines\Windows Server 2008 R2 x64\Windows Server 2008 R2 x 64 - acc901af.vmss»»

  Thank you

  My suggestion would be to remove the State Suspended (.vmss) of the Virtual Machine file.  Note that the removal of the waking state has the same effect as when you perform a hard reset of the virtual machine, or by pushing the reset button on a physical computer, in that all data in unsaved open applications is lost!  However if the virtual machine resume so I don't see any other choice to try to run the Virtual Machine.

• Conversion of physical Windows 7 machine fails during the reconfiguration with converter.fault.FileCreationFault

  Hello

  first of all, thank you for providing tools such as vCenter Converter for free.

  I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.

  The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:

  Unexpected exception: converter.fault.FileCreationFault

  -ERROR - convert: converter.fault.FileCreationFault

  {(converter.fault.FileCreationFault)

  dynamicType = < unset >

  faultCause = (vmodl. NULL in MethodFault),

  file ="
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»

  MSG = ""

  }

  There is no other message log of the recent in the converter - server.log. The converter - worker.log says:

  from reconfiguring the system...

  using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig

  ReconfigurationTransaction: cached reviews system volume

  LocalPathToGuestSystemFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\

  LocalUndoFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$

  Cannot create undo file

  Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...

  TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: Task 3

  InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >

  Creation of vmx file Analyzer

  BaseParserImpl::Parse Config info is not cached

  F:\VM\wartberg\wartberg.vmx analysis

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  Registry hive
  . \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
  Boot\BCD is responsible under the name mntApi397493888030118019

  Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001

  MntApi397493888030118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi398445489630118019

  2 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019

  Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi404763500730118019 hive unloaded

  MntApi398445489630118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019

  MntApi406994304730118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi419224726130118019

  2 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019

  Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi425417937030118019 hive unloaded

  MntApi419224726130118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019

  MntApi427773541230118019 hive unloaded

  Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))

  VMOUNT library: 1450 error communication error with the pilot while

  Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.

  Error 16258 when you open the software hive

  Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))

  MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1

  OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path

  BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx

  WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.

  bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.

  http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".

  http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.

  WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: task-1

  bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.

  As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).

  Any help is appreciated!

  Thank you

  nepper

  OK - I'll upload versions changed in maybe 15 minutes

  muss weg kurz

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Converter does not reach 1% - "an error occurred during conversion:"converter.fault.ConverterFileFault"

  I'm trying to convert a laptop of ageing of a virtual machine, but it does not reach 1% with the vague error "an error occurred during conversion:"converter.fault.ConverterFileFault. "

  With VMware vCenter Converter Standalone Client 5.5.1 build 1682692 locally running the conversion of the machine running.

  On a laptop with WinXP Sp3, with a single drive, by recording the VM on a USB hard drive attached.

  I have run chkdsk on the drive. (with the F option) and defragmented several times

  Shadow copy services have been restarted and are running.  I even downloaded the VSS SDK and replaced the *.dll.
  It is with the latest version of the client converter

  No firewall is active.

  I am logged on as administrator, even tried to create a role of administrator with the name "Administrator".

  Drive is not encrypted I can say (no Truecrypt)

  The xp includes backup works (i.e. work VSS)

  I looked at the other questions/logs here, but do not see the same exact

  VMWare Converter error: impossible to clone the volume C

  Converter fails at 1%

  UPDATE: Solution via Hack
  I could get this job sort of a hard-working hack.

  I first downloaded Acronis image 2014 (a free 30 day trial) then who used to capture the image of the operating system, the * tib file is about 40 GB in size.

  Unfortunately VMWare converter works only with version of Acronis 2012, so the *.tib file could not be used directly to the source of the virtual machine

  So I created inside VMWare Workstation a new empty VM for Windows XP

  I gave her 2 virtual disks hard 50 GB and 50 GB mapped as C: and H:

  reinstalled windows in the C

  copied the *.tib in the secondary hard drive H: as shared folders (for example how a USB is sometimes mounted) are not accessible when the Acronis is restoration of the tib via its custom BootLoader

  Download and install Acronis image 2014 on this new fresh OS

  used Acronis to restore from this backup on H: * tib in the C: crush installing the OS

  reactivated again, windows

  fighting pilots who the real differeed

  Defragment the drive VMware

  Seems to work as expected.

  I got this job, see the update on the use of Acronis to work around the problem.

• Keychain error 100001 during the set up Time Machine to new iMac

  I received this error message: "error 100001 Keychain occurred during the creation of system Keychain for the username entry + all trying to set up Time Machine using my Airport Time Capsule for backups to a new iMac. Time Capsule airport working flawless since a few years back up both my laptop and my husbands laptop.  Scanning in the nets, I see that this is not an unknown problem, but I couldn't find any viable solution. I tried to edit the main chain. Suggestions?

  On a brand new iMac, it's kind of serious error. I could contact the Apple support and see if they know of the issue.

  I've never seen someone post in this topic... but as you say, this is certainly not unknown.

  Keychain error 100001 when you try to reconnect time machine.

  The iMac came with El Capitan or you upgrade settled according to Yosemite?

  Since the above post, I'd be inclined to reinstall the operating system.

  OR

  I must say that Time Machine becomes annoying... It is complicated and there are several issues where people often find that it doesn't work when they most need, IE recovery.

  I'd be inclined to install and use Carbon Copy clone or Chronosync. You can always make the backup of the TC, although to be honest, once again a 2.5 "self-powered drive plugged into the port USB3 can work much better with an iMac... occasional use of backup on the TC to ensure that you have a second backup.

• First construction of DEFAULT DOMAIN for "Integrated Weblogic Server" in jDeveloper 12 c gave ERROR: wlst &gt; error occurred during initialization of the virtual machine;

  Hi my community developers estimated!

  I just installed Oracle jDeveloper 12 c as part of the new version BPM Suite 12 c successfully on my LAPTOP.

  However, when I try to create the first integrated default for the weblogic Server domain to run by using the database of embedded JAVA (do NOT use an external Oracle DB) - I get the following error in the log below:

  QUESTION - how/where can I change the ' USER_MEM_ARGS = - Xms32m -Xmx1024m' specification in jDeveloper, to allow a smaller 'MAX MEMORY setting, instead of Xmx1024m"since I DO NOT have enough memory (virtual) on my laptop to create the default domain.

  Thank you very much!

  Please see from the log of the errors below:

  Add the environment variable to WLST script = - Xms32m USER_MEM_ARGS - Xmx1024m - XX: MaxPermSize = 384 m
  Log file: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain.log
  Label: JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S
  Home product: C:\Oracle\Middleware\Oracle_Home\jdeveloper\jdev\
  Area: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain

  2014 BuildDefaultDomain2.py - 07-04 18:00:03

  cmd.exe /c "" C:\Oracle\Middleware\Oracle_Home\oracle_common\common\bin\wlst.cmd""D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain2.py""
  Process began
  WLST > error occurred during initialization of VM
  WLST > could not reserve enough space for lots of things
  WLST > error: could not create the Virtual Machine Java.
  WLST > error: a fatal error has occurred. Program ends.
  Elapsed time: 437 ms

  Thanks James, I changed the memory allocation in the WLST script and I no longer get the VM error

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• Error: "some errors have occurred during the processing of requested tasks". Sending emails from Outlook Express

  Original title: Repetitivet sending emails from Outlook Express

  When sending emails from my Outlook Express , the following occurs:

  (1) as usual, send the message falls into my Outbox and begins to be sent.

  (2) when the message was sent, I get a message that "some errors occurred while processing requested tasks" but no actual errors are displayed.

  (3) the sent items folder does not show that a message has been sent... but a message has been sent.

  (4) the original message remains in my Outbox and will be sent over and over again.

  As you can imagine, it's a very embarrassing problem.  All suggestions are welcome, but please keep the instructions clear and simple.

  Ed *.

  Hello

  Windows XP Service Pack 2 is installed on your computer? To work on this question, see these steps.

  It seems that there is a corruption of dbx file.

  I suggest you go over your messages out of the Inbox, and then create new folders Outbox and sent items after you move the messages you want to save to a local folder that you create.

  Reference:

  (a) click onTools

  (b) thenOptions

  (c) selectMaintenance

  (d) Record Store will reveal the location of your Outlook Express files.

  (e) Note the location and navigate on it in Explorer Windows or, copy and paste to start and select run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden.

  To view these files in Windows Explorer, you must enable Show hidden files and folders

  Reference:

  (a) clickStart

  (b) Control Panel

  (c) Folder Options icon

  (d) notice, or in Windows Explorer

  (e) Tools

  (f) the Folder Options

  ( viewof g).

  With Outlook Express closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open Outlook Express.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Reference:

  (a) clickOutlook Express at the top of the the folder tree so no folders are open.

  (b) click onthe file

  (c) work offline (or double click working online in the status bar).

  (d) file

  (e) file

  (f) compact all folders. Wait for the compaction to complete.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend about a300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Compact often as specified above.

  Reference:

  (a) in the Tools

  (b) selectOptions

  (c) maintenance:

  (d) uncheck Compact messages in the background and leave it unchecked. (N/a if running XP/SP2).

  And backup often.

  See also: error messages when you send and receive in Outlook and Outlook Express http://support.microsoft.com/kb/813514

  An Outlook Express basic repair kit

  http://support.Microsoft.com/kb/2398839

  Hope the information is useful.

• Is it possible under the EULA to have several virtual machines on a single physical hard disk while using the same OS license or do I need a separate license for each virtual computer?

  I have several programs that are not compatible with my 64 bit Windows 7 operating system.  I would like to run each different software under another virtual machine of VMWare (5 packs of different software programs and 5 different virtual machines of Windows XP).  These would all be installed on your laptop.  I can use the same license of Windows XP for each virtual machine, or do I need a separate XP license for each (different XP in case 5 licenses)?

  It is lifted directly from my EULA:

  1. GRANT OF LICENSE.

  The manufacturer that you grant the following rights, provided that

  comply you with all terms and conditions of this EULA:

  1.1 installation and use.  You may install, use, access,

  display and run one copy of the SOFTWARE on

  THE COMPUTER.  The SOFTWARE may not be used

  by more than two 2-processor both on the

  COMPUTER, unless a greater number is

  indicated on the certificate of authenticity.
  Then...
  This means that as long as you are running two or more instances of XP at the same TIME, you agree? Or does this mean that, after you install once, you have reached your limit?
  I imagine that most people (including those who are running Microsoft!) will say that the second interpretation is correct.
  However...
  If this is the case, anyone their hard drive as a backup to clone strategy would violate the EULA!

• A problem occurred during the digital extraction of the Machine Identification of rights management. XP and service pack 3

  When I try to down load MP3 audio books from the library I get error message "rights digitial management machine identification error.» I tried to download the upgrade of the security to windows media player component that had fixed this problem before, but the update button was grayed out.  I've applied all updates of XP and windows media player I can find and no solution.

  Try to reset the DRM system, by following the instructions at http://support.microsoft.com/kb/891664 . Tim Baets
  http://www.BM-productions.TK

• Windows Mail - "a few errors have occurred during the processing of requested tasks"

  I get a window every time I have bring to the top of the box mailbox Windows that indicates that 'the host 'YAHOO' could not be found. Check that you have entered the server name correctly - the Yahoo Acct. "Protocol: Pop3, Port: 110, secure (SSL): no, SocketError:1101, error number: Ok899CCCOD.

  There are displayed (hide) (cancel) (Review) boxes which do not appear to cause the return of this particular window to solve.   When I click on 'Review' there is another window appears which States "1 of 2 tasks are completed properly" when I click on "Hide" the window closes but will repeat whenever I visit the Windows Messaging page.  I've not been able to find an answer to this situation, although I did a lot of research to help and support without result.

  You will appreciate any useful info that can clear up this episode.

  Hello RenoMac1,

  Solution: -.
  In all likelihood, your mail server does not work. The ISP (or internal it Department) brought the server for maintenance. Perhaps the server was interrupted due to other problems, or there is a problem with the connection.

  There is really nothing you can do but wait, and keep trying. If the problem persists for a long time, you can call your ISP (or internal it Department) and find out if there is a problem. You can usually find out if it's a connection problem trying to access the World Wide Web using your browser. If you can access the Web, you can assume the connection is good, and the problem lies in the server. Some access providers offer network status reports on their Web sites. You can see the status page of the network on the Web site to see if the ISP knows the problem and is working to fix it. If this is not the case, call your provider and find out if this is a known issue. In most cases, the problem is on the side Server and not with your PC, and you have to wait for its resolution.

  --

• Windows Live Mail a few errors have occurred during the processing of the task. Please see the list of errors below for more details.

  How is it, I always get this message every time I check my e-mail. On the one hand there are no errors below. Is there a way that this error can be fixed? If so, how?

  Windows Live Mail has its own support forums at the Windows Live Solution Center . Ask any question you may have in any of the forums on the right side of the this page. You will probably be asked to give your version of WLMail and Windows so that the answer may be more accurate. In WLMail to find your version of the software, a press on ALT - H. If it doesn't show you the version and the build number, press on escape to two times, and then Alt - F B.
  It would be useful to know a little more about the problem. Do all tasks in case of failure, or perhaps only the first on the list? Each time I check my e-mail address means whenever you click send/receive (or Sync, according to version)? Or maybe only every time a scheduled send/receive takes place?
  There is a bug in WLMail 2011 described by Peter.R shortly after he was released a year ago: a shipment / automatic reception fails on behalf of the city in the first place the mail in the task list if the include this account when checking for new messages is selected for a news account. To work around it, right-click on the name of the news account in the folders pane, select Properties and uncheck the option on the general tab, delete the account can make things worse.

  Noel

  updated information hit. Windows Live Mail forums are just around the corner under Windows Essentials

   

• SE error message during the update downloads after you have installed the CS5 Suite on new Windows 10 PC

  I just bought a new PC running Windows 10.

  I downloaded my CS5 programs using my license out of the web of Adobe. So far so good. The download went well and programs seem to work fine, however, when I go to register the product, he won't let me.

  Also, when I download updates ARE available, they have error messages saying download errors, try again later.

  Try to download the updates manually:

  Updates