Qosmio F750-10N - question on 2D and 3D display modes

Similar Questions

• Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

  Hello

  Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

  If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

  Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

  Please could someone help or maybe post a link to a download mirror.

  Thank you very much.

  Hello

  First of all, it seems that the 8.1 win is not supported for Qosmio F750.
  So I might be difficult to operate BT

  However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

  This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
  Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
  The pilot of this system must be installed before the filter of BT driver.

  But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

  But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

  Good luck

• Qosmio F750-Q10 - how to use Intel Wireless Display

  Hi all

  My apologies if this has been posted somewhere but I can't find it if it has.

  I have a Qosmio F750-Q10 laptop and have recently bought a Toshiba LED Smart TV, which includes the Intel Wireless Display.

  I wonder if my laptop is able to use this piece of software that I tried to download the software from the Intel Web site and tried to install one.

  However, when I try to install, I get the error message;
  "Abandoned InstallShield.

  This platform is not compatible with Intel Wireless Display"

  Can someone shed light on this for me please?

  Thank you
  Steve

  Intel is the leading company behind this feature and they have a very nice document describing the necessary components and software to be able to implement the WiDi.

  You can find it here:
  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031059.htm.

  To check if your laptop s equipment meets the requirements of the Intel Wireless Display

• Qosmio F750: Activator screen 3D works and give me an error message

  Hello...

  I have a problem in the activator of the 3D screen...
  When the laptop starts the activator of 3D screen not working and give me a message
  'already Look for the icon next to the clock running'

  I looked there but I have not found the icon of the program...

  I uninstalled the program and reinstalled but it's the same message

  Is it possible to re-run the program?

  Thank you

  What laptop Qosmio model do you have?
  Do you use it with the original pre-installed OS that you got with it?

• Setting port channel between UCS - FI and MDS 9124 (Mode F)

  Dear team,

  We tried to create the channel of port between UCS FI and MDS 9124

  But the port channel do not take action in mode F on MDS 9124

  FI is in host FC end Mode

  We have allowed FC uplink on FI trunking

  We have activated NPIV on MDS

  We have activated the MDS trunk

  FI and MDS in default VSAN

  To check that we have changed the way FI FC channels mode and switch port became active, but in E mode

  When we enabled CF trunking of uplink on the port mode FI channels and FC Switching became active in mode TE

  but in both cases above, showflogi database shows WWPN of SAN alone does not have the any fi.

  How to achieve this?

  Have read that no need to change the mode switching mode of CF swicthing and keep FC Endhost way

  SO how to channel ports with mode F MDS and FI (Display Mode as NProxy)

  What is it has nothing to do with the MDS NX - OS version? (https://supportforums.cisco.com/thread/2179129)

  If yes how to put as license for ports came with the camera and we don't have any CAP/PAK or license file as she came

  with license

  Also, we saw 2 files available for download (m9100-s2ek9-kickstart - mz.5.2.8 .bin and m9100-s2ek9 - mz.5.2.8 .bin b b) to use

  Thanks and greetings

  Jose

  Hi Jo Bo.

  What version of the software if your MDS race?

  On your UCS do connect nxos and show ficelleStringString ficelleT inteface and find the mac address.

  It is possible that you could be hitting the bug below. If this is the case, you may need to update the firmware on your MDS.

  Add MAC YES '002a6a', '8c604f', '00defb' for 5 k/UCS-FI

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty04686

  Symptom:

  Link change cannot connect any other Nexus or other Cisco Switch in mode VAN with a port channel F.   Question can be viewed in older versions of 5.1

  5.1.3.N1.1a

  but not later

  5.1.3.N2.1c

  Release. Question is also found in

  5.2 (1) N1 (1)

  and

  6.0 (2) N1 (1)

  and later versions.

  Conditions:

  Nexus configured for the link SAN PortChannels or NPIV Nexus mode connected to the UCS via regular F port channel where UCS VAN VAN edge mode switch: YES switch manufactured FI or another Cisco UCS Port WWN: xx:xx:00:2 has: 6a: xx:xx:xx or xx:xx:8 c: 60:4f:xx:xx:xx

  Workaround solution:

  Turn-off on Nexus 5 k TF-port question link mode does not happen with standard F-PORT SAN to remove Portchannel config

  Other Description of the problem:

  To check question collect please see the flogi-event history internal errors whenever the port is attempted OLS, AMENDMENTS, PBA counters will increment. This can be determined via the following output, view port internal info to see all the internal-historic port of error events

• Qosmio F750 - CUDA driver problem and display

  Hello

  I do computer scientist parallel with my Qosmio F750, but I am unable to run CUDA database test, called "bandwidthTest.exe". It returns the following error:

  cudaGetDeviceProperties return 35
  -> CUDA driver version is not enough for the version of the runtime CUDA
  ...

  I did some research on this problem, and everyone agreed that the driver of my screen should be updated. I already 290 driver version, but the latest version is 301,24. Why can't just install the NVidia site Web of NVidia drivers as I do with all my other computers?

  What can I do to fix this? I don't want the certified driver for Toshiba... I want just a standard NVidia driver.

  Thank you for all the efforts made.

  > Why can't just install the NVidia site Web of NVidia drivers as I do with all my other computers?
  With computers, you mean laptops or desktops? I put t know where to work but I guess in your company or school where you work is THIS Department. Contact the people who work there and I hope they can help you with the explanation why you can't use the NVIDIA drivers.

  There is big difference between desktops and laptops. Desktop graphics cards are supported by the manufacturers of graphics directly, but on mobile units are mobile manufacturers.
  There are several reasons for this.

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Differences between P750/05F Satellite and Qosmio F750/02Y?

  Hello
  I was comparing the characteristics between the P750/05F Satellite and Qosmio F750/02Y but I couldn't really grasp the difference.

  My guess would be only from the outside, perhaps the screen?
  On the card in the Toshiba website says as the Satellite battery last up to 5.5 h rather than 3.5 h on the Qosmio for some reason any!

  On the 3D, I'm not sure as it is said by Satellite can also be used with glasses but Qosmio on an external 3D TV...

  Can anyone help me pls. I really want to get one of them soon.
  The Satellite is cheaper $ 100.

  Thanks :)

  I like the Qosmio series and I would take the Qosmio F750.
  It of great multimedia laptop and if you want to watch 3D content without the use of 3D glasses then the F750 should be your preferred device.

• Qosmio F750 and always 3D images

  When Qosmio F750 will be supported the rest of 3D images?

  You have already created another thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68960
  Recommend you to follow the discussion on thread to avoid some misunderstandings

• Question about 3D games on Qosmio F750 - 1013 X

  Hello

  Now that I look at 3D movies work very well for me... I think try 3D games.

  First of all... in order for me to play games in 3D, what I buy labeled games like 3D games or component of Nividia in the laptop can kind of convert all 3D games?

  Can someone guide me through the steps to play a 3D game?
  Examples of games that I can play 3D?

  See you soon!

  Hello

  Please take a look here.
  + Support of glasses free 3D mode for games on the Qosmio F750 +.
  http://APS2.toshiba-tro.de/KB0/TSB1C038G0000R01.htm

• Qosmio F750 - touch buttons does not work after Windows update 10

  I use a laptop Qosmio F750 (PQF75A-02Y00Q).

  Installed on the computer the previous operating system was Windows 7 Home Premium 64-bit. Then, I upgraded the operating system to Windows 64-bit edition 10.

  As expected, this change would cause problems to appear. The thing that is really bothers me right now is that the touch of the keys in the top right of the keyboard do not work as expected.

  The buttons respond always if you touch them, but they do nothing on the screen. for the most part. When I touch the Volume Up / Volume keys down, they work as expected. However, the key Mute, the button Play/Pause, the Wifi key on / off and Mode (as well as the key to toshiba bulletin board) eco button do nothing.

  Curiously, when I manually turn eco mode from the power settings mode eco button again turns the green.

  My last question is, how can I fix this so that ALL keys work as expected?
  
  -----------------------------------------------------------------------------------------------------------------

  I noticed that the recognition facial webcam was funny things as well, but everything what needed to be done was to recalibrate the installation for that to make it work again.
  Curiously, all the FN key functions work well.

  In addition to the question in bold, there are all the other drivers should I install to improve/restore functionality to my laptop? As the page of Windows 8?

  Hello

  I have the same problem since update 8.1 and now after 10 update, even more I lost the 3d display function since I updated to 8.1.
  MY QOSMIO is PQF75E-F750

• Qosmio F750 - how to change the graphics memory dedicated to 2 GB...

  In order to get my Qosmio F750 ready to run some games, I've updated all the drivers on via the toshiba Web site and the NVIDIA site also the software downloading. This includes upgrading the BIOS to version 2.00.

  According to the [laptop specifications given on the Toshiba site | http://www.mytoshiba.com.au/products/computers/qosmio/f750/pqf75a-02y00q/specifications].

  I should have the following allocation of memory for the graphics:
  "4095 MB Total: 2048 MB of memory dedicated + 2047 MB shared memory.

  When I check the window Information on the performance and tools, I'm getting shows the following information:

  Graphics
  --------------------------------------------------------------------------------

  Display type card Intel(r) HD Graphics 3000
  Total available graphics memory: 1 696 MB
  Dedicated graphics memory: 64 MB
  Dedicated system memory: 0 MB
  Shared system memory: 1632 MB
  Display adapter driver version: 9.18.13.1422
  The primary monitor resolution: 1366 x 768
  DirectX version: DirectX 10

  Of course, when I look at the specifications of the laptop, I realize that the current graphic memory allocation matches the economy power Mode i.e. allocation of graphics when running on battery

  Normally, it would be nice, however, I don't see any change in the displayed info even when I'm running on current alternative.
  I checked all my power settings, but even when everything is set to "performance mode", the information displayed is the same.
  I try to look in the system bios to change manually the graphical distribution but none this option doesn't exist. Rather all options are defined in performance mode...

  So my final question is, * how can I change memory allocation performance mode graph as it is stated in the specifications of the system? *
  Is this something that happens automatically without changing the displayed Info?
  Is there a driver that I forgot to update? An update of the driver caused cela?
  A BIOS update caused this?

  On a side note, the audit of the DirectX Diagnostic tool, I have the version of directx is displayed as version 11. So I thought that the problem was with the displayed information. But even on the Diagnostic tool gives me the same information.

  I would be very grateful if someone could help me with this.

  Thank you
  Jean-Pierre

  Hello

  This is controlled automatically by the graphics driver.
  If the application that is running would require more RAM (IE game), the graphics card would control this value and I would add some of the memory to the memory of the graphics card.

• Programming to stereoscopic 3D on Qosmio F750 11U (free 3D glasses)

  Hi people,
  I love the new material, have had a good day, install all the drivers and the wonderful
  tool of
  [http://coxcoppes.nl/3DScreenActivator]
  but have not yet discovered how to see demos of 3D software.
  Blu - Ray run usually in 3D after I fiddled with the controls of the Toshiba Blu - Ray player.

  My question: How can I program it using the * JavaFX, c# & WPF * or * Java3D * so that I see the image with depth?
  I tried various JavaFX 2 demos, but none appeared "miraculously" with depth, even when I use the 3DScreenActivator.

  Thank you very much
  and I would be interested in communicating with everyone who's going in that direction, or wants to.

  > How can I program it using JavaFX, c# & WPF or same Java3D so that I see the image with depth?

  I don't think it's a good place for this theme, here you can find common users of Toshiba and not 3D programmers and experts.

  But I found this doc from Toshiba:
  + Qosmio F750 portable free glasses 3D - content taken in charge and software +.
  http://APS2.toshiba-tro.de/KB0/TSB1A037N0000R01.htm

  glasses free 3D games is already supported, but some updates are needed:
  + Support of glasses free 3D mode for games on the Qosmio F750 +.
  http://APS2.toshiba-tro.de/KB0/TSB1C038G0000R01.htm

• How to watch 3D without glasses on Qosmio F750-11R?

  Hello, I know that this question has been asked many times before, however, I can't seem to find a useful answer (related to my laptop series) anywhere.

  Most of the time the answer is to re - install the X-tunes already pre-installed.
  It is not preinstalled. I updated all the drivers and downloaded all of the proposed programmes.

  It doesn't always seem to work.
  I can convert something in 3d, but then it shows just the screen twice vertically.
  I thought that this should be easy (as suggested by the ads and the very useful note packed with the laptop). I'm not a computer genius, but it shouldn't be this hard?

  Can someone please explain to me how to do this?
  In addition to the 3d dvd I would like to play MP4 and. AVI files as well.

  Thank you!

  Hello

  > How to watch 3D without glasses on Qosmio F750-11R?

  First of all its imporntat to know if your Qosmio F750 is equipped with a 15.6 LCD FHD GLASSES FREE 3D.

  Only F750 units with a glasses free 3D LCD supports 3D without extra 3D glasses.

  Find the plug on the page of Toshiba for the Qosmio F750-11R and unfortunately, it seems that the laptop does NOT support free glasses 3D display.
  http://nl.computers.Toshiba-Europe.com/innovation/product/Qosmio-F750-11R/1115695/toshibaShop/false/

  This is also the reason why the X-tune software was not preinstalled on your laptop

• Bluetoothis is not ready - Qosmio F750

  Hi all

  I only notice this problem recently with my Toshiba Qosmio laptop, in the past I was able to connect to my bluetooth very well (I use it to connect the controllers like a Wii remote). I left it for about a month or two without using it and the other day I went to use and got the error code "Bluetooth is not ready."

  I tried a lot of troubleshooting methods found on this site but I seem to be having much luck restore my bluetooth, so I thought that I ask here before I wreck something on my laptop.

  I have a:
  PC laptop Toshiba Qosmio F750
  Laptop
  Note: 5.9
  processor Intel® Core i7-2670QM CPU @ 2.20 GHz
  RAM: 8.00 GB
  System type: 64-bit operating system

  I have windows 7 and which was already installed on the computer when I bought it under a year previously. I also have an Atheros AR5B195 Bluetooth device, or so it is said in my laptop on a label. Here are some screenshots of my question, the first screen shot in a compilation of photos:

  http://i234.Photobucket.com/albums/ee262/jrich144/Untitled-6.PNG

  Squares:
  Red - me trying to connect a device and or remove a device but get "bluetooth is not ready" message
  Blue - trying in-between bluetooth support
  Yellow - option Bluetooth, bluetooth is turned on
  Green - Log viewer for BTHUSB, event ID 17

  http://i234.Photobucket.com/albums/ee262/jrich144/Untitled2-1.PNG

  Photo, Bluetooth RFBUS Device Manager (this device cannot start (code 10)).

  I tried to reinstall the bluetooth stack and the filters one or twice (not sure if they were good) I also tried a Microsft Quickfix, which ends up being not not compatiable with my system. Whenever I tried a new method I backed up my computer with a restore point system and if the method failed I reloaded my system restore to be if all point right back to square one.

  I would appreciate all help and if I need details more information please let me know. Thanks for your time.

  Hello

  Just at the beginning, I would like to know if you have enabled the BT ON using the FN + F8 key.

  I see the message: bluetooth is not ready
  So I guess it has not been selected by FN + F8