I have FF 40.0.3, Win 10, FF will minimize and not recover.

Similar Questions

• I have a HP C4750 printer that only prints in color and not black - what is the solution?

  This happens if I print from my PC or the printer itself.

  Contact HP or visit their web site and see if there is a diagnosis or test processes that can be run on the printer to determine the problem.  If it will not print black from the printer itself then it is a Windows or a driver problem, you need to find the cause of the failure in the hardware of your printer.

• Have trouble getting this script runs on the 1 cluster and not others

  Hello

  I'm trying to get it to run on a single Cluster, currently I run it on a single host, but I would like to run on a specific Cluster.

  Get-vmhost host1.lab.local | Get - view). EnterLockdownMode() | Get-vmhost | Select Name,@{N="LockDown; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto name LockDown

  I tried this, but this error message:

  (Get-Cluster 'Local' | get-view). EnterLockdownMode() | Get-vmhost | Select Name,@{N="LockDown; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto name LockDown

  Error message

  The method call failed because [VMware.Vim.ClusterComputeResource] contains a method named "EnterLockdownMode".

  On line: 1 char: 51

  + (Get-Cluster 'Local' | get-view). EnterLockdownMode < < < < () | Get-vmhost | Salt

  ECT Name,@{N="LockDown"; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto N

  SOUL LockDown

  + CategoryInfo: InvalidOperation: (EnterLockdownMode:String) [].

  RuntimeException

  + FullyQualifiedErrorId: MethodNotFound

  How can I run this for a single cluster and not the other clusters.

  Thank you

  Mike

  Try something like this

  Get-Cluster local | Get-VMHost | %{    (get-view $_).EnterLockdownMode()    $_ | select Name,@{N="LockDown";E={$_.Extensiondata.Config.adminDisabled}}} | ft -auto
  

• I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for use Win 7 I had previously and have drives. Then go to Win 10. Where should I start?

  I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for the use of Win 7, I had previously, and have records. Then go to Win 10. Where should I start?

  You can start here

  Use Bootcamp to install Windows

• I have the product key for Win 7 Home Premium OA on laptop - I need to re - install due to virus, how can I get a copy?

  Win 7 Home Premium

  I have the product key for Win 7 Home Premium OA on laptop - I need to re - install due to virus, how can I get a copy?

  I have the product key for Win 7 Home Premium OA on laptop - I need to re - install due to virus, how can I get a copy?

  See the response of Mike Hall, but also, note the following:

  What virus do you have? How do you know if you're a? Reinstalling Windows due to a virus is almost never required and is usually exaggerated way. It is normally much easier and much less likely to cause you problems if you delete the virus with a good antivirus program.

• Win 7 Security Cleaner Pro is not let me access anything be it because it says its dangerous but I have McAfee and McAfee says: all right.

  Win 7 Security Cleaner Pro is not let me access anything be it because it says its dangerous but I have McAfee and McAfee says: all right. Any suggestions on what to do?

  Original title: Virus problems

  Win 7 Security Cleaner Pro is a rogue program, it means that your PC is infected with malware

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-security-cleaner-Pro

• Satellite C50-C023 - Win 8.1 PCI Device driver not installed

  Hi This is my 1st post here

  My friend bought the satellite above with 10 Windows pre installed on it. accounting software, it should run on it is not compatible with win 10.

  He asked me to help downgrade to win 8.1. I called and they said yes everything will work, but Toshiba is no guarantee nor provide a decommissioning. That is to say, do so at your own risk.

  So he decided to go forward and we bought 8.1 and I installed it. now, everything is ok except for 1 PCI device display as not installed in Device Manager. Any help in this matter would be greatly appreciated. It's one thing to chipset?

  Kind regards

  John

  Hello

  Recently, I helped a friend the low-grade sound C50-C023 to win 10 to 8.1 Win.

  Everything went well except that now, I in Device Manager my PCI device not installed and no updates can be found anywhere. I have just completed do all Win 8.1 updates but still have this problem

  Any help would be greatly appreciated.

  Kind regards
  John

• Portege R500 upgrade to Win 7 64 bit: lost and no scrolling touchpad driver

  Dear all,

  I have updated my portege R500 WIndows 7 64-bit OS and had the following problems:

  1. as a first step the touchpad scrolling has worked well (with no driver installed) but then it works more... so I tried a driver but
  2. There is no driver for the touchpad (Alps) which is recognized as a compatible mouse PS
  BTW, uninstalling and reinstalling didn't work and I searched a lot on the web but found no solution.

  I downloaded the drivers for VISTA 64 bit, is it safe to use?

  Appreciated advice, thank you.

  Simone

  Hello

  > I downloaded the drivers for VISTA 64 bit, is it safe to use?
  Yes, it s safe you can try to install the drivers for the touchpad for Vista in the worst case, you will get an error message that this driver is not compatible or will not work.

  But look man there is Win 7 Alps and Synaptics touchpad drivers for Win 7.
  The drivers were released for other series of laptop.
  Check the Satellite L500 area for example

  I have Win 7 64 bit drivers.
  Synaptics v14.0.11.0
  Alps Electric v7.x5.303.117

  Welcome them

• Win 7 of the touchpad does not work on Satellite C855-21V

  Hello everyone!

  I have a Satellite C855-21V and it came with Windows 8. After a week of disaster I m sure I want never again a Windows 8 on my computer!

  So, I installed Windows 7 and can find all the drivers somewhere in the internet.
  The only thing that does work is the touchpad.

  8 Win driver Don t work and other models the driver win 7 do not work.
  Does anyone know what brand the touchpad or where to find a driver for win 7?

  Thank you all for the help!

  Best regards

  Frank

  Hello

  First and foremost the touchpad should work after installing Win 7.
  The Windows contain a standard touchpad driver that needs to control the touchpad.

  Of course the extra Synaptics driver installation would give more willing touchpad (fingers to scroll, etc.), but also without the driver Synaptics touchpad should work.

  In any case, I already mentioned the Synaptics driver that you can download that here:
  http://www.Synaptics.com/resources/drivers

  PS: is the active touchpad? F5 turns the touchpad on and off

• Re: Satellite L300-254 - need Win XP driver for WLan and FN keys

  I have laptop satellite L300-254 pslbge and have problems with drivers. This computer was emty (no recovery disk or drivers) then I bought it.

  I installed Win XP SP 2 disabling AHCI. Instaled the common Modules, Chip Set Utility, and when I try to install the drivers of controls (for the Fn keys). It is said that I did not install common Modules.

  Tried to install the WiFi drivers (realtek, but I do not know if the wlan hardware is realtek), but it is not recognized in Device Manager, (? ethernet controller), Lan works well.

  So please help me with wlan and the Fn keys problems

  Hey Buddy!

  I m using a Satellite L300 too with XP and I t notice any problem. It works correctly and the Web from Toshiba site displays all the drivers and tools for this.

  However, firstly everything that you should make sure that you have installed all the drivers for your laptop. The site Web of Toshiba shows only Realtek driver for WIFI then I guess you have Realtek WLAN card. You can run setup.exe to install drivers or if you get an error message?
  If you are not sure, you can also check what WLAN card you have on this site:
  http://www.PCIDatabase.com/
  The vendor and device ID, you can see in-online WLAN card properties Device Manager.

  Toshiba tools for FN keys, I can only say that you must install applications first Toshiba and then all the other common Modules. Common modules are required for all Toshiba applications works. Then remove the tools installed Toshiba and use this installation order that I used successfully on my Satellite L300:
  Toshiba Common modules
  TOSHIBA Hotkey utility
  Toshiba Touchpad POWER utility
  Toshiba Utilities
  Toshiba controls
  TOSHIBA Power Saver (not necessary, but very nice tool).

  I hope I could help a bit.

  Good bye

• Cannot install Atlantic Quest - Atlantic Quest. The ink is not that a Win 32 application___ valid %1 is not a valid Win 32 application

  Original title: I bought Atlantic Wild Tangent __I Quest get the next Quest message___C:\ProgramData\Microsoft\Windows\GameExplorer\668DAD4E-7352-4D98-B28E-4...\Atlantic. The ink is not that a Win 32 application___ valid %1 is not a valid Win 32 _ application

  I have a Dell Inspiron 580 i3 6 GB ram 1 TB disk 64 bit (only a month)

  I got an exe file. record and I think it's the file that was the problem. In the folder of the file (that I have redownloaded 6 times), I noticed that he was not an exe WT. like my other games have.  In any case, I asked for a refund and downloaded the game even MSN. Everything works now. Thanks for your response!

  Slyrex

• Is there a way to update (05.16.12) remove Trojan: Win/32/Orsam! RTS and worm: Win/32/renocide. THERE

  I just got the results of the Microsoft 1.0.3001.0 security scanner (msert.exe modified 05/11/2012), indicating that I have Trojan: Win/32/Orsam! rts and worm: Win/32/renocide. Y I use Norton Internet Security and are satisfied with their products for 20 years. I would have thought that NIS would have captured these and have them destroyed, but apparently not. According to Microsoft, they are also changing their programs to eliminate these parasites. I am running Windows Vista Home Premium, Service Pack 2, on a desktop HP Pavilion a6400f. I also have a stand-alone Seagate harddrive campaigns, that while I was watching some the data blinking, picked up another 'virus '. I think it's in my C:\ drive backups. I would appreciate any useful information to remove completely the latter, such as mert indicated that they were only "partially removed? My PC is set to automatically receive updates from Microsoft and HP.

  Hi, Fireballs517,

  Search in the Norton quarantine files - is quarantined virus?  Sometimes, this watch as always on the system when it is not deleted.

  Execution of Microsoft Security Essentials: start here - https://support.microsoftsecurityessentials.com/

  and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  Otherwise:

  You can start here: https://consumersecuritysupport.microsoft.com/ or here: http://support.microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab0 for the help and support for malware infections.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Problem with Win 7 64 bit OS and itunes with the corefoundation.dll?

  I am running Win 7 64 bit OS. When you try to run iTunes I get error message: the program cannot start because corefoundation.dll is missing. Try to reinstall to see if that solves this problem.
  is there a problem with itunes and Win 7 64 bit? or by reinstalling the dll file fix?

  Uninstall and reinstall hopefully should solve your problem.

  MobileMe: "CoreFoundation.dll was not found" or "Apple Application Support is missing" alert
  http://support.Apple.com/kb/TS2211

  How to fix Corefoundation.dll errors
  http://www.dll-error-fixes.com/resolve-corefoundationdll-missing-errors/

  Have you tried right-clicking on the program.exe Setup and selecting "Run As Administrator" option?

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

• T61 with Win 7 RTM will not sleep on the current, will sleep on battery

  You wanted to start a new thread on this since the similar to the previous thread presents the beta version of Windows 7 and other issues while I and at least one other people have this same problem with Win 7 RTM.

  My T61 (8891-CTO) won't go to sleep / suspend when it is plugged into the current running Win 7 RTM and the current drivers Win 7 Beta.   It will be put into hibernation on current alternative.  He'll sleep / suspend very well when it's on battery.

  When the current alternative, the display dims when I try to sleep, but it will never actually suspend.   Move the rear mouse lights up the screen and gives the Windows login screen.

  Like everything else works very well and sleep works on battery but not AC, I have to assume that it is a driver problem.

  Any help appreciated.

  Thank you

  Michael

  I realized what was causing the problem on my system, so maybe this will help someone else.

  The Windows Media Player Network Sharing Service prevented my T61 to sleep.  I stopped and disabled this service.  Sleep works fine now.

• I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade.

  Original title: clean install Win 7 64 bit

  Like others, I have a problem with a clean install of Win 7 64 bit Proffesional. I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade. A lot of the buiult in functions do work not (Wireless; Hiring of video, USB Ports etc.) and to top it all off I get now blue screen errors...

  If installing from an external DVD drive, crosses, it shows that the HARD drive has already 4 partitions.

  Partition 1 (e :)) Disk0

  Disk0 Partition 2

  Disk0 3 (C :) Partition System

  Disk0 Partition 4 hidden OEM Partition.

  So far I have just selected Heve installation on Partition 3 C: System.

  Y at - it a utility that I can use to retrieve the data from the OEM Partition I want to return to the initial state by default if possible.

  If not what is the best utility to use repartition (how many and what size?) and format the HDD.

  Cordially chrisxsmith

  The best you can do is to contact Samsung and request recovery media to restore your system to its factory default state.

  Call Samsung to get a recovery disc - to find a phone number for your location:

  http://support.Microsoft.com/GP/oemphone/

  Thank you Andre, very appreciated, unfortunately Samsung and their Tech Support here in the UNITED Arab Emirates was not as useful.

  I managed to keep the button restore during the 5 sec boot process that initiated the request 5 restore Samsung which was then able to take the original installation of the hidden Partition image.

  Fortunately the issue is resolved.