I have improved my Travelmate 7730-10 Windows. The WiFi button is no longer operational.

Similar Questions

• I have a HP Deskjet D4160 printer. The reset button will Flash. Diagnosis HP said there was a "breakdown of pen", but he didn't give any directions on how to fix it.

  Original title: breakdown of pen deskjest d4160

  I have a HP Deskjet D4160 printer. The reset button will Flash.  When I ran the HP diagnostic he said there was a 'pen failure' that had to be fixed, but he didn't give any directions on how to fix it.

  Hi Fred Cornell,.

  ·         You have any problems with the performance of the printer?

  ·         What operating system is installed on your computer?

  ·         The printer works well before?

  You can check the link mentioned on official website of HP that describes the problem for the specific printer model you are using.

  Flashing lights in the HP Deskjet D4160 printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00635074&cc=us&DLC=en&LC=en&product=501857#n129

  Alternatively, you can contact HP support for help on the issue.

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Let us know the results.

• I think I have firefox 5 and can not find the orange button on the left, the menus or toolbars so what can do

  I have a computer HP dv6-3225dx laptop running Windows 7 and Avast a/v.I think I have 5 ff but am not sure because I can't find the orange button mentioned in the video on start-up, I can find no navigation or toolbars. I've been a loyal user of ff since you first started the latest version of ff 3.6 and never had a pblm like that. I uninstalled Chrome because of this kind of hassle. I'm just an old non-techie who has not had time to re - learn what seems to be a bunch of esoteric stuff. Can you help pls. Email me I can not find my questions on this help page. TKS a lot.

  Looks like the Navigation bar is what you have now. What happens when you press the Alt key? You see the Menu bar, at least temporarily until you press another button or click a mouse button. When this Menu bar is displayed, press the V button to open the view menu, and then move the slider on the toolbar and click on the menu bar menu item. The Menu bar should then stay open all the time and you won't need to deal with the orange Firefox button.

• I can't see Start button and have to turn off my computer using the power button / stop

  When I use Mozilla, I can see no longer the button 'Start' at the bottom left of the computer. The only way that I can disable the computer is holding the "Power" button What I did to cause this.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

• Windows XP will not be closed. I have to press the power button to turn it off.

  original title: WINDOWS XP WONT SHUT DOWN - I HAVE power to the BOTTOM BY pressing POWER BUTTON COMPUTER

  WINDOWS XP DOES NOT - STOP I HAVE TO POWER COMPUTER DOWN BY PRESSING THE POWER BUTTON

  I had a computer that had posted these symptoms.

  In the end, I did the following:

  1. in Control Panel, "Power Options."

  2. click on the "tab APM" " ".»

  3. check "Enable Advanced Power Management Support"

  4. click on OK

  Check the result.

  Reference: http://support.microsoft.com/kb/313290

  Hope this helps

  Post back if necessary

  ________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have 8 64-bit windows. my volume icon is no longer in the area of the taskbar. It's in the settings. How can I move this back to the taskbar. contacted hp three times. no help from them.

  I have 8 64-bit windows. the volume icon is no longer in the toolbar area. It's in the settings area of the computer. How can I move this back to the toolbar?

  Hello

  I don't know why it would be... does show the taskbar when you are on the desktop?

  As a last resort, you can try the "turn system icons on or" and "restore default icon behaviors."

  The parameter "turn system icons On or Off ' applies only to the taskbar...

• The taskbar, the Start button is missing on Windows 7.

  I really want to use my Windows desktop but can't the bottom task bar or the left side options where usually find Windows Office and other programs that I use.

  Original title: task bars have disappeared.  Could not even find the Start button

  I hate it when this happens. Just restart your computer.

• Wifi button does not work after upgrade to windows 7 to windows 8

  Hi all

  I use a computer hp laptop pavilion. My wifi button stopped working after the upgrade to Windows 8. I installed the latest drivers wifi but the wifi button does not work on wifi. Help, please

  Concerning

  Wandi

  Hello

  I use a hp pavilion dv6 7030ei.

  I solved the problem of my wireless button not switching not wifi enabled or disabled. My laptops wifi button now works perfectly.

  I have has been Manager of access devices, then selected, network adapters

  -Click with the right button on intel Centrino Wireless - N 2230,

  -then click on uninstall and then uninstall. Restarted my PC.

  Then bang! my wireless button started working! I don't update this driver up to what Microsoft or intel acknowledges this problem caused by the wifi drivers 8 windows and provides an updated driver that is causing the problem I encountered.

  Thank you all for your comments.

  Concerning

  One_D

• I have Acrobat professional 9. I moved it to my new computer Windows 10. Whenever I have printed on a home printer it ask again me if I want to improve and I only have 12 days to do it. How can I get rid of him. I have a valid license. What is the cost an

  I have Acrobat professional 9. I moved it to my new computer Windows 10. Whenever I have printed on a home printer it ask again me if I want to improve and I only have 12 days to do it. How can I get rid of him. I have a valid license. What is the cost and benefits, the upgrade to Acrobat 9 professional to the latest version (I think it's X)

  No, X is not the last. In fact, X, as 9 is now unsupported. After X XI, after that XI was DC. DC is the current version. No upgrade price from 9 more, unfortunately. You can subscribe to DC, and this is recommended because it gets new features faster and includes future updates (probably will be necessary as Microsoft moves to Windows 10 edition when they feel like it, instead of waiting for Windows 11/12 etc..)

• I have improved my i5 Ideapad Z580 to Windows 10. Big mistake?

  I took in all messages from Microsoft insisting on the fact that my computer was completely compatible and that I should upgrade to Windows 10. It does appear to me that I should have checked the Lenovo Web site first to be sure. After the upgrade, I noticed two things: (1) the system seemed to work fairly well, and (2) I couldn't find Dolby Home Theater v4 (one of my absolute favorite programs). When finally, I looked on the Lenovo Web site, I found the following page with the title, 'Dolby Home Theater does not work after upgrade Windows 10' (https://support.lenovo.com/us/en/documents/ht104006).

  When I checked the 'supported upgrade Windows 10 list' (https://support.lenovo.com/documents/ht103535), as indicated on the page, I saw that Ideapad Z580 was not on it. The page passes, saying that if your machine is not on the list, "drivers have not been updated for this machine, and Lenovo is not recommended an upgrade of Windows 10.» The page continues with possible solutions, but does it make sense to try again?

  Then I found another page site called Lenovo, 'Windows 10 Upgrade Guide - IdeaPad Lenovo Notebook' (https://support.lenovo.com/us/en/documents/ht103611). The news here was not better. He said, 'the following listed computer models include hardware components not fully compatible with Windows 10. Therefore, the upgrade of these models to 10 Windows is not recommended. "Unfortunately, Z580 is on this list.

  There are therefore, after Lenovo, hardware and software problems, and two recommendations DO NOT upgrade the Z580 to Windows 10. I did the upgrade. I have not run each program and I'm even not sure that all programs, other than the Dolby Home Theater, obtained through the upgrade (for example, Youcam have not). But the system seems to work pretty well; It may even work better she did it under Windows 7. I really miss the Dolby program. I have 30 days from July 29 to decide if I want to go back to Windows 7. So I have a few questions:

  1. as the system seems to work without major problems (outside), I should stay with Windows 10?
  2. If I stay with Windows 10, I should try the solutions described in 'Dolby Home Theater does not work after upgrade Windows 10' (https://support.lenovo.com/us/en/documents/ht104006) to restore the Dolby Home Theater?
  3. given that Lenovo has said that the Z580 has "not fully compatible with Windows 10 hardware components", am I headed for problems if I continue using Windows 10?
  4. given that pilots who do not have been updated, at least for the Dolby program and perhaps for others, it would be better to go back to Windows 7?
  5. is it possible that Lenovo will eventually update these drivers? If so, when does anyone know?
  6. I've heard that going back to Windows 7 can be very tricky. It is worth?
  7. If missing pilots as well as hardware components which are not completely compatible with Windows 10, why my system seems to work correctly?

  Sorry for the long post. I know there are some posts on this Forum that address these problems, but they are for a year - literally of August 2015 - and things possible has changed since then.

  Thank you in advance for your help!

  Hello mgsilv,

  Welcome to the Community Forums of Lenovo.

  I'll give you my view on your questions.

  1. as the system seems to work without major problems (outside), I should stay with Windows 10?

  It is up to you. The fact that your model is not supported means that Lenovo has not tested some older models. The way I see it, if not tested, there is no guarantee that it will be, or will not work.

  2. If I stay with Windows 10, I should try the solutions described in 'Dolby Home Theater does not work after upgrade Windows 10' (https://support.lenovo.com/us/en/documents/ht104006) to restore the Dolby Home Theater?

  If I were you, I will try the solutions, especially as long as you have the option to return to the previous operating system. Be sure that the system restore is enabled and works. It would not hurt to create a Restore Point before any change of Dolby. You also have an option to restore the drivers by using Device Manager in Windows 10.

  3. given that Lenovo has said that the Z580 has "not fully compatible with Windows 10 hardware components", am I headed for problems if I continue using Windows 10?

  I can't answer because I don't know what kind of changes Windows 10 will in the future, and if your hardware and/or software will continue to be compatible...

  4. given that pilots who do not have been updated, at least for the Dolby program and perhaps for others, it would be better to go back to Windows 7?

  See my response to #1.

  5. is it possible that Lenovo will eventually update these drivers? If so, when does anyone know?

  I can't speak for Lenovo, but given all new computers with OEM to catch up, I doubt that they go too far back to update the drivers for the older models. You can always keep checking back to the list of compatibility and drivers on Support to see if anything changes.

  6. I've heard that going back to Windows 7 can be very tricky. It is worth?

  I have not heard that.

  7. If missing pilots as well as hardware components which are not completely compatible with Windows 10, why my system seems to work correctly?

  It has not been tested. This does not mean that it has been tested and failed.

  Sorry for the long post. I know there are some posts on this Forum that address these problems, but they are for a year - literally of August 2015 - and things possible has changed since then.

  For some models there.

  If I were you, I would continue to use 10 for a week or so just to be sure everything works (printer, ports, your old software, etc.). If you can't get absolutely Dolby or anything else to work, weigh priorities, taking the Windows 7 End of SupportDates.

• I have improved my AZC-606 to 10 Windows without updating the BIOS of last year

  This is a step that I completely missed, as far as I know at the time, that acer had no information about the update and it's the first time I installed a Windows operating system - zero that I leaned on for the characteristics of the facility he said nothing about the BIOS (and there was nobody at Acer). Windows 10 has worked without problem on the machine. The only problem I had on a regular basis (and not always, but most of the time) is when the computer restarts it stalls on the Acer screen. I usually don't bother using the option restart. All that said, my experience of Windows 10 has been pretty good, and the machine running on most of the time was reliable, but I'm at a point where I want to go back and do a clean Windows installation.

  Now, I used the media creation tool to make an ISO. But the last time I used the MCT to paste directly to a flash drive, then maybe I'll do that once again. On the BIOS, I am a total n00b, so I don't know anything about. I assume it's something that I can still do / have done for me before installing Windows if I didn't not messed up already enough things. I'm kind of fishing for the answers that I have not yet to have questions for.

  What are my options, and what is the best option for me at this point? As I said, the Windows front-end runs under the best conditions in the State, and this backend that can go on is just invisible to me. Restart the computer just seems out of whack.

  Sorry to be verbose and vague.

  Since you always have a working windows installation, you can update now, and then perform the clean installation.

  Updating the BIOS is very simple and simply follow the instructions in the Readme inside the zip package.

  But firstly check you current BIOS version:

  key of the Windows logo + x

  Run

  type

  Msinfo32

  Check the BIOS DATE/version

  the latest version of the BIOS is P11. A4

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_P11.A4_A_A.zip?acerid=635513517099228329...

• I have improved my SB in windows 7 and I can't find my bookmark in windols.old

  How can I 'restore' my favorite, I had when Runic with win - XP?
  How can I 'restore' all the Add on, I had when Runic with win - XP?

  You need to locate the old profile folder in backup windows.old.

  In Windows, the location is:

  • XP: C:\Documents and Settings\ < user > < profile > \Application Data\Mozilla\Firefox\Profiles\.
  • Vista/Windows 7: C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.

  "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders

  See http://kb.mozillazine.org/Show_hidden_files_and_folders

  See also http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• ACER Travelmate 5760 with Windows 10, cannot detect the external projector

  I have an ACER Travelmate 5760. I have upgraded to Windows 10, because Microsoft is launching a few checks and said that I would be able to upgrade. But now, the laptop cannot detect an external projector or monitor. Is there a driver that I need to improve?

  Thank you

  Winifred

  When you connect your projector, if you press the windows logo key + p, are you able to select expand and check if the projector work?

  also, if you right-click on your desktop and choose the settings display, is the acknowledged projector?

  How to connect the projector?

  on the drivers, you try to uninstall the real Intel VGA driver and reboot with your laptop connect on the web and let windows update find new drivers as appropriate.

• Renstalled Windows XP and installed SP3 now I have no sound I hear static in the speakers but no sound.

  REFERENCE DELL GX60 SFF
  OK hear goes: Windows Xp Home edition, ver.2002 was SP2. Celeron (R) CPU 2.4 GHz intel 2.39 GHz 512 MB RAM
  OK you can stop laughing now. I know its out of date and I know that I will eventually improve windows (getting another computer at the moment), is
  not an option. Now, my relic worked fine good healthy and not too fast, but it got me where I should go. Mainly to pay my bills, print them
  play games, etc.; you get the idea. somehow, well I ended up losing several programs and not knowing what I was done, I decided to reinstall
  Windows XP and also to install SP3 (bad decision!). I didn't know that my copy of resettlement was not installing many drivers, you had to put them
  yourself! Needless to say, I fumbled my way through, but I can not all sounds, oh I get this 'static' loud and clear when I turn the speakers off voltage
  but that's all. I've tried everything. Also, when I go into Device Manager and open sound, video and game controllers, it shows
  Audio codecs, Legacy Audio Drivers, Legacy devices of video Capture, media control and Codecs video (whatever that means).
  And when I opened the system devices, there is a yellow exclamation point in front: Intel (R) E75/25/E7520 DMA controller - 3594. (phew!).
  Well, I hope I gave you enough info.cause, I'm not that knowledgeable about computer technology. (I'm sure it's obvious LOL)  In any case
  Sir/Maam are unwilling to detach "sexist". I'll let you go, hope you can give me help on this issue, if I could I would just get a new one
  but I am living young 71 on S.S. Disibility and simply ends.  Not complaining do not. I am blessed. You have a wonderful and blessed
  day.
  Sincerely yours
  Mrs. Fannie M. Owens

  Go to your computer manufacturer's support web site and search for drivers of devices in Windows XP for your specific model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• I have a HP8710W recently upgraded to Windows 7 teacher how to charge LED working again?

  I have improved my HP8710W for Win 7 Professional to XP. Everything was going well after quick search for drivers. The only thing that doesn't work does not correctly is the charge LED which does not indicate if the laptop is charging or not. The battery level takes into account 54% when the power is connected and not an indication the power down 54% usually last about 1 hour. How can I get the LED indicator of charge to reflect what is happening in the charging circuit and the status icon to display with 0 to 100% accuracy?

  I think it might be time for a new battery. The upgrade to Windows 7 just happened to coincide with the end of the battery. Otherwise, keep loading up and empty. Don't let the battery go below 15-20%. The meter of the charge should obtain more specific that you run through a few cycles. Also check in the setup of the BIOS [F10] to see if there is a battery test.