I have installed the Spanish version of all the products, how can I have them all in English?

Similar Questions

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• should I delete the old version of firefox before installing a new version? If so, then how can I remove and how?

  I have an older version of Firefox and adobe on a Sony VAIO. I get telling me to update the pop-ups and also frequent failures when I try to use the browser. I try to upgrade. I go through the process of downloading, then try step execution and get a message 'not allowed '. I checked and I have administrator privileges, and I have disabled the firewall security software, thinking that it does not block the installation, but nothing works. Nobody knows if the older software are the cause and should be removed until the last version can go. Also, if this problem is solved I will have the same problem with Adobe?

  What version of Firefox is installed on the computer?

  You can find the full version of the current version of the current Firefox (37.0.2) in all languages and all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all/

  If you have a very old version of Firefox, then you might consider uninstalling this version of clean up the existing registry keys (especial the uninstall key).

  Be sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Check the Firefox program folder and delete the Firefox program folder if there are still files left in it.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.

  It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Start and all the missing icons in the Office how can I recover them?

  After downloading Microsoft 6 to 8, the bar start and all the icons disappeared from my office.

  How do their back on again once?

  Hello

  Method 1:

  Follow these steps and check if that helps:

  (a) start on your desktop.

  (b) press CTRL + ALT + DELETE to open the Task Manager.

  (c) in the Task Manager, click on the button new task on the general tab.

  (d) in the new task dialog box, type: ' Explorer to. exe' (without the quotes) and press OK.

  (e) the Office Windows should now appear.

  Method 2:

  Follow the steps in the article, and check if that helps.

  Your desktop icons are missing in Windows XP

  http://support.Microsoft.com/kb/330170

  Method 3:

  Also try creating a new administrator account and check if it helps.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• Now that I have downloaded files in the cloud how can I download them?

  New to this forum so excuse... I have uplaoded the photo files to the cloud of my studio computer. Now at home, I don't see how to download on my desktop at home. I suspect it is very simple but I would appreciate any advice. I use Photshop CS6. Thank you!

  Page files click on the thumbnail of the file to download. The download button is at the top right (see screenshot). Currently, you can download several files or folders at once.

  

• 2 days of scanning photos are missing or on the scanner, how can I get them off the scanner?

  HP Photosmart Premium e all in a single Seriers c310

  Since it's Vista and you mentioned scanning using the solution Center, you won't find a copy of the analysis on the scanner.
  If you are sure that you have selected the scanning to a USB key on the computer, but the disk have the images scanned, maybe try to look in your "My pictures" folder, for things like picture001, image002, or maybe scan001, etc. or subfolders with a name of "day of the month. If none is found, I'm afraid, you must re-run the scans and this time, select a folder/disk with enough free space.

• I've imported the new images from my camera and somehow deleted photos of my mother who were on the computer, how can I get them back?

  I need help, I imported the new photos and the next day my mother told me that she doesn't have a picture of him while he was probably because of me import new photos, I really need to get these old photographs, it is three years of images! It is a relief!

  1. download the free program Recuva by http://www.filehippo.com/download_recuva/ select a drive from the drop-down and click Scan to list everything > check Filename > Recover to recover all deleted files.

  2. in the alternative, the free food program here http://www.snapfiles.com/get/restoration.html

• I have installed PS 4.0 long ago and improved through v5 and v6.0.  When I migrated my XP PC to Win8 I couldn't migrate PS 6.0. Without program PS on my PC, I have to reintstall V4.0 but my PC will not read is not the CD of the V4.  How can I reinstall th

  I have installed PS 4.0 long ago and improved through v5 and v6.0.  When I migrated my XP PC to Win8 I couldn't migrate PS 6.0. Without program PS on my PC, I have to reintstall V4.0 but my PC will not read is not the CD of the V4.  How can I reinstall the product and bring it back to V 6.0? Thanks in advance.

  Each release of Photoshop, I installed has a serial number. I can see all but one of them in my products in my account on Adobe.com Adobe.

  To install an update with any previous version of Photoshop currently installed, you must update the serial number and a serial number of one of your earlier versions of Photoshop that qualifies for the upgrade. The prior munber could also be an upgrade of the prerequisites.

  Photoshop 3 was my first version of Photoshop as the serial number and the serial number of upgrade Photoshop 5 has been lost over the years. I jumped 4 Photoshop, Photoshop 6 and CS4 then the serial number for my products are all updated serial numbers.

  

• How will I know InForm minor version (build) before installing the product?

  Hello world

  If I was a developer (or you have always wanted to be), or had friends in Prod Dev, I would not distract here (so you call a warning).

  I need to know Oracle Health Sciences inform build number (aka minor version number?) without having to install the product.

  It is a dotted version number normally observed in properties extended to most recent or dll, as well as files exe in 'about system' - like 6.1.0.1.1009, for example.

  I need to know this '1009' part to install the package I will or will not be installed.

  It is not mentioned in the release notes and not tied the number of patch in the name of the archive downloaded.

  I tried to decompress data {#} .cab manually to check a few binary, but it must be a new format of InstallShield, so 7-zip and deballeurs as Universal Extractor cannot deal with it.

  It sounds ridiculous that I need to spend hours to build a full blown server and installing a product just to get acquainted with this thing.

  I must be missing something trivial (but see warning).

  I'm OK with any solution - a link to the reference doc that lists built for versions 6.X or a patch number formula (if it exists), or a tool confirmed to unpack this version of Oracle CAB format is used to inform these days.

  Can anyone help?

  Thank you

  -S.

  MargiS thanks!

  Moved to the Health Sciences Community.

  In addition, found a friend in the development, which explains the common rule for other products, which is used to inform both:

  If a product install media is supplied in the form of ISO image, then the last number name of file is the minor version, i.e. for InForm_60_x.y_zzzz.iso the build number zzzz.

  Answer to a person who can find an answer here.

  If this message appears to be in non-compliance with the subjects of this space, feel free to delete.

  Thank you

  -S.

• I have CS5 drives that were installed on an old laptop which is dead. I would like to reinstall this product on a new computer. I installed the disks on my computer, but I can't activate the product. Can you help me get a new serial number?

  I have CS5 drives that were installed on an old laptop which is dead. I would like to reinstall this product on a new computer. I installed the disks on my computer, but I can't activate the product. Can you help me get a new serial number?

  As far as I know, Adobe won't give you a new serial number

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• I have Pages version 5.6.1. How can I convert a document that I create in this version to an older version (Maverick) of Pages? I created documents in version 5.6.1 and I need for my colleague to open documents, but it has the ol

  I have Pages version 5.6.1. How can I convert a document that I create in this version to an older version (Maverick) of Pages? I created documents in version 5.6.1 and I need for my colleague to be able to open the documents, but it has the old version. I already clicked on 'option' and select 'duplicate' to get the prompt "save under". However, when I do this it does not to choose another version.

  To create a document that can be opened with previous versions of Pages, open the document in Pages, and go to the menu file (in the menu bar)-> export as-> Pages ' 09. Save the file and send it to your friend, if she can open it without any problem.

• I want to install a HD floppy Microsoft 2002, I have the keycodes, how can I do this? Windows XP, Works Suite 2002.

  I want to install a HD floppy Microsoft 2002, I have the keycodes, how can I do this? Windows XP, Works Suite 2002.

  Hi, Edward.

  Follow the steps listed here

• I want to install a HD floppy Microsoft 2002, I have the keycodes, how can I do this?

  I want to install a HD floppy Microsoft 2002, I have the keycodes, how can I do this?

  Microsoft 2002 what?

• I have a virus inches in my file and I lost all my files from the image. How can I get them back?

  I have a virus inches in my file and I lost all my files from the image. How can I get them back? Folder was on the desk. So please help me. All files were very important for me. Thank you.

  I have a virus inches in my file and I lost all my files from the image. How can I get them back? Folder was on the desk. So please help me. All files were very important for me. Thank you.

  =====================================
  Are you running Windows XP?

  Please post more details. The more information you share
  you chances of a solution.

  How do you know it was a virus?

  The virus has been removed?

  When the problem happened everything first?

  "Was" folder on the desktop? You say all
  folder is missing?

  The file might be in the trash?

  Is it possible that your files are still there but have
  become hidden?

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  If the photo thumbs reappear... they can turn washed
  outside. To clear this up... right click a thumbnail or a
  selected (highlighted) group or folder and the
  menu... Choose... Properties, uncheck the box.
  'Hidden' / apply / OK.

• I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product. Help

  I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product.  Now I have no anti virus.help please

  Hello

  It is a specific error of the AVG software. There are number of threads on the same topic on the forums of AVG.
  Reference:
  http://forums.Avg.com/us-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=Davo1330&subthemes=1

  http://forums.Avg.com/au-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=pcroft&subthemes=1

  See also:
  If you have problem install/uninstall/upgrade to update AVG: AVG 2011 + 9.0 + 8.x uninstall / re-install Instructions
  http://forums.Avg.com/ww-en/AVG-Free-Forum?sec=thread&Act=show&ID=110317

  I hope this helps.