I have no sound no audio device, do not know what happened

Similar Questions

• DirectSound resources such as the level of priority were already in use by an other appellant - have no sound - no audio device

  DirectSound resources such as the level of priority were already in use by an other appellant - have no sound - no audio device

  Hi CindySantonas,

  ·         You have made any changes recently?

  This problem can occur if your sound card is not configured in the Panel as default device for sound playback.

  Method 1: Follow the below mentioned article and see if it helps.

  Sounds may not play in programs and you receive an error message "0x8878000a" in the DirectX Diagnostic tool in Windows XP, Windows 2000, or Windows Millennium Edition

  Method 2: Run automated troubleshooting and check if it helps.

  Diagnose and automatically repair audio playback problems

• I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key

  I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key or any body help, I can't use it

  You must order a set of recovery disc for the computer from the manufacturer - this will install the appropriate drivers for your system automatically, as well as packaged applications.

  If you have not formatted the disk (or replaced) existing partition recovery may still be present - see your manual for details.

  It is possible to download Vista - see here for more details - http://www.heidoc.net/joomla/technology-science/microsoft/57-windows-vista-direct-download-links -, but note that it is not a simple process!

• I have no sound - "no audio device".

  Ive tried all that convenience stores to advise. Messages I keep receiver are "no active mixer devices installed" and the other is 'No audio device' message about mixing devices also told me how to install this to fix but the wizard does not recognize my noise problem and does not install "active mixers devices. Can someone PLZ HELP me GET SOUND? THANX

  Go to your computer manufacturers support Web site and then download and reinstall the audio drivers.

  If this does not help, it might be a hardware problem in which case you should contact the manufacturer for support.

• T sound recording have no sound period. my device is not plugged in, but it is. I can hear the speakers crackling so I know they work someone can help?

  As a first step I disconnect and then reconnect the speakers and it would work again, but so far nothing.

  Hello

  
  1. don't you make changes on the computer before the show?
  2. which version of the operating system are you using on the
  computer?
  
  Method 1:
  Try the steps in the link and check if this may help:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:
  If you use windows vista and windows 7, you can try the procedure described in "sounds of my speakers is crackling or distorted" link and check.
  Windows 7:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  Windows Vista.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• I deleted my browsing history and all my favorites have been removed as well, I don't know what happened and I can't seem to find them?

  I went through my computer to clear the history, what I have done before and ALL my favorites have disappeared. I can't seem to find anyway and I want to know if/how to get back them.

  What method did you use to remove your browsing history?

  Firefox instant guard of your bookmarks over time so that you can restore to an earlier date. You can try the procedure of recovery described in this article and see if Firefox lists all earlier dates you can choose: restore bookmarks from a backup or move them to another computer.

  Are they available?

• Satellite P30-145: is not an audio device in 'sounds and Audio devices '.

  Hi guys,.

  I've just corrected a problem with the help of a member of fantastic, but now I have another!
  My speakers suddenly decide to not work! I checked the volume etc. and alll was fine, but when I went to control panel > sounds and audio devices, it says I have no audio device!

  It worked fine this morning and I have nothing done havn't who could have done this.
  These problems I encounter are just spontaneous, I don't know what is happening!

  Anyone know how I can fix it and if nobody suspects the virus activity? (I did a scan that says that I don't have)

  I use a P30 145
  Thank you very much

  Hello

  Have you checked the Device Manager? The sound card appears correctly in the Device Manager or yellow exclamation marks appear?

  Have you tried reinstalling the audio driver? If this isn't the case, please try it.
  Of course, I recommend also updating the anti antivirus applications and scan the system for viruses and malware

• Server 2K 8 Remote Desktop no despite its "don't bring to the local computer" active, impossible to find sounds and Audio devices?

  I'm running Vista 64 to connect to a remote computer that has Windows Server 2008. When the remote desktop connection via, under the options for sound local computer that I "Make to this computer" activated. However I still get all the sounds, and the volume in the lower right corner icon has a red x on it. Under the heading reading devices, it says "no audio device is installed". In Device Manager, I don't see anything for sound and audio devices.

  I found an article that mentioned the sounds and Audio devices in Control Panel, however I have only 'His' option - which opens the same as right click on the volume with mute icon and choosing of reading devices. I don't see anything on the RDP Audio Driver settings.

  Here's a screenshot of my desktop remotely, with the Control Panel, Device Manager, and open windows of his:

  http://img27.imageshack.us/img27/959/screenshotxqp.jpg

  How to activate the sound remote desktop?

  Hi Tsaton,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it is linked to the issue in Windows Server 2008 machine. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.

• NO SOUND FROM AUDIO DEVICE

  NO SOUND FROM AUDIO DEVICE. I have Logitec PID:A836 Audio Device with no sound. It worked very well in the past. I tried to update the drivers, but the computer says that there are no drivers for the device? When I check my control panel under sounds and devices, he says I have no Audio device. Said material that I have no control of the media device. I have no CD or sound card. What can I do to get this resolved?

  Hi SteveRoop,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. when he says that there are no drivers for the device?

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2

  If the previous step fails then you will have to manually, download and install the latest drivers for the sound card on the computer by visiting the manufacturer of the computer or the website of the manufacturer of the sound card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Windows XP my sound recorder audio device is a DODEC Audio USB, the volume and advanced is grayed, how do he turned the back?

  I just installed a turntable to record albums. I installed everything simply by following the instructions. The volume of the sounds and advanced recorder is grey and everything I do doesn't change it. Can someone help me?

  Hello

  You can view these methods:
  Method 1

  Download & install the previous version of the drivers for the sound card and check if it solves this problem.

  1. type devmgmt.msc in the search box start and press ENTER.

  2. in Device Manager, expand the audio drivers listed in the list of devices.

  3. right click on the audio driver > click Surdesinstaller.

  4 restart the computer and install the downloaded software.

  Method 2
  
  In addition, if you use a recording program, update or reinstall the program registration.

  Method 3:

  Please follow these steps to enable the "Windows Audio" service:

  1. Open the control panel of Windows XP by (depends on your settings in Windows):
     By clicking on "start > settings > Control Panel.
     By clicking on "start > Control Panel.
  2. Open the "Administrative Tools" Panel by (depends on your settings in Windows):
     Double-click the control panel 'administrative tools '.
     Click on "Performance and Maintenance" and then "Administrative Tools".
  3. Go to 'Services' Control Panel by double-clicking it.
  4. Locate the "Windows Audio" service.
  5. Check the "Status" column to see if it is disabled.
  6. If it is disabled, click with the right button on the "Windows Audio" service and choose "Properties".
  7. On the general tab, change it "Startup Type:" drop-down on "manual".
  8. Restart your computer.
  9. Follow steps 1-6 to open the properties of the Audio service 'Windows'.
  10. Click on the 'Start' button to activate the Audio service 'Windows'.
  11. You will now be able to change the control panel 'sounds and Audio devices '.

• High definition Audio Device works not properly

  I use Windows 7 Home Premium with a generic "high definition Audio Device" that beat unexpectedly and I can't get it fixed. It seems that Windows thinks that the Audio device does not work correctly, except there is a red X on the speaker sign on my toolbar. I have no playback listed device, but there is a device under sound, video and game controllers. Its location is also "Location 0 (High Definition Audio Bus)". Please and thanks for the help!

  No, the Red Cross means no driver installed, essentially.

  Go to the site of the manufacturer of your computer, looking for support for your page, then download and install the specific audio drivers for W7.

  Re-post if it does not work. Do NOT rely on MS to do the update for you.

  See you soon,.

  Jerry

• Audio device does not

  Hello.

  I am a user of Windows 8 of 8 months. I was get annoyed with the permission boxes whenever I plugged it in my headphones or a speaker so one day, I clicked on 'Line In' and then 'automatic' or ' don't show this ' being restrained. I thought that would be nice. I always used my helmet on my laptop perfectly just before that time, but after that, I couldn't hear anything in the audio device as well. Whenever I plug an audio device, the sounds still come from the laptop itself. My devices work perfectly with other gadgets, so I know they are good.

  I have not done much in fear of accidentally touch something else and ends up on top of a problem, even more drastic. I'm just sad that I took this for granted permission box. I tried "Show disabled devices" and "Show disconnected devices" under playback in the window of sounds, but my devices are not detected as well.

  However, I noticed that when I plug my headphones, the volume of "Line-In" comes out in the mixer.

  You may need to make an adjustment using the applet of the control panel for the audio controller.

  For example if a Realtek audio controller opens the Manager Audio DD Realtek Control Panel applet.

  In the right column, the helmet must be a green circle.

  Double-click on the green circle and select 'Enable jack detection when the device is connected', then 'Helmet' > OK

  You should then get the prompt every time you plug a device into the headphone jack.

  If you do not have a Realtek audio controller it can be a similar setting.

• Satellite L300-19F and WXP - audio device does not work

  Hello

  I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

  BTW: he used to work on Vista.
  What should I do?
  And thank you

  -Download driver audio Realtek HD Realtek page.
  -Go to the Device Manager
  -Remove the sound card.
  -Remove the High definition Audio Controller
  -Restart the laptop.
  -Reinstall the Realtek HD audio driver

• audio device is not defined by default

  Hello people. I had a lot of trouble with my audio recent and the most recent problem is that my audio is not working properly and when I walked into the audio settings to test the volume controls that were set at the max I sometimes hear a low ding through my headphones. When I try to hear the ding once, I get nothing = / I looked in audio updates, but none of them seem not at this address. the strange thing that I can't understand, is that the audio settings to say that everything works. When I tried to troubleshoot I got this message "audio device is not set as default ' I looked in the settings again and can't saw no trouble. I use a pc laptop hp pavilion g7-1365dx. any idea would be appreciated

  I have it! seems so simple now... after the last 2 idea you I gave does not, I went into the details of the system audio just poking around again thinking it might hurt only is more then I had. I found myself for the 100' e times at least on the tab enchancments and just clicking on things I ticked 'disable all enhancments' even if it us no equity and applied, and boom, problem solved for now at least. Thanks for doing your best to help!