I have no volume control in my tadkbar

Similar Questions

• Qosmio G35-600 - controls volume control

  Hello

  I have a Qosmio G35-600. I could be wrong, but I'm sure that my volume control provides advanced controls and I had access to the entry monitor, which is now gray. I reinstalled my SigmaTel Audio Driver (qg600audiox.exe), but who return advanced controls or to provide access to the input screen. The volume control is Microsoft volume control version 5.1 (Build 2600.xpsp_sp3_odr.101209 - 1647: Service Pack 3).

  Any ideas?

  Thanks in advance

  Hi watson123,

  What input screen you mean exactly?

  On the right side of the Qosmio G35, you have the volume control wheel to adjust the volume. Using this wheel, you can increase or decrease the volume of the internal speakers or headphones but it doesn t offer more options. It s just to adjust the volume.

  The sound card is in the Device Manager correctly and you have any yellow exclamation points or unknown devices?

• No volume control icon

  original title: no control volume-a mystery

  Suddenly, I have no volume control.  When I use the control panal its SNA Manager click "control of colum icon or I get a mess install no volume control.  I have sound I have the latest Realtek. Whence ' volume contro disappear?

  Bill K

  Hello

  Before performing a reinstallation of Windows XP, I suggest you perform an upgrade on the spot is also known as a repair installation. This repair any Windows damaged with fresh copies files and leave you the settings and personal files only.

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  http://support.Microsoft.com/kb/978788

  Important: make sure to save all your date before performing the repair facility.

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

• I need to add a volume control program to my xp

  I want to have a volume control in my taskbar, but it says that I need to add a volume control program and I can't find

  Hello

  Perform the steps listed in the article below and check. If the problem persists, reinstall the sound card drivers and check.
  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add
  http://support.Microsoft.com/kb/319095

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All the sounds that are specifically related to the Microsoft system works not-missing the system tray volume control and Accessories Entertainment empty folder.

  I have no volume control icon in the system tray and my Accessories Entertainment folder is empty.  I can play the sound through iTunes and VLC media player but is no longer the Player Windows Media can play CDs or mp3 files.  I have more Microsoft system sounds and the sounds of a large number of online streaming sites no longer play unless I can their route via iTunes or VLC media player.  Windows Media Player says missing codecs if I try to play mp3 files.  I have upgraded to Windows Media Player 11 to see if that would bring codecs, but without any result.

  My problems were not related to the missing CODECS.

  I knew the sound on my system was basically correct, given that I was able to listen to free VLC Player I downloaded to replace the Windows Media Player while he was not working.

  However, the solution to my problem of noise was really simple, but the answer was just very complicated track.

  I noticed that a lot of the chatter about similar problems on other forums was related to Adobe Flash Player.

  I had recently upgraded to the latest versions all Adobe products on my system.  I didn't make the connection that Adobe software could affect all the sounds of Microsoft.

  Finally, after doing a Google search on Adobe Flash Player issues, I found a partial solution:

  Here's an exact quote:

  Very well, the problem is really the wavemapper mapping in the registry of Windows such as reported by a member of the forum.

  All you have to do is to open the registry editor by going to start menu, run, type regedit, then Enter.
  After that, in Registry Editor, navigate yourself in the left pane until you reach

  My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32

  And then in the pane, right-click and click New, select string value, enter "wavemapper" (without the quotes, of course), ENTER, enter "msacm32.drv".
  Come in.

  Well, of course, it didn't work the first time. I received this message:

  the Registry Editor cannot rename the new value #1. The specified value name already exists. Type another name and try again
  
  I was puzzled for a while, until I saw someone in the forum with a similar problem mentioned that they had found a fix for this problem by granting permissions subkey. This led me to Google search for registry permissions.

  After that here, that's what I had to do, and although it seems that a lot of steps, it's really very simple:

  Once I had reached the drivers32 registry entry I pointed out the entry in the right pane. Mine said (default) REG_SZ (value not set). I then clicked on change on the Bar Menu and clicked on permissions on the menu drop down.

  This opens the permissions for Drivers32. I highlighted at the entrance of the Administration and click the Advanced button.

  This opens the "Advanced Drivers32 security settings. I made sure that I was under the permissions tab in this window. I noticed that the box called "inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here"was checked. Yet once, I did ensure that the entrance of the Administration has been highlighted and then I clicked on the button change.

  This opens the "permission for Drivers32 entry. I chose "this key and subkeys" apply to: falling to the bottom of this window. Then, I checked the full control checkbox. I clicked on OK.

  I clicked on apply advanced Drivers32 window security settings.

  I clicked on apply permissions for Drivers32 window.

  Once that I had done it all a lot more entries appeared in the right pane for Drivers32 including my wavemapper entry. This is where all along; Quite simply, there is not all the permissions to do anything, including being in the registry pane.

  I left the registry and now all my sounds are back and the volume icon is once again in my system tray. Who would have thought?

  Hope this helps someone else.

• Lack of volume control and Greyed out in the taskbar properties

  Until recently (past two months) it was never a problem.  When I bought this computer there nearly two years, I created my taskbar which included my volume control.  He has been there since then.  I have Vista, Service Pack 2.

  I have not changed hardware.  But in the last two months my volume control dissappers of the taskbar every once in a while and when I go into the taskbar properties, the control volume is grayed.  It's VERY frustrating because I can't find another way to implement volume control.  Fortunately I have a volume control key on my keyboard and use it when necessary.

  I did a search about this problem and see that a lot of people have the same problem.  WHY?  If this happens due to Windows updates, why didn't this problem been taken care of.  Some of the complaints I've seen in my research were two years old.

  Frustrated.  Please do stop.

  Use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first, but most likely the box you need to click is unclickable.

  Go directly to the three method

  2. for the Volume icon

  (B) to activate the Volume - icon Enable_Volume.reg< click="" to="">

  and follow the instructions of #5 à #9 down.

  Make sure that you restart the computer to complete the process.

• volume control problems

  No matter how I set the ring volume setting, it always seems either very low or almost OFF slip back.  I have the volume control app and which does nothing.  Sometimes, I know that I get a phone call because sometimes I look down and see the icon or picture on the front plate.  Does anyone else have this problem?  Someone at - he had and know how to solve?

  Thanks in advance.

  There is also a nice little app called RingGuard (not sure of the second 'g') who will ask you to confirm a change of volume if do you leave the side buttons. If you do not have to confim, it undoes the change.

• icon missing in taskba but volume control I have no XP installation disc

  I received a 2nd hand laptop but the volume control icon is missing from the notification area and have tried all of the suggestions, but understand now, I need to install the file sndvol32.exe but I donot have put XP in the drive?
  Thank you
  Janetno

  I received a 2nd hand laptop but the volume control icon is missing from the notification area and have tried all of the suggestions, but understand now, I need to install the file sndvol32.exe but I donot have put XP in the drive?
  Thank you
  Janetno

  Control Panel open folder, on the view tab Options, uncheck "Hide operating system files (recommended)" protected", click apply/OK. Now, go to Windows Explorer (not Internet Explorer) and go to the C:\Windows\System32\dllcache folder and open it. Locate the sndvol32.exe file right click, choose copy. Then go to the C:\Windows\System32 folder, and then open it. In the right pane right click on a box empty and select Paste. Now you should have your back volume icon. If not go back to control panel > sounds > make sure that there is a check mark in the box to display the sound icon in the system tray.

• The volume control is grayed and I have no sound from my PC

  I have windows XP and can't hear any sounds from my computer, but there is nothing wrong with my speakers. The problem is the volume control is gray and I can't increase the volume. Any help please

  Original title: sound problem

  Hi Abrewaba,

  You have made any changes to your computer recently?

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

• my sound keep disappearing. When I go to the volume control, it says no device installed. I have been through all the steps. How can I get my sound back?

  my sound keeps disappearing.  I go through all the help and support the steps but still no sound.  the volume control is all grey and says no audio device found.  but the Device Manager indicates that all is well.  What is the problem that I continue to have?

  Hello

  1. the troubleshooting steps are you referring?
  2. don't you make changes on the computer before this problem?

  The following article might be useful.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Volume control must be downloaded. She somehow erased and I don't have a DVD to reinstall with. Help!

  My block of entertainment in Add/Remove programs is empty. Earlier in the week Internet Explorer and MSN were both deleted. I have just the two, but the volume icon does not appear in the taskbar. Followering instructions, I tried to recover but received a message that the volume control program is not installed and do it via Add programs. I don't have a DVD to reinstall. What should I do now?

  Hello

  I suggest you do a system restore and check whether the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• IOS App Remote - Volume control issues

  OK, so I downloaded the app recently released for Apple TV IOS. Everything works as expected, except the inconsistent Volume control.

  I have two Vizio TVs in my house - E701i-A3 and models M401i-A3. The volume via IOS app works perfectly on my E701i-A3 - pressing iPhone volume buttons triggers change in volume on the soundbar attached to this set.

  No luck with my M401i-A3 not set - by pressing the volume iPhone buttons does cause changes in local ringtone volume iPhone... that tells me something is not right with audio control EAC between ATV4 and the TV set. I do not use soundbar with this set - internal speakers only.

  Both sets are running the latest firmware of Vizio and CEC/audio is enabled. No problem to control the volume or turn the sets/turn off via the remote Siri material.

  Kind of ideas here... anyone have any ideas as to what the problem may be with my Vizio M401i-A3 defined? Someone at - it got IOS volume remote control works with other models of TV?

  Volume control requires HDM - CEC to ensure compatibility. It is quite possible that only one of your TV is compatible.

• the volume control on background music

  I finished my first iMovie composed of video clips.  I have two questions:

  How to lower the volume of the background music for a few seconds only

  How to disappear the music of a song before the end of the song.

  Thank you

  Hi, grosen25,

  There are two ways to adjust the volume in the latest version of iMovie (10.1.2).

  One way is to select the audio clip, and then click on the speaker icon in the toolbar at the top of your screen.   This will reveal a scroll bar

  allows you to adjust the volume from 0 to 400%.

  Another way is to first click on the settings button in the right middle of your screen and select 'Show waveforms' in the dialog box that results.  Then select the audio clip.  You will see a horizontal volume control line that runs through the clip.  Place your cursor on the line and move it up or down to increase or decrease the volume.

• No sound, but also no container of Firefox/Plugin for Firefox in Volume Controll

  So, today, on my work computer I came without any volume in Firefox. I thought a reboot and that would fix it does not. Anyway, here's the question:

  I have my volume mixer upward, but there is no firefox/plugin for ff on adapt. For some reason, it's the same thing with chrome. IE (yuck) works with volume, but I don't think I can go on much longer without my beloved Add-ons. Any help is appreciated.

  the recent update of the plugin flash to adobe for version 11.3 caused a lot of problems. You can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.

• Satellite Pro U400-SP2804 - Microphone is not listed in the volume control

  Hello
  I can't listen to the microphone from the speaker, because does not appear micro in the Volume control

  On the start menu< control="" panel="">< audio="" devices="">< advanced="" properties="">< volume="" control="">< properties="">

  Mixing: Conexant HD Audio output

  Volume controls:
  Volume control
  Wave
  SW
  CD

  But n - t apeear option microphone or line

  My sound card is Conexant High Definition SmartAudio 221

  I was reading, and I think the problem is: it doesn't have a key in the windows registry value, someone help me, thanks

  I did: reinstall the driver, uninstall the driver and put another card sound, change the operating system, works wth 2 sound cards, portable computer, import registry values from the other laptop. but does not solve the problem.

  My problem appears with Winodws XP 2002 SP3 and Windows Vista professional

  Hello

  The port microphone or line is not because you are looking for this audio * output parameters.
  The microphone is a device of entry so it s not who listed there.

  If you go into the volume settings > options > properties you can switch to HD Audio input.
  Now you can change the volume of the microphone! :)

  Good bye