I have only 5 different formats to save my image

Similar Questions

• Action to open and save multiple files in a different format

  Photoshop CS5

  TC 3

  I did not use its actions before.

  I want to open all files in a folder from one format and save them to a different format.

  How this is done?

  Thank you

  Rob

  Assuming that you all have a format and want to just open all the files and save them under a different format, without changing anything...

  A way, using Photoshop and measures and automation, would be to define an action that was simply a file - open and file - record under in a separate file.

  To set an action, in the ACTIONS Panel, create a new set and a new action, and then just save the steps on an existing file. Once this is done, click on the stop button.

  Once this simple action was defined, allows file - Automate - lot... configured to perform the action on the totality of a folder full of files.

  You probably want to use the options [] Override Action "Open" Commands and [of] Override Action "Save as" commands .  This option allows you to do things like specify the JPEG save quality in action and will not be prompted to do it every time.

  Your batch processing dialog box may look like this:

  

  -Christmas

• In the levels layer, I have only the option of 'grey '.  When I create a fill layer, I can only see different levels of grey, not the color I chose.  How can I change this?

  In the levels layer, I have only the option of 'grey '.  When I create a fill layer, I can only see different levels of grey, not the color I chose.  How can I change this?

  Hi elizabethu,

  Greetings!

  Make sure that the image is not in gray mode.

  If it is to change it to RGB mode.

  Image-> Mode-> RGB

  And try again.

  Concerning

  Jitendra

• Action to save to the same name but different Format

  I have thousands of RGB JPG images to deal with on a particular project.  Basically, I have to make a selection of certain areas within each image in the water and then save on a black and white GIF that shows the areas of white water.

  I created an action that fills the current image of black, my selection of loads, it fills with white, saves the image and closes the file basically.

  It works OK, but not as well as I would like.  In particular, the file save game.

  If the file is named filename.jpg... I want the action to save on the n/b as filename.gif GIF.  Without question and without changing what whatsoever.  But I can't do that.  It appears registration of dialogue and puts in the argument filename "copy copy" etc. (I read this topic elsewhere) and also in question is the usual GIF of the dialog boxes.

  The "Close" to the action part also asked "if I want to save my changes, etc." ... I don't want all this to be.

  Is it possible to have it do what I want?

  Mike

  Speaking to the command prompt "save changes":

  When creating the action, Dungeon recording via the option 'No' on save changes menu. These preferences are saved in your action and it will close your jpg without you asking them to save.

  When converting a jpg to gif file, it always saves as filename.gif; Photoshop never puts a "copy" in the name of the file.  How do you save your files?

• How to: save the image in multiple formats AND edit file names every time automatically?

  Hello!

  First of all, I hope I'm not opening a discussion that has already been asked/Treaty. a lot. I couldn't find a solution to my particular problem until now in the web and I hope someone can help me.

  I work with Adobe Photoshop CC 2015.

  My problem is: I work a lot with product photos (whole/collage of several elements) and I want to speed up the process-saving in multiple formats (JPEG and PNG, sometimes TIFF as well).

  The initial situation is: I have a main PSD file (to keep things clean and centralized) with several layers, each layer containing a different element. I need to check/uncheck layer visibility often, add/remove elements of collage to generate variants of game.

  With every change that I agree (very minor steps), I have to go to SAVE AS... (Shift + ctrl + s)-> SET a format (JPEG, PNG, TIFF)-> EDIT file name (according to whole-variation [e.g. "Assembly-set01_lightbulb" / "Assembly-set01_lightbulb_cable" /...]---> save.) Fact.

  And then REPEAT the steps together, define another format drop-down list, change the name of the file again (since the file original .psd remains without additions) and so on...

  This process could his insignificant, but for me, when it comes to the variations set, consumes a lot of time, in particular, by taking changes in layers is a matter of 2 clicks.

  So what I know: There is an option to automate the in some workflows. I can create an action, where hitting a predefined key, the original PSD is saved as JPEG and PNG. But that's all. No change of name of file or the destination can be performed (AFAIK).

  Now what I want: I want to hit a predefined key, SAVE as... context-window, JPEG (...) is defined by default as defined format, I can modify the file name and/or ideally choose another folder to save to (...). Press enter-> the file is saved in JPEG format with the file name and alternative way edited. A new RECORD under... context window appears, PNG (...) is defined as the default format defined, I can still ideally to change the file name and press ENTER to find:

  -the original (unchanged) PSD file,

  -a copy of this image to JPEG with file name changed (... _xxx.jpg) [in another folder path, if I wanted to.

  -a copy of this PNG image with file name changed (... _yyy.png) [so somewhere else if I wanted]

  All this with the push of a single button(-combination) and my entry to change the names of files.

  Is it possible? I hope that my request is understandable and you could understand, what I want to achieve. The process itself is quite simple, but I have too complex concepts on how I want to maximize my workflow.

  Thanks in advance.

  Regards, Phil

  Hi Phil,

  This is something impossible in Photoshop as if now that the process you are looking for is very personalized and can be reached only in Photoshop.

  The only way that you can save a JPEG and PNG file is by creating an action, and that's what you have already tried and does not give you an option to change the file name or destination location.

  Concerning

  Sarika

• I don't have a single drive hard, but pc says I have c and d ' training is posible to bolt to merge and have only one

  I can't update windows xp drive c doesn't say not enough free space do not understand how I c and d when I have only a hard drive

  This article (KB187876) is a little dated.  The suggestion to convert to FAT32 FAT16 is!  And references to Scandisk and DriveSpace3 reveal even that the article was probably written with Win 98 in mind.

  I realize that the article header says "Last Review: February 3, 2011 - review: 4.1", but without doubt, Microsoft should have removed this article or at least Windows 95, Windows 98, and Windows Me added to the list of "products of this article applies to" rather than leave it just to "Windows Update" (which makes it sound as if it applies to current versions of Windows).

  To the original poster:

  If D: is on your hard drive (instead of referring to a CD player), TechGeek2 is probably right that there is a restore partition and should be left alone.  Here is my answer to the question of the "low disk space": canned

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a bigger internal hard drive or internal a second drive.   You can move the data to an external drive, but if it's the data that you use frequently, slower access times may annoy you.  Therefore, I do not recommend that you move your My Documents folder in its entirety on an external drive, but you can certainly do this by following the related instructions. Moving My Documents to a second internal drive would be OK.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)
  • See also:

  " How to recover disk space on Windows Server 2008 and Windows XP computers? ."

  " Forty ways to free disk space ."

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files you must move it to your external drive.  If you want to move an application to another drive (external drive or secondary internal drive), you will need to uninstall and then reinstall it specifying the other drive as the installation location.  You can not simply move the files.  Even when an application is installed on a different drive, however, it may well put some files on the system drive (i.e. the drive where Windows is located).

• Could not save JPEG images, but only as png and .bmp

  Original title: Missing File Extensions

  Hello

  I tried to save some pictures to the internet on my computer but I have only 2 options (.png and .bmp) file extension. I can't save it in jpeg format so that I can download it for an online profile. I saved the images as jpeg, but the option no longer exists. Is there anyway to fix this?

  Hi BuccoFan,

  Since you're using Internet Explorer 9, follow the steps below to:

  1. Press Ctrl + SHIFT + delete
  2. Select the temporary Internet files, Cookiesand history
  3. Click Remove

  Now try to save the image, and you should have the ability to save in jpeg.

  Let us know if that helps.

• How can I maintain export quality if I combine multiple media clips in different formats?

  For the preface, it is the first time in video.

  I use the first 13 items under Windows 7 64-bit.

  I'm doing a video with clips from friends, who are all in different formats (some iPhones, camcorders, GoPro, etc.).

  I have put them all together, and when I play back in the editor, it looks great.

  
  But when I export, it almost seems horrible, very bad.

  I'm very familiar with this, I thought naively that since it was beautiful, as I played in the elements, it would look great when I export and burn it to a DVD.

  The use of the end of the video is to have the DVD played in a movie theater. Not sure if that makes a difference.

  Any help would be really appreciated.  Unfortunately, I'm on a very short time!

  Thank you

  The f

  jeffo1b

  The answers will be in the details, and thank you for them.

  What video/graphics card your computer use?

  If you do not find your exports to the designated place save in, and then

  Go to edit Menu/preferences/general and address the issue with and without the Intel HD Graphics 2000 and superior preference disabled.

  The following points in this preference ATR first troubleshooting items: EP 13 / 13.1: Hardware Acceleration preference

  The above has worked for many. Let's see if it works for you. But why are you burning to Image of ISO to DVD-VIDEO. Burning to disc is a failure to the end?

  The status of this preference should have more impact export of functions apart from the choice of iso burn.

  Although the disc format Blu - ray playback on Blu - ray player Blu - ray disc should, I don't think we can say that all the Blu - ray format AVCHD on DVD support readers. Another point to check with the people in the movie theater.

  If you want to return to the DVD VIDEO widescreen DVD disc for target for the best possible final product details, I would be happy to occasionally help with detailed information.

  Please consider.

  RTA

• Different formats in the Excel column to the 1 format for loading into the table

  I have a situation. I have to do a SQL load into a temporary table to an Excel file but I noticed that the column that I am more interested about 4 different formats. My desired format must always be 7 characters and must only have numbers in them. This means, without hyphens or special characters or alphabets.
  
  I discovered that the column in Excel has about 4 or 5 different formats:
  
  Here's what they are supposed to be transformed into:
  42 = 0000042
  000-0257 = 0000257
  0090647 = 0090647 (format Corect)
  709782 = 0709782
  135566F1 = 0135566
  
  The latter case does not seem to have 2 or 3 lines here comes this Alphabet but then anything after what must be discarded. I could probably just delete the file manually (F1).
  
  Any ideas? Thanks in advance.

  Hello

  Raj404261 wrote:
  Sorry, not on 10g here.

  What a pity. It is so much easier using regular expressions!

  To return a copy of bad_txt with everything except the deleted numbers, and 0 concatenated to make the result 7 characters:

  ,     LPAD ( TRANSLATE ( bad_txt
                         , '0123456789' || TRANSLATE ( bad_txt
                                           , 'x0123456789'
                                     , 'x'
                                     )
                  , '0123456789'
                  )
            , 7
            , '0'
            )
  

  TRANSLATE inner removes all the numbers from bad_txt. What remains is a string that contains all the charcaters who have eliminated (as appropriate).
  TRANSLATE them externally only removes the characters of bad_txt, by translating the 10 digits to themselves and nothing else to NULL.
  LPAD provides enough information to make a 7 character string of 0.

• Too many different formats

  I use Excel 2011 14.6.3 and have a great page that has 17 columns and 3867 lines.  It includes English, Japanese and Thai police.

  I get the message "too different formats", and it corrupts the page.  What can I do to fix this?

  Thank you for your help.

  Considering that it is a third-party rather than an Apple product application, have you considered asking your question in the Microsoft forums?

• My 2 TB TC is full and will not back up. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

  My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

  I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.

  Any suggestions on getting my TC back up?

  One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.

  A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.

  Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.

• My music files have changed in WMA format in Windows Media Player, and now my MP3 player won't play them.

  My music files have changed in wma format in windows media player, and now my mp3 player won't play them.  can anyone help please.

  original title: Media Player

  Download and install WMA to MP3 Converter, then install it, you can get it here... http://www.WMA-MP3.org/

  Then select all the WMA files you want to convert, and then convert them to the MP3 Format.
  The reason why they are WMA is because when you ripped the files on the disc to your pc, by default, Windows Media Player is configured to save in the Windows Media Audio (WMA) Format.
  This default can be changed by opening Media Player and click on Tools > Options
  Then select the Rip music tab
  Format: select MP3 from the drop-down list.
  Click apply and OK.
  Now the next time you rip a CD on your drive hard it will be automatically saved as an MP3 file.

• I have only a hotmailadress. you want to send e-mail to an office. Please help me what I HAV to do then?

  I have only a hotmailadress. IWant to send e-mail to an office.

  Please can tell me how I can get anotter mailadress?

  If you do not use a hotmail address, then you must sign up with a service provider (your ISP will probably be fine) get an another e-mail address that is provided by the ISP.  To do this, you probably have to call your ISP to register and get the instructions of installation appropriate for your email account (and possibly use their program access online if they offer or use Windows Mail or Windows Live Mail to send and receive e-mails, then again).  Unless you want a yahoo or grmail or other type of account such as hotmail or msn, then the new e-mail service can cost you an extra monthly cost (although most ISP plans come with the e-mail as part of their plan - free mine comes with the ability to make up to 5 different email accounts using their identification).  What plan you choose is up to you.  I don't know why you need a new address in the first place - but it's up to you (there is nothing wrong with hotmail, but I assume that because it is free, it doesn't "look like" also good one from a different and private source).

  The result is that you need to contact another e-mail provider (or you can even get another hotmail e-mail address if you want to) and register, obtain the appropriate settings, wait however long it takes to create your account (it shouldn't be long) and then you have a new e-mail address to use.  Most e-mail programs (you don't say what you use) have the ability to merge or show several different accounts at the same time, so that shouldn't be a problem.

  Here is a search engine Bing on "e-mail service providers" which should give you a start if you do not use one from your ISP (or they do not offer this service):http://www.bing.com/search?q=e-mail%20account%20providers&mkt=en-us&FORM=TOOLBR&DI=6244&CE=14.0&CM=SearchWeb.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 64 GB MicroVault USM64GM will only appear and format of 32 GB

  I have a the GB MicroVault USB 2.0 flash drive 64 - 14N18EGEN3 S/N USM64GM which will not format as anything other than a 32 GB flash drive.

  I use Windows 7 and try to format the drive by clicking on workstation, do a right click on the flash player icon, selecting formed, but it only recognizes the drive as a drive to 32 GB.

  Has anyone else had a similar problem?

  It's as if the outside of the car said 64 GB, but the courage inside is only 32 GB.

  Hi AZLorne,

  Welcome to the community of Sony!

  This could be a problem with a greater storage capacity of the USB key. There are other users of USB key 64 GB with the same question.

  Have you tried to format the flash drive to NTFS or FAT32? Please try to FAT32.

  If still the same, please format the laptop through command prompt / DOS command.

  1. Connect the USB to your PC.
  2. Click Start > run > type cmd and click OK. ...
  3. format/q/x G: and press enter. (G: is the flash player)
  4. The q parameter means quick format.

  You can also follow suggestions here

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• I need to transfer the Creative Suite 6 from an old computer to a new one. I have a disc. Do I just disable the program on the old computer and install it on the new computer, then turn on? Adobe will recognize that I have only 1 copy in use?

  I need to transfer the Creative Suite 6 from an old computer to a new one. I have a disc. Just disable the program on the old computer and install on the new and then save Will Adobe recognizes that I have only used a copy?  I need to also install the program on a laptop.

  You can use the serial number twice, Learn how to enable or disable Adobe applications

  Concerning

  Stéphane