I have phone 6 and not recognized by windows 8 pc

Similar Questions

• After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

  After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

  You can not

• Cyon LG KU4000 not recognized by Windows, LG Mobile Support Tool or Mobile Sync III, which came on the phone

  I had twice the phone somehow to be recognized by Windows, in which case LG also recognizes, but I don't know how it happened.  When I just plug in the USB cable it is not recognized.  Is it possible to download photos, etc.

  Grace Han
  E-mail address is removed from the privacy *.

  BTW, I'm in Pyong Taek Republic of Korea right now as my husband is stationed here. LG thinks I'm in America, probably because I have a computer Dell laptop to America and English.  When I put the software to the Republic of Korea (LG will recognize a 4000 KU which helps, but is not the whole picture. What can I do?

  This phone works in Korea, that's why I use it. My American phone does not work here.

  Hey,.

  Contact LG support for assistance on this issue.

• Pioneer BLU - RAY and DVD discs not recognized by Windows 7

  The discs were fine until I installed Windows 7 Home Premium 64-bit. Before my hard drive crashed, I was using Windows 7 Pro 64 bit. The computer was built by a local store, so I don't know if they have done something special to get discs running, but readers are reported as compatible with Win 7.

  Readers are:

  PIONEER BDR - 205 Blu - ray

  DVD PIONEER DVR - 218L

  My motherboard is ASUS P6TD Deluxe, BIOS 0106

  I am very handicapped and rely heavily on my computer to work. I can't load my well-being critical software until I get these discs work, then I'll be very grateful for any help.

  Thank you

  Jeff

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: Run the troubleshooter of material and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

  Alternatively, you can install the drivers from here:

  BDR-205 Blu - ray Pioneer driver:

  http://www.PioneerElectronics.com/Pusa/Professional/computer-drives/BDR-205

  Method 3: Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  See also: automatically get recommended drivers and updates for your hardware.

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I have a problem with the passoword not recognized on Windows 7.

  Original title: password not recognized by Windows 7

  Hello

  My father has a Windows 7 PC. He wants access to his PC with a password. After you set the password for the account in the configuration, it is not possible to use the password login; the answer is that the password is not correct. When I then log on to the computer with a different account, and try to reset my fathers a non administrator account password, I ask myself to use my user name of fathers and provide the password for my account of fathers (he is administrator). When I enter the password, it is accepted as correct. How can I set a password for my fathers account and use it to open a session? Are the different passwords for 1 account?
  Please note that it uses a personal account with administrator rights. The computer has been scanned for viruses with Norton 360 several times.

  Kind regards

  Steafn

  This type of problem is caused by one of the following reasons:

  • CapsLock is on
  • NumLock is on
  • You have more than one keyboard language installed. When the session opened, a different card is used subsequently. Use a password that is insensitive to the evolution of your cards. Start by '123456' confidence.

• Windows 7 - when I have my laptop and not really doing anything on it next to the arrow of the hourglass cursor appears.

  Original title: a ridiculous?

  When I have my laptop and not really do any what on it next to the arrow of the hourglass cursor will be displayed. Is this something normal and computer said is just doing something in the background? I'm still learning on the computer. Can you also tell me if Microsoft supports all follow along classes for suck lol. You know just something that would help me to learn more than just check email and surf the web. ythank to help with this? To clerify my? a little more I use Win 7 and Mcafee total protection in what concerns the hourglass, it appears for a few seconds then works.

  Learning - in particular, there are many explanations of key aspects of Windows 7 to Windows 7-help & how-to , there are video demos online which are very informative, as you can see people from operating common components such as Windows Explorer.  But please do not ignore the help Windows on your PC because it also has useful info - search for the start-up, for example, and it will give you a brief explanation of the things that you can then decide to go further by using the link above online.

  Led busy PC - actually it is normally a circle occupied rather than the hourglass XP but I guess that's what you mean.  It is difficult to comment without knowing how long it is for & how often, but the short answer is - Yes, the PC can get other background tasks when you leave it sit idling the day away.

• Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Description of the problem:

  Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Steps to recreate:

  UEFI:

  1. Start the PC in diagnosis system UEFI (F2 at the STATION)
  2. Pane controls
  3. Optical drive
  4. Sequential control
  5. Error: Optical drive not installed.

  8.1 Windows (x 64):

  1. Run Device Manager
  2. Error: No CD/DVD Drives section.
  3. Search for new hardware changes nothing.

  Relevant system specs:

  Mobile: HP Pavilion 15-n023sa (construction of vanilla)

  Optical drive: HP DVDRAM gu70n

  Steps already taken to solve:

  • Replaced the DVD drive with one of the similar specs of HP Pavilion. The replaced gn70n perfectly in the other machine. No change on problem laptop. Conclusion: DVD player works, and there is no problems with Windows 8.1 (x 64).
  • Removed DVD player. Restarted the computer. Sign in to Windows. Stop. Replace the DVD drive. Start the laptop. This is trying to solve defects of material with the PnP devices; more help to solve any problems of intermittent loose connection. Conclusion: No change.
  • Ran, troubleshooting of hardware and devices, via the control panel. Problem found: material changes may not have been detected. Explore more options just takes you through http://social.answers.microsoft.com/search/en-us/?query=hardware+device, that it is a 404 error page. Conclusion: Help and Support Windows is sorely lacking. They show no more information than just that something was detected as incorrect.
  • Ran the Microsoft FixIt troubleshooting of optical disc and auto repairman. (http://download.microsoft.com/download/F/5/8/F586FB7C-78E0-40EB-AF41-4C925F803CAF/CDDVDWin8.meta.dia... The convenience store has reported that the device was not found. He recommended to remove all power cables, power off, and various other things which have no relevance for computer laptop troubleshooting of switching equipment. He said: If the problem persists, contact the manufacturer. Conclusion: Windows troubleshooting can not solve the problem.
  • Run Windows Update to ensure that all updates and definitions have been installed. Conclusion: Windows is perfectly up to date.
  • Run a complete Rootkit and malware using Sbybot S & D 2.3 heuristic analysis. as a signature database scan using Windows Defender. Conclusion: Laptop is clean of rootkits and malware, to the best of my knowledge.

  Notes:

  The DVD player is NOT appear in Device Manager, OR in this PC.

  The DVD drive is NOT detected by diagnostics system UEFI.

  There is reference to the DVD in BIOS drive NUMBER , other than as an option of Setup, which is generic.

  The DVD player itself, works and has been verified on a different machine.

  The only possible conclusion is that the optical drive port mini-SATA on the motherboard is dead.

• Yoga Pro 2 - display not recognized in windows (hardware or driver problem?)

  Out of warranty by a month!

  Yoga Pro 2-256 gb, installed a new wireless card a month ago. Windows 8.1

  The touchscreen still work while the screen is black.

  System restarted after the mode 'sleep', in my opinion.

  The Lenovo logo is displayed, seems to load Windows, but when windows loads (I don't see it so it is a hypothesis of load) drafts of the screen and the black light is on.

  Can I connect an external monintor that connects after the return from sleep mode (odd). Who then off the backlight.

  When the external monitor, the internal screen is not yet recognized by windows.

  When I boot in safe mode, the internal display works fine with of course limited capabilities.

  I rebooted on the support site display drivers.

  Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.

  Someone at - he of the clues as to what my happen? Hardware, driver etc?

  Can what information I provide?

  It is a pretty weird problem with contradictory observations.

  (1) screen working in Mode safe but not regular boot. (So not the hardware problem)

  (2) display on an external monitor in normal mode. (So, no drivers issue)

  Have you installed the wireless card yourself? You unplug the cable from the screen during the installation of the card?

  Could you re - open and check that all connections are good?

  The Wi - Fi card works well?

  I also recommend a complete reset of the laptop to eliminate the possibility that it is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure you make a backup on an external drive for your personal files.

• Pavilion 550-122nd: Laserjet 1018 is not recognized in Windows 10

  LaserJet 1018 is not recognized in Windows 10 of 155-122nd Panilion.

  The "result of software and driver for laserjet 1018' has not failed (new driver)

  USB ports active aere

  Do I need a new driver for Windows 10?

  Is a new availabe driver for Windows 10?

  Thank you.

  Hello and welcome to the community of HP @Rikkie1,

  I understand that you're having trouble installing the drivers for your HP LaserJet 1018 on your computer Windows 10. I will do my best to help.

  Only the integrated Windows Print Driver is compatible with the HP LaserJet 1018 on Windows 10. Below, I have posted a link to a document that has some instructions on how to install and use the integrated Windows print driver. Please try all the steps in order and get back to me with the results.

  HP print driver printer - install and use the built-in Windows

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• My new Canon 70 d is not recognized by Windows 10 anniversary.

  Anniversary of 10 Windows running under Parallels 12 on a new MacBook Pro.

  Plug my 6 d and that it appears in the devices.

  Plug my 7 d and it does NOT appear in the devices.

  I have two other (not Canon) cameras that work with Windows.

  Using the same USB cable for two Canon cameras. Even tried another cable.

  I have two new cameras: 6 d and 70 d.

  The 6 d is modified and cooled by DS Central.

  The 70 d is original.

  MacBook Pro with 16 GB of memory running macOS Sierra.

  Using the same cable for two cameras, EOS Utility 3 that was installed for the 6 d running.

  The 6 d is recognized by the works and EOS Utility 3.

  The 70 d is not many EOS Utility 3 or EOS Utility 2.

  And curiously, the 70 d is also not recognized by Windows 10 (update birthday, running under Parallels on the MacBook Pro 12).

• Your CD or DVD drive is missing or is not recognized by Windows or other programs

  I tried to apply the patch, MicrosoftFixit.dvd.Run.exe. He could not say "NET Framework initialization error. Unable to find a version of the runtime to run this application. If this is related to the framework version number .net (such as published in some issues) then Microsft back compatible fix to the problem. It should give a step-by-step procedure to solve these 2 problems. Microsft say DVD problem was know question and it was fixed in XP SP2. I installed Windows XP with SP2 and now updated to update to SP3. But the problem persists. Any help from anyone?

  shanglur,

  If you have installed all Windows updates, there's no upper/lower filters to delete, you can try...

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  But it's almost the same thing as above. I suspect that your cd/dvd drive may have failed.

  Rick

• DVD not recognized by Windows

  DVD format

  I was not concerned about the codecs and such because I own a DVD player and do not need to play DVDs on my computer.  But now I have some records of EA games in DVD format and XP don't recognize I have a disc in the drive.  The Microsoft Download for codecs is useless.  How to fix XP to recognize ACCESS AND a computer on DVD drive?

  Hi MelFletcher,

  ·         You see the DVD drive in Windows Explorer?

  ·         Have you tried to play other DVDs?

  ·         You can fine CD?

  Follow this link and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• .mov file extension is not recognized by Windows Media Player

  original title; Media Player

  When I try and play a movie on my camera which is a Canon I get a message that says this file has an extesión (mov) and is not recognized by windows media player, what should I do to correct this

  You (possibly or) missing a codec.

  I suggest you only install this codec pack.

  http://www.free-codecs.com/download/Vista_Codec_Package.htm

  Main Page: click, download Vista Codec Package

  Second Page:

  Download Vista Codec Package 6.3 first a: 32 bit .zip File

  Download Vista Codec Package 6.3 second one: 32-bit .exe file

  Download Vista Codec Package 6.3 third one: 64 bit .zip File

  Download Vista Codec Package 6.3 fourth one: 64-bit .exe file

  This is the free safe and the best package on the web.

  He'll play 99% of files, so you will not need to download or use other programs.

  You can check here to see what's on your system.

  To check: Open Media Player, click Help in the menu, on the Windows Media Player, Technical Support information.

  Click here to see if you have 32 or 64 bit:

  Control the look of Control Panel, system, under System Type:

• DROID 2 not recognized by Windows media player to synchronize.

  Use Windows 7 and my DROID 2 shot used to synchronize with windows media player... run troubleshoot for the droid 2 and it says it resolved the problem, but the droid 2 is not recognized by windows media player to synchronize. It worked before, so I put still back the system and still no luck

  Hello Jack Cromwell.

  1. is your 2 Driod recognized in Windows Explorer and the Device Manager?

  2. did you of recent changes to the computer?

  I suggest you check if the Driod 2 is detected in Device Manager.

  Also try reinstalling the drivers for the device. Follow the steps to reinstall the drivers for the device:

  a. Click Start. In the start search box type "devmgmt.msc", and then press ENTER.

  b. Locate the (Driod 2) device in Device Manager.

  c. click on the "Driver" tab, click "Uninstall".

  Note: Make sure you have source to reinstall the drivers before you uninstall the drivers.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• CD/DVD drive not recognized by Windows Vista

  I installed a suite of burningb of CD and DVD on my Toshiba (under Vista Home Premium). My CD/DVD drive appeared more in the computer and was no longer functional. I deleted the program I installed and apparently caused the problem, but it did not help. I have read through the help of Microsoft (929461, 314060) documents and used the Fix - It utility. Also unsuccessful. I discovered the response of Martin, the technical support engineer made on May 5, 2009. I followed his instructions with great success. However, my question now is this: I have still some remains of the problem left over. I get an error message at startup saying, 'InstaBurn UDF driver is not installed correctly. Run the InstaBurn installation program. ' InstaBurn is part of the suite of the copy (hotpics by Nova Development Corp.).  I also have an error message of my reader DVD Toshiba saying that the DVD player does not work - although it is. I played a DVD as a test on it after that I followed the instructions above. How can I remove these error messages annoying that aren't accurate?  Would appreciate any information about this minor - but annoying problem.

  Hello

  Do a Restore Point then you can go back to where you are if necessary although you should not have to:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================================

  Go to Toshiba and download and drivers or programs that affect the CD/DVD drive - Chipset
  and BIOS updates can also play a role.

  For any download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Toshiba downloads - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Then reinstall the programs that you use for this drive.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.