I have problem to start my system... I have model VPCEB36FG of vaio

Similar Questions

• I have a problem with my laptop system restore and I can't open it

  Original title: Please help me
  -----

  Dear friends
  I have a problem of my laptop whit system restore and I can't open it.
  A few days ago, my windows xp reboot both and colud not restart my computer. I had to use my back for recovery system because the other option as in mode without failure or last good configuration didn't ' work corectly.
  This event occure to me several times and I am very confusede on this subject. . I have latest version of avast anti virus in my laptop. Please guide me and give me your solution for my problem towing?
   
  Thank you for your kidness

  What happens and what do you see when you try to open the system restore?

  When you say things "did not work", we need to know which "did not work" means exactly... I get an error message, nothing seems to happen, the system crashes, etc.

  Try answering the following questions, the better you can:

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Wiped a computer due to problems with the operating system, but do not have any media to reinstall. Help.

  No operating system

  Hello

  I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.

  Would it not possible to obtain another copy of the operating system for that computer?

  All the best

  Dean

  Hello

  These are forums for Vista, so vista information is provided

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• HP stream 11-d010wm: I have a hard time to start the system it asks me the password for administrator password or power

  I have a hard time to start the system he asks me the password for administrator or power password which I don't have
  
  This is the code that I get when I entered the wrong password 3 times-(56448130) I would be grateful help
  
  Thank you!

  @dj_infiel95

  Enter 49520116

  Kind regards

  DP - K

• Error: alert! Previous attempts to start this system have failed at checkpoint [size].

  I tried upgrading the video card in my dell dimension, but doing so caused this error, error: alert! Previous attempts to start this system have failed at checkpoint [size]. I removed the new video card and put the old one back, but the error still occurs. Any help on how to fix this error would be much appreciated.

  Not necessarily...

  Power off, unplug... Remove the motherboard battery... Remove all memory modules except to location 1. Reinstall the battery and see if it boots now.

  Then, repeat the process and share all the modules on the slot 1, one at a time until you ID a bad module. If they all work in location 1, add modules one at a time for other locations until all are reinstalled and it boots or you ID a bad location.

• I still have the problem to start appeal video Messenger with window 8... ? do you have an answer for me?

  Separated from this thread.

  I still have the problem to start appeal video Messenger with window 8... ? do you have an answer for me?

  Hello

  Thanks for posting your query on the same issue. I will certainly help you in this matter.

  However, I would like to know;

  1. What is the brand and model of your computer?
  2. As you mention "you still have the problem" can I know when this problem occurred in the first place?
  3. Which messenger you are talking about?
  4. What happens when you try so that video calling?

  If you re referring Skype Messenger, please follow the steps.

  Check the permission, follow the steps:

  1. Press Windows + C on the keyboard.
  2. Click settings.
  3. Go to permissions.
  4. Webcam and microphone and turn it on.

  

  See also:

  Chat, call and video call with Skype

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Hi Matthew,

  If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

  1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
  2. If this does not help, reset the Bridge preferences and then try it.

  Steps: -.

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  Assani

• Satellite L450D - 13 X does not start the system - PXE - E61: Media test failure

  Hello

  I turned on my laptop after only a day and it will not load
  As a first step, he said start the system restart or start normally,

  I chose startup repair, but it does not complete the repair.
  It now comes with a repetitive screen with PXE - E63: media test failure, check cable of
  PXE - MOF: exit ROM PXE

  I tried Googling the answer and go into the BIOS menu and to the section boot but I can't seem to change anything at work.

  There are, and exclamation mark in front of what I think is my hard drive on the screen

  ! HDD1/SSD1 TOSHIBA MK2555GSX-(S2)
  CD/DVD HL - DT - ST DVDRAM GT20N-(S4)
  FLOPPY DRIVE
  LAN

  I have nothing in the disk drive and I don't have a recovery disk.

  Any help would be appreciated

  Thanx

  Leon

  Hello

  For me, it looks like a malfunction of the HARD drive and so the BIOS can not find a bootable device and goes to the last possible bootable option which is LAN.

  The exclamation mark in front of the HARD drive indicates that there is a problem with the HARD drive so I think you need to replace the HARD drive and you need to reinstall the system.

  PS: What laptop do you have exactly?

• Satellite C660-223 - system caution: "" problem with cooling detected system "".

  When I carry my Satellite C660-223 somewhere for example wear at home to College in a protective case in my backpack, I sometimes get a window warning flashing upward every 20 seconds or so said system + "warning: a problem with the cooling system has been detected." Please turn the computer off immediately and return it for service. +

  This only happens when I transported somewhere and as a first step, that these warnings system flashed only sometimes upwards after I hauled somewhere, but in the last two years, he started to get pretty much whenever I took the laptop somehwere. When the system warnings blink until the computer doesn't feel a little warmer than normal. no danger of overheating, immediately.

  I didn't fix it because the problem seems to resolve itself the next time that I carried the computer somewhere. It's a very strange problem where the short-term solution was the same as the cause: as in I would take the laptop somewhere, the warning system flash upwards and I learned that take "for a walk" would fix somehow everything which was the 'problem '. I solved the problem in this way too often so he could be a coincidence.

  So for a while it wasn't really a problem because I just didn't take the laptop anywhere. But the warning system has recently start flashing to the top if I wear just the laptop on the floor, and the warning system does not disappear with my method incredibly non-tech-savvy to "go for a walk", which I am sure many here would give something to laugh :).

  The obvious answer is that I need to get the service pronto thing, but I'm in the middle of final exams and the situation of tech in my house means I can't leave the laptop away for service for who knows how long when I really need to study.

  Responses, I'm hoping to get are ideas as to what actually caused this problem and short-term solutions that are a little better informed that my approach "going for a walk".

  I think THAT what is, is that the movement to carry your laptop around in a backpack something within the done cooling system moving out of place causing the evil TI work. I say this because, while writing this thread I was turn the laptop over and over again to get a look at the stickers on the back and the practice that seems to have "solved" the problem of warning system because this window flashes up while he was only a few minutes ago.

  It seems so that all component moved his place before been moved back again by the movement to turn the laptop over and over. And I was not even take him for a walk!

  Any help? Thanks in advance.

  Hello

  This notification may appear for different reasons.
  The alert might appear due to
  (1) cooling system malfunction
  (2) blocked cooling vents or fans
  (3) software question (VAP - added value package or BIOS)

  Malfunction of the cooling system, you should contact the service agents at the difficulty.

  In case of a blocked vent and fans it s enough to clean the parts using a jet of compressed air.
  This allows to get rid of dust inside the cooling module.

  If the vents are not blocked and you still see this message, check the application of the service station for updates on your computer. If any are found, download and install.
  You can try to uninstall or update the Toshiba value added Package. This package contains a few essential tools and utilities that control the cooling system too.
  Also check BIOS update.

  But if you continue to receive this error, your laptop may require repair

• Satellite A660 - message: WARNING: a problem with the cooling system

  My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

  So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

  He also mentioned that I could use the machine with a cooling pad until then if I wish.

  Any feed back?

  > Yes the fan had stopped working and touchpad area was hot.

  In this case, there is really a hardware problem.
  But I m wondering why he should replace the HARD drive and the motherboard
  Perhaps only the cooling module began at malfunction of course this is just a speculation
  If the technician has checked the material, then they need to know what parts are not OK.
  So don t think you have no choice.

  But the guarantee is valid for all is free

• Error message "A problem with the cooling system" on Satellite A660

  Hi all

  Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

  The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

  The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

  Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

  I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

  Thank you

  In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

  I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
  I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• Problems to start Windows XP. I get "STOP: c0000218 {a resgistry file failure}}" error message.

  Original title: I'm having a problem when I start my xp.__It blue screen Watch window and wrote as details below:

  I'm having a problem when I start my Windows xp.
  It shows the blue screen and was written like this:

  {STOP: c0000218 {a resgistry file failure}}
  The registry cannot load the hive (file):
  \systemRoot\ststem32\config\software
  or its log or alternation.
  It is damaged, missing, or not accessible in writing.
  Beginning physical memory dump
  total physical memory dump.
  For more assistance, contact your system administrator or technical support group.

  Do you currently or have you ever had products Norton or Symantec installed and if so, which version?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• When I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work.

  I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.

  Discussions were merged.

  Deleted duplicate.

  Original title: failure of the Dll

  The error seems to be a common problem with Dell laptops:

  http://en.community.Dell.com/search/#q=Lanucher%20dll&sort=rating%20desc&defaultAskForumId=0&pi1680537405=1

  It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.

  Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:

  http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers