I have problems to make my div to the right toward the right on my page of shelters.

Similar Questions

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• I was using WIA in Photoshop Elements because of problems with my scanner HP ScanJet sudden 4200C window. With the help of my scanner HP through WIA worked very well. Now I have problems analysis with either WIA or the window of the HP scanner.

  When I finally tried to solve the initial problem scanner HP in resettlement of the disk to scan, I kept getting the message that it was not compatible with Windows 95 or 98. But I have Windows XP.  So I finally downloaded and installed scanner drivers, software and upgrades on HP website. Well, the works of scanner, but now there are new problems.  1 - once the hp scanner window is displayed by clicking on import through Scanner HP, most of the menu at the top of the window items is not available. For example, I go to settings and all that is now available is to scan in color. There are 5 other options I should be able to click on, for example, resolution.  And I need that.  I thought, no problem, I'll just use WIA as before, as well as the WIA window came much faster than the HP one.  Problem 2 - in elements, I can go to WIA, but it says "NO compatible WIA devices have been detected."  That's happened?  I tried to go into Panel, scanners and cameras, add a device... but he could not find the scanner and of course, he cannot read the HP disc because of the inconsistent message of windows 95-98 (on my Windows XP computer!).  Can - I just uninstall my scanner and if I make the WIA will be able to find it after that?  I do not understand how I could use WIA and now I can't.  I know it has something to do with that I downloaded and installed at HP, but what?  I hope someone can help.  I have a huge project that I'm trying.

  Hello Hotrodgrandma,

  Thank you for your message.  It seems that when you have downloaded and installed the driver from the HP website, you cannot have downloaded and installed the updates as well.  Click HERE to open the HP website and download the appropriate files.  Below, I will give an overview of what you need to download and install in order.
  1 ScanJet 4200C/Cse/Cxi PrecisionScan LT software/driver
  2 HP PrecisionScan LT for ScanJet 4200 c Scanner update. This update allows the parser to work under Windows XP.
  3. all three updates, in no particular order.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with IE8 placing div to the right place. Other browsers work fine.

  My layout works in all browsers (Firefox, Safari, Chrome, Opera and IE6 and 7), but not in IE8 or 9beta.

  The problem is a containing div text does not display below a "lightbox" Gallery In IE8, the div text jumps and appears behind the gallery.

  I tried to use definitions negative pixel in the css (margin, margin-top, down) and other simple stuff without result. This site is still developing but I have a few examples of online pages. Here is a link to one. http://www.redhousepottery.com/chimerasite/Hanks.html

  I feel that a css hack is all that I have to solve this problem. I don't have enough practice at that time. Any help is appreciated!

  Add the above to your meta code to emulate 7.0 and probably solve the problem, at least until you can find a fix in IE8.
  Best,
  DR

• I use word for mac and have problems with Hebrew and orientation of the text from right to left

  Hello

  I use Word for Mac on my MacBook (version 10.11). I have problems setting the orientation of the text of the Hebrew version.

  Where can I find the icon for the orientation of the text? (not like the alignment)

  It doesn't look like Word for Mac has the RTL support. See the first response to this which Hebrew fonts program works well on a mac - to write Hebrew texts or insert the Hebrew into English documents? post for some alternatives.

• I have problems with my printer, most of the time I get a message saying to start my spooler and when I try it says I have an error any help would be appreciated

  as said I have problems with the printer spooler with the fact that it's the second printer the same problem, it seems to be a Windows related problem

  Hello Martin,

  Try this fix it site: http://support.microsoft.com/mats/printing_problems/ .

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• have two different computers and have problems recoving from hybernation. Locking the system

  Original title: recovery of hybernation

  I have two different computers MS 7 and have all two issues recoving from hybernation. They lock just straight up (do not accept an entry mouse or keyboard) and requir3e hard re boot. Goes 8 to 10 times a week.

  Hello

  (1) did you of recent changes to the computer before the show?

  (2) is the specific question at the opening of specific applications or programs?

  (3) you get an error message?

  You can perform the following methods and check if it helps.

  Method 1: Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  2 the resolution of the problems of method Performance

  Run the troubleshooter of performance, then check if it helps.

  Check out the link: http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter

  Method3:How to troubleshoot performance problems with sleep, hibernation and resume:

  http://support.Microsoft.com/kb/950686

  Note: The article remains valid for Windows 7 also if it is for Vista.

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 4: update video drivers card

  Check if the video card drivers are up to date. Install the latest video card drivers for Windows 7 on the manufacturer's Web site.

  Tips for solving common driver problems:

   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  It will be useful.

• Problem with "make several images at the same time"

  When I try to activate "Made simultaneous multiple images" in Edition > Preferences > memory and multitasking, I have problems when I go.  I click on "View" and for about one second long video the video shows very well, but suddenly changes to the default screen that indicates when a file is missing.  Any ideas why this could be?

  2 GB of Ram

  It is not enough RAM to use effectively simultaneous multiple images rendering.

  The bare minimum is 1 GB per background process, and that doesn't count all the RAM that use other things such as your operating system and other applications.

  So, I think the simple answer is that you should not try to use made simultaneous multiple images on this computer, unless you can put more RAM in it.

• I have problem with my Apple Watch, during the step count of the market does not appear on the watch?

  I have a problem with my Apple Watch, when I use the watch on my treadmill, keep the phone, the number of step does not appear, the whole market is a waste if it shows only not on Apple Watch, how to solve this problem?

  Hi Shabbir

  Apple Watch has two integrated health and fitness apps: enforcement activity and the application of the workout. For best results, make sure your arms naturally swings while walking on the treadmill, as Apple Watch uses movement of arm (measured by the built-in accelerometer) to track and evaluate movement for indoor activities. If you use the application of the training session, your watch will also measure your heart rate continuously for training in order to estimate the calories burned.

  Check that you have configured the application of the activity:

  -Press the rings activity on your watch dial or open the application for the activity (if you have not set it upwards, you will be prompted to answer a few questions).

  Also, make sure that the fitness of tracking is enabled:

  -On your iPhone, in the application of Eve, go to: Watch My > privacy > Motion & Fitness > fitness monitoring.

  You can improve the accuracy of the estimates related to activity in calibrating Apple Watch (take your iPhone with you on walks outdoors or tracks, connected to your Apple Watch and with location enabled Services - see the detailed instructions in the article to support below).

  More information:

  http://www.Apple.com/watch/health-and-fitness/

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Problem to make a call on the Tablet mode.

  Hi, I have the latest installed Skype (6.14.0.665) from the game store.
  On a Lenovo tablet with Android 4.4.2
  
  When the Tablet is in landscape mode, the call button doesn't seem to work.
  The screen is not damaged - it does not work right up or upside (the soft turns).
  I can very well use the call in portrait mode button.
  Also, the video call button works in landscape mode!
  I've attached screenshots to show the button of the issue.

  Can you help me?
  Thank you.

  
  

  You beat me by 6 minutes borisk3...
  
  Can confirm that this problem has corrected the non-operational call key.
  
  Mike.

• I have problems with my bluetooth connection. The computer will not receive files. (But can send)

  It's my computer specs:

  Acer Aspire 4741G
  Genuine Windows 7 with SP1 (full update)
  Trend Micro Internet Security

  Problems:

  Problem:
  (1) on the (Fn + F3) bluetooth connection
  (2) Bluetooth icon at the bottom right.
  (3) right click on bluetooth icon.
  (4) number, 'send a file' or 'receive a file' options.

  Problem 2:
  (1) successfully connected to a Blackberry curve 8900
  (2) I can send files to the handphone.
  (3) when the handphone sends the files to the computer: this message appears:
  (a) connecting...
  (b) sending file...
  (c) and then it stucks at 0%.
  (4) I have the feeling that the blackberry is trying to send the file, detects the computer, but the computer is waiting for a user input to receive.
  (5) maybe the problem is: nothing on the screen shows up to tell me to accept the file.

  Problem 3:
  1) click on the start menu
  (2) search for bluetooth. (Icon)
  3) click the icon.
  (4) nothing happens. O_O

  Can anyone help?

  Thank you

  Kind regards

  Yong Tze Shoong

  Hello

  I suggest you follow the method and check if it helps.

  Disable your anti-virus and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, try posting your question in forum Blackberry

  http://supportforums.BlackBerry.com/T5/community-home/CT-p/comm_home

• I have problems to connect to ePrintCenter and the password recovery link does not work for me.

  I have a PhotoSmart 5510e which was working fine until recently these app printing stop work and display of messages that I need to go to for custom ePrinterCenter it. Has tried to open a session in the ePrintCenter but it keep telling me the password is not valid. And when you use the password to get the link, it keeps telling me to enter the email address associated to the my account when I click OK. I already have then enter the email address what do I do? Really need to connect if I use the App founction on my printer. My computer is running Win7 64-bit.

  Hello jc111,

  I would like to apologize for the problem you are experiencing.  The eprintcenter.com site and the site snapfish.com are connected.  It is possible that you had a printer in the past that you signed up for an account with snapfish, while you were recording with us and you didn't.  I would try going to snapfish.com and using the forgotten password under their log link to see if who you alow reset you the password.  Once the password is reset, log information Web site snapfish.com will be information to use to connect to eprintcenter.com.  If you need anything else please do not hesitate to answer.

• Have problems when you try to connect the app

  Anyone have struggled to try to log in photoshop on iphone fix 6

  Andzoe and EJ2310 .

  We just released Fix 1.2.1 to treat the following accidents:

  • 9.3 only iOS: difficulty crash at sign in.

  Please update and let me know if it solves your problem. Thank you!

  -Kathleen